You searched for: Pure and Ultra Pure Water Systems

Supplier: ELGA LabWater

The CENTRA-R 60, 120 and 200 offer complete water purification, storage, control and distribution systems delivering water which has been purified using reverse osmosis, UV photo-oxidization, optional deionization and 0,2 μm filtration.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

This compact unit is the perfect choice for smaller demands and an economical production. The system can be directly connected to a tap water source, pretreated water is not required.

Supplier: ELGA LabWater

Medica® 7/15 water systems are high performance water purification systems that directly feed clinical diagnostic analysers.

Supplier: Thermo Fisher Scientific

This system is a modularly designed laboratory reverse osmosis system specifically developed for functional and economical production of high purity water. Ideal for routine laboratory work: Rinsing lab glassware, supplying autoclaves, water baths and incubators, preparing and diluting buffers and reagents and general biotechnology.

Supplier: ELGA LabWater

The PURELAB flex 2 uniquely combines ease of use with the accurate delivery of pure water. The flexible modular system can be configured to deliver the quality of water you need for your applications and includes UV photo-oxidation and TOC monitoring. Delivers up to two liters per minute of type I water.

Supplier: ELGA LabWater

The CENTRA-RDS is a storage and recirculating distribution system designed to work with other CENTRA or PURELAB systems or existing purification installations. In addition to storing and distributing pure water, the CENTRA-RDS maintains and improves water purity.

Supplier: ELGA LabWater

This flexible system reliably delivers Type II water.

Supplier: ELGA LabWater

The PURELAB Chorus 2+ range provide >15 MΩ.cm pure water. The systems provide additional bacteria and inorganic quality for sensitive analytical and life science applications above that of basic laboratory work. With its simple design and ease of use, water can be dispensed from the system or from a choice of additional Halo Dispensers.

Supplier: Thermo Fisher Scientific

These water purification systems convert tap water into high purity water (Type II) and provide an integrated storage solution. Designed to continuously recirculate purified reservoir water to preserve water quality even during periods of inactivity.

Supplier: EVOQUA WATER TECHNOLOGIES

The Ultra Clear™ RO DI series system delivers permeate water with a salt reduction of approximately 98%.

Supplier: Thermo Fisher Scientific

The Pacific TII water purification system converts tap water into Type 2 high purity water.

Supplier: ELGA LabWater

PURELAB Chorus 3 provides Type III (primary RO grade) water on demand.

Supplier: ELGA LabWater

These systems are designed to deliver compliant purified water at the point of use for a wide range of washer disinfectors and autoclaves to minimise contamination risk to patients.

Supplier: ELGA LabWater

This all-in-one system is designed to couple directly with the Metrohm 941 Eluent Production Module. It has an integrated recirculation chamber that ensures a supply of ultrapure water (Type I) to Metrohm ion chromatographs that is guaranteed to be fresh.

Supplier: Thermo Fisher Scientific

This RO system with controller provides easy-to-read system parameters. Completely drainable, integrated 100 L high-purity water reservoir has a low-noise pressure booster as a standard component. The compact LabTower RO system is ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use. It serves as a built-in pretreatment unit, consisting of a hardness stabilizer for protection of reverse osmosis module from hardness formers. An activated carbon/5 μm combi-cartridge protects the system against free chlorine and particles which ensures the long service life of downstream purification stages.

Supplier: ELGA LabWater

The Purelab Flex 1 is designed to dispense water when it is connected to a reservoir or distribution loop. This system works as a dispenser as well as a simple deionisation system. It delivers Type II and Type III water, depending on the use of a DI purification pack.

Supplier: LABCONCO

WaterPro RO stations feature large capacity filters and membrane to deliver high-quality reverse osmosis (RO) purified water (type III). RO purified water is ideal for laboratory applications such as reagent preparation and glassware rinsing. The units be connected to glassware washers to provide purified rinse water.