210 Results for: "Ammonium Chloride"

Supplier: Spectrum Chemical

Benzalkonium Chloride Solution, 50 Percent, NF is used in the pharmaceutical industry as an antimicrobial preservative, antiseptic, disinfectant, solubilising agent, and wetting agent. Spectrum Chemical NF products are manufactured, packaged and stored under current Good Manufacturing Practices (cGMP) per 21CFR part 211 in FDA registered and inspected facilities.

Supplier: Merck

Tetrabutylammonium chloride, Sigma-Aldrich®

Supplier: MACHEREY-NAGEL

Drinking water, for the determination of Aluminium, Ammonium, Chloride, Iron, Manganese, Sulphate, NANOCONTROL®, Multi standard, 0,50 mg/l Al(3+), 0,20 mg/l NH₄-N, 20 mg/l Cl-, 1,50 mg/l Fe3+, 1,50 mg/l Mn2+, 120 mg/l SO₄2

Supplier: Molekula

Tetrabutylammonium chloride 50% in aqueous solution

Supplier: LONZA

Ammonium-Chloride-Potassium (ACK) Lysing Buffer is used to lyse red blood cells in preparations containing white blood cells.

Supplier: Thermo Fisher Scientific

Crystal violet ACS

Supplier: Thermo Fisher Scientific

Crystal violet

Supplier: Merck

Crystal violet, Sigma-Aldrich®

Supplier: STEMCELL Technologies

Ammonium chloride solution is recommended for the lysis of red blood cells (RBCs) in preparations of human and mouse peripheral blood, spleen or bone marrow cells. It is buffered and optimised for gentle lysis of erythrocytes, with minimal effect on leukocytes. It does not contain a fixative agent, therefore leukocytes are viable following RBC lysis.

Supplier: Roth Carl

Crystal violet

Supplier: Merck

Crystal violet, Sigma-Aldrich®

Supplier: Thermo Fisher Scientific

Crystal violet 90+% ACS

Supplier: Molekula

Crystal violet

Supplier: Merck

Crystal violet, Sigma-Aldrich®

Supplier: Hach

System for Analytical Quality Assurance (AQA), consisting of one combined standard/spiking solution and two round robin test solutions.

Supplier: EHRENSTORFER

Crystal violet

Supplier: Thermo Fisher Scientific

Crystal violet, pure indicator

Supplier: MP Biomedicals

Chloride ≤0,002% Iron ≤2 ppm sulphate ≤0,002%

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MP Biomedicals

The IgG fraction is prepared from the specific rabbit antiserum by delipidation, ammonium sulfate fractionation and anion exchange chromatography. The resulting IgG fraction is dialyzed into 0.02M sodium phosphate, 0.14M sodium chloride, pH 7.3, adjusted to standard titer, filtered through a 0.22 µm filter, vialed and lyophilized. No preservative is added.

The total protein is measured using the Biuret procedure, with bovine albumin as a standard. Hemagglutination titer is standardized with an in-house control by measurement of agglutination end-point with 10% human red blood cells. Each IgG fraction is tested for purity at a minimum of 40 mg/ml using immunoelectrophoresis. The product is mostly rabbit IgG; no trace of albumin is detected.

Supplier: MP Biomedicals

Goat IgG fraction to beta-Galactosidase is used in enzyme Immunoassays, fluorescein Immunoassays, blots, cell or tissue immunostaining. Gives sharp precipitation lines in IEP and ID techniques.
The antibody is produced by hyperimmunizing goats with the enzyme beta-galactosidase from Escherichia coli. The IgG fraction is prepared by delipidation, ammonium sulfate fractionation, and anion exchange chromatography, and is further purified by solid-phase absorption to remove antibodies to non-beta-galactosidase E. coli proteins. The product is dialyzed into 0.02M sodium phosphate, 0.14M sodium chloride, pH 7.3, adjusted to standard titer, filtered through a 0.22 μm filter, and vialed. No preservative is added.

Supplier: YSI ENVIRONMENTAL

The Professional Plus is one of the most versatile multi-parameter handheld meters on the market. A combination of up to 11 parameters can be measured on a single bulkhead, including pH, ORP, ammonia, nitrate, chloride, DO, conductivity, salinity, TDS, barometric pressure and temperature, meaning only one cable is required.

Supplier: Hach

IntelliCAL™ ISECL181 is a digital, combination chloride ion selective electrode (ISE) with a non refillable, double junction reference and built-in temperature sensor. The solid-state sensor design eliminates membrane replacement and allows for dry storage of the ISE.

Supplier: Apollo Scientific

AMMONIUM CHLORIDE 1 * 1 kg

Supplier: Apollo Scientific

AMMONIUM CHLORIDE 1 * 500 g

Supplier: Apollo Scientific

Ammonium Chloride 1Kg pack 1 * 1 kg

Supplier: Apollo Scientific

AMMONIUM CHLORIDE 1 * 5 kg

Supplier: Apollo Scientific

Tetra(but-1-yl)ammonium chloride 25g pack 1 * 25 g

Supplier: Apollo Scientific

Bis(triphenylphosphoranylidene)ammonium chloride 25g pack 1 * 25 g

Supplier: Apollo Scientific

Methacrylatoethyl Trimethyl Ammonium Chloride 2.5kg pack 1 * 2,5 kg