1186 Results for: "Bohlender"
Elbow fitting system waste cap, b.safe
Supplier: Bohlender
Screw cap for thread GL 25 made of PPS with rotary elbow fitting with male thread GL 25 and drip edge at female thread GL 25.
Expand 1 Items
Fittings, b.safe
Supplier: Bohlender
Made of PFA to fix tubing in the capillary connectors (thread UNF ¹/₄") 28G) of b.safe Caps and b.safe Waste Caps. The conical seal cone clamps the tubing and seals the connection safely.
Expand 7 Items
Antistatic mats, b.safe
Supplier: Bohlender
Mat made of static dissipative material with permanently mounted grounding cable including clip for earthing connection.
Expand 1 Items
Canisters, S90, b.safe
Supplier: Bohlender
Canister with thread S90 (DIN90) for the collection of liquid waste. Canister S90 in PE-EX with transparent stripe for observing the fill level.
Expand 2 Items
b.safe Waste cap electronic fill-level control
Supplier: Bohlender
To prevent your waste canister from overflowing, connect these b.safe waste caps with electronic fill-level control to the alarm box. When the 'canister full' level is reached, you will receive an optical and acoustic warning. The alarm is triggered before your canister is completely full. This leaves a small safety buffer in the canister.
Expand 12 Items
Spiral tubing, b.safe
Supplier: Bohlender
Spiral tubing with tubing ends (length: 1×300 mm, 1×150 mm), extendible to maximum 1,5 m. With PFA fittings for tubing Ext.Ø 3,2 mm for assembly on b.safe caps.
Expand 1 Items
Canisters, S55, b.safe
Supplier: Bohlender
Canister with S55 thread (DIN51) for the collection of liquid waste.
Expand 2 Items
Antistatic corrugated tubing, b.safe
Supplier: Bohlender
Flexible corrugated tubing.
Expand 2 Items
PTFE tubing, BOLA
Supplier: Bohlender
Translucent to milky-white appearance.
Expand 1 Items
System waste caps DLC, b.safe
Supplier: Bohlender
b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The additional pre-alert enables the user to provide exchange containers for big volumes of waste e.g. before the end of work or the weekend. Reliable monitoring of the filling levels of waste canisters in laboratory cupboards and workbenches. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.
Expand 4 Items
Accessories for Sink S and XL, b.safe
Supplier: Bohlender
b.safe Lid for Sink XL, outer dimension 457×457×8 mm
Expand 2 Items
Sink S, b.safe
Supplier: Bohlender
Made of static dissipative PE-EX, with sloped bottom for complete emptying.
Expand 1 Items
Display table level sensor, b.safe
Supplier: Bohlender
Display unit to monitor connected fill-level sensors in b.safe Waste Caps and b.safe System Waste Caps.
Expand 2 Items
Mount for waste pipes, b.safe
Supplier: Bohlender
Set consisting of (1) base plate with female thread M8, (1) threaded rod M8, length 200 mm, (1) pipe clamp with female thread M8 for tube ext.Ø 32 mm, and fastening material for assembly on walls or under desktops.
Expand 1 Items
Display wall level sensor, b.safe
Supplier: Bohlender
Display unit to monitor connected fill-level sensors in b.safe Waste Caps and b.safe Waste Caps.
Expand 2 Items
Isolated amplifier, b.safe
Supplier: Bohlender
Enclosed housing for installation at the rear side of a safety cabinet. Unit provides safe signal exchange between explosion-hazardous and explosion-proof areas by galvanic isolation of the sensor side and the output side.
Expand 1 Items
Desktop mounting bracket for waste pipes, b.safe
Supplier: Bohlender
Contact area with silicone-free glue pad and 2 bores Ø 4,2 mm for non-slip fixing on the desktop.
Expand 1 Items
Multicollector, b.safe
Supplier: Bohlender
Combination of capillaries and tubes of several HPLC systems in one desktop mount.
Expand 2 Items
Angled connector, b.safe
Supplier: Bohlender
Angular piece approx. 90° made of static dissipative PE-EX.
Expand 1 Items
Screw-in fittings PG, BOLA
Supplier: Bohlender
For connection of sensors with male thread PG to BOLA reactor lids.
Expand 1 Items
Accessories and spare parts for b.safe Disc sensor
Supplier: Bohlender
Level sensor, Hook-and-loop Strips, 25×25 mm
Expand 2 Items
Tubing connectors, Y-shaped, BOLA
Supplier: Bohlender
Connectors for tubing, made of PTFE, Y-shape.
Expand 4 Items
Overhead stirrer tools, double impulse stirrer shafts, BOLA
Supplier: Bohlender
Stirrer shafts made of PTFE-jacketed stainless steel and the two paddles arranged crosswise at 90° completely made of PTFE.
Expand 2 Items
Desiccator cabinets, anti-static, SICCO maxi series
Supplier: Bohlender
Desiccator cabinets, PC ESD, have a reinforced aluminium frame with panels made of antistatic polycarbonate and an easy to read electronic hygrometer. They are mainly used for temporary storage of components for electronic products.
Expand 2 Items
Scrubber adaptors for bottles with GL thread, BOLA
Supplier: Bohlender
Screw cap made from PP, base body made from PTFE and gas inlet pipe/gas distributor made from FEP.
Expand 2 Items
Joining pieces for flat flanges, BOLA
Supplier: Bohlender
Made of aluminium.
Expand 1 Items
Magnetic stirring bars, coloured PTFE-encapsulated, BOLA
Supplier: Bohlender
Magnetic stirrer bars with coloured PTFE-encapsulated magnetic core (Alnico 5), conically tapered ends.
Expand 12 Items
Dropping funnels, conical, FEP, BOLA
Supplier: Bohlender
Dropping funnel with fine adjustment stopcock having cone size 29 made of PTFE.
Expand 3 Items
Desiccator cabinet, SICCO Star Horizontal
Supplier: Bohlender
This transparent PMMA cabinet has a reinforced aluminium frame, forward opening door with foam rubber gasket and magnetic strip. Ideal for wide products such as A3 sheets or conductor boards.