1186 Results for: "Bohlender"

Supplier: Bohlender

PTFE, white.

Supplier: Bohlender

Shelves, Stainless steel shelf with 2 aluminium rails, For: Big star and Maxi desiccators, W×D×H: 515×495×0,8 mm

Supplier: Bohlender

Made of PTFE.

Supplier: Bohlender

Thermocouple in a PTFE-encapsulated stainless steel tube.

Supplier: Bohlender

This vacuum adapter is made of PTFE with O-ring made of FKM for secure placement of standard filter cartridges made of glass or plastic on flasks with GL 45 thread.

Supplier: Bohlender

These glass fibre reinforced PA fork wrenches can be used for tightening or opening screw joints also at high working temperatures.

Supplier: Bohlender

Y-shaped connector made of PE-EX.

Supplier: Bohlender

Funnel made of PE / static dissipative PE-EX for liquid waste disposal. The funnel can be safely mounted on the waste container with its freely turnable cap that is safely fixed with the filling neck.

Supplier: Bohlender

Replacement shelf with two rails, PMMA transparent, SICCO, For: Vaccum desiccator

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the propeller completely made of PTFE.

Supplier: Bohlender

Excellent electric conductivity due to a special 'antistatic compound' made of pure PTFE and finest, highly pure carbon dust (less than 2,5%). Colour: black.

Supplier: Bohlender

Very good electric conductivity due to a special 'anti-static compound' made of pure PTFE and highly pure carbon dust (less than 2,5%).

Supplier: Bohlender

Flexible tube tag to stick on capillaries and tubes with Ext.Ø 0,4 to 6,35 mm, assorted colours (5 colours per pack).

Supplier: Bohlender

Filter body made of PE with connection thread for direct installation on barrels. Lid with aeration openings and label field to monitor service life. Filling made of activated carbon for adsorption of solvents.

Supplier: Bohlender

Adaptor for installation of capillaries with b.safe fittings at the exhaust filter connection of the b.safe waste caps.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The filling levels of waste containers in laboratory cupboards and workbenches can be reliably monitored. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: Bohlender

T-shaped connector made of static dissipative PE-EX.

Supplier: Bohlender

Insert with screw-in thread for barrels or screw cap for canisters. With integrated level indicator to monitor the liquid level during filling as well as a neck with GL 45 thread for the assembly of a b.safe funnel with GL 45 thread.

Supplier: Bohlender

Laboratory flask made of Borosilicate glass including screw cap and spout made of PP.

Supplier: Bohlender

Pipe clamp made of PE with permanently fixed power magnets. b.safe Waste Pipes can easily be clipped into the pipe clamp for tube Ext.Ø 32 mm.

Supplier: Bohlender

Used for temperature measurement in aggressive liquids and cable provides flexible connection from measuring device to medium.

Supplier: Bohlender

Magnetic stirrer heads consist of perfect capsulated drive shaft with ball bearings, rotor and lower bearing made of PTFE and a conductor made of borosilicate glass. These stirrer heads are designed with flat flanges sealed with gasket.

Supplier: Bohlender

Screw cap made of conductive black PPS-EX reinforced with glass fibres, inner parts made of conductive PTFE-EX.

Supplier: Bohlender

Straight fitting, made of PTFE, with two connectors for elastic tubing (e.g. Viton®, Tygon®, silicone).

Supplier: Bohlender

PEEK.

Supplier: Bohlender

Dimensionally stable basic vessel and screw cover made of TFM, homogenous, non porous surface.

Supplier: Bohlender

PTFE, white.

Supplier: Bohlender

Made of PTFE, white

Supplier: Bohlender

Miniature stopcocks of PTFE with male or female connection threads and stopcock plug of FEP.

Supplier: Bohlender

Magnetic stirrer heads consist of perfect combination of drive shaft with ball bearings, rotor and lower bearing made of PTFE and a conductor made of borosilicate glass.