9685 Results for: "ENTEGRIS"

Supplier: ENTEGRIS

Glass-filled PP, white. Straight forceps for substrate handling.

Supplier: ENTEGRIS

Squeeze style
Attaches to the notches on both end walls of carrier
Overall size: 163×140×183 mm
Compatible with all 'M' style carriers

Supplier: ENTEGRIS

The point-of-use photochemical filters with superior contaminant retention and low hold-up volume performance in sub-10 to 180 nm technology nodes. Both Optimizer® D300 and D600 filters are geared to small-volume filtration of photoresists, resist dielectrics, and solvents. It requires no pre-wetting, so the filters function immediately after installation. Without the need for prewetting, they reduce the likelihood that microbubbles will form and avoid the problems associated with incomplete wetting and the mixing of incompatible chemicals.

Supplier: ENTEGRIS

These tube fittings are made from PFA.

Supplier: ENTEGRIS

These integral ferrule fittings are made from PFA.

Supplier: ENTEGRIS

These tube fittings are made from PFA.

Supplier: ENTEGRIS

GateKeeper® GPU gas purifiers were designed to improve purity consistency, lifetime and final purity. Leveraging its expertise in material science, Entegris has developed a new generation of purification products that deliver unsurpassed value and performance.

Supplier: ENTEGRIS

GateKeeper® GPU gas purifiers were designed to improve purity consistency, lifetime and final purity. Leveraging its expertise in material science, Entegris has developed a new generation of purification products that deliver unsurpassed value and performance.

Supplier: ENTEGRIS

GateKeeper® GPU gas purifiers were designed to improve purity consistency, lifetime and final purity. Leveraging its expertise in material science, Entegris has developed a new generation of purification products that deliver unsurpassed value and performance.

Supplier: ENTEGRIS

Holds a wafer or a square plate.

Supplier: ENTEGRIS

ETFE, white.

Supplier: ENTEGRIS

Made of PFA, DuPont 440.

Supplier: ENTEGRIS

The Sentry® QCIII Quick Connect System is the safest and easiest method of connecting FluoroPure® chemical containers with typical bulk chemical delivery systems. This patented connection system is key coded and uses Entegris' industry leading Flaretek® seal for the main chemical dispense line and radial seals for the remaining three ports. This new system allows the connection to be made without realigning key codes. Subsequent ports have radial seals with FEP encapsulated o-rings. This chemical dispense system incorporates a ³/₄" chemical fill/dispense port, ½" vent port, ¼" connection verification port and optional ³/₄" recirculation port.

Supplier: ENTEGRIS

Available compliant to SEMI Standard F57-0312, the specification for polymer components used in ultrapure water and liquid chemical distribution systems. All wetted parts are molded PFA providing chemical resistance suitable for use in high purity, high corrosive chemical handling applications.

Supplier: ENTEGRIS

These cartridge filters are designed for the removal of particles and microorganisms from liquids and gases. Used in clarification and prefiltration applications, these pleated filters retain contaminants primarily on the surface of the filter media. Downstream filter performance is enhanced due to efficient particle and microorganism reduction.

Supplier: ENTEGRIS

Automated, FIMS compatible SB300 FOSB provides a clean, secure environment for valuable 300 mm wafers as they move through numerous handling and transport processes.

Supplier: ENTEGRIS

Multipurpose trays for a wide range of uses.

Supplier: ENTEGRIS

For masks or reticles with pellicles. Label for identication labels. Landing pads prevent tearing of pellicies.

Supplier: ENTEGRIS

Entegris GateKeeper® GPU gas purifiers were designed
to improve purity consistency, lifetime, and final purity in
microelectronics applications where high-purity gas is critical. Leveraging our expertise in material science, we have developed a new generation of HX gas purification products that deliver unsurpassed value and performance.

Supplier: ENTEGRIS

Corrosion-resistant Galtek® check valves reduce contamination potential in your high-purity chemical applications and provide clean delivery of sophisticated chemicals.

Supplier: ENTEGRIS

High performance in a closed side wall configuration. Trends in wafer processing technology have mandated advancements in wafer carrier technology to support today's advanced semiconductor processing facilities. Wafer carriers designed for advanced wafer transport offer dramatic performance benefits over traditional low and mid-range wafer carriers.

Supplier: ENTEGRIS

The InVue® NT4400 Electronic Flowmeter is designed for use in ultra high-purity applications in the semiconductor industry and is compatible with highly corrosive processes. The flowthrough design minimizes dead volume, reducing the possibility of process contamination. This instrument features PTFE and other high purity fluoropolymers for all wetted parts.

Supplier: ENTEGRIS

These filters are designed to consistantly remove particles from a whide range of acids, bases and other process materials. Ideal for medium to high flow applications, they deliver a low cost of ownership (COO) as a dry device or prewet product ready for quick installation. Prewet cartridges prevent alcohol-chemical interactions, avoid potential contamination sources and minimise process downtime.

Supplier: ENTEGRIS

GateKeeper® GPU gas purifiers were designed to improve purity consistency, lifetime and final purity. Leveraging its expertise in material science, Entegris has developed a new generation of purification products that deliver unsurpassed value and performance.

Supplier: ENTEGRIS

These tube fittings are made from PFA.

Supplier: ENTEGRIS

Cynergy® Clamp-to-Flaretek® adapter. These adapters show standard Entegris® fitting port connections used in conjunction with Cynergy® clamp fittings.

Supplier: ENTEGRIS

These 100 mm wafer carriers are designed for optimum performance in automated operations or for processing LCDs and other small devices.

Supplier: ENTEGRIS

Straight union, with hex 5/8", Hole Ø: 5,1 mm, Length: 35,6 mm, Width: - mm, Thread: MNPT size 1/4"×1/8"

Supplier: ENTEGRIS

Wafergard®, PU tubing with fitting, 2,1 m, For: Gas filter gun, Wafergard® GN

Supplier: ENTEGRIS

Wafershield™ high purity PP