You searched for: Water Purification Systems

Water purification systems are useful for delivering water of consistently high quality for use in most laboratory and general manufacturing applications, and most systems function to remove mineral ions such as sodium, calcium, iron, copper, chloride, and sulfate, as well as ridding water samples of inorganic solids, organics, bacteria, and pyrogens. Water purification systems are ergonomically designed, provide built-in meters or clear viewing sides for convenient monitoring of water quality.

Sort By

« ‹ 2 3 4 › »

Reverse osmosis systems, ReversinO

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

This compact unit is the perfect choice for smaller demands and an economical production. The system can be directly connected to a tap water source, pretreated water is not required.

Expand 2 Items

Ultrapure water system, LaboStar® Pro

Supplier: EVOQUA WATER TECHNOLOGIES

The LaboStar® PRO system is a cost effective means of producing analytical grade water. This extremely compact ultrapure water system can be used on a laboratory bench.

Expand 1 Items

Deioniser with changeable cartridge

Supplier: AQUADEM

The polyamide range is a set of demineralisation columns using mixed-bed ion exchange resin technology. These devices ensure deionised water production of between 5 and 15 MΏ/cm according to whether the installation type is single or double cycle.

Expand 18 Items

Deionizer, B-Pure™

Supplier: Thermo Fisher Scientific

These B-Pure™ laboratory-grade water systems are designed for pre-treatment or deionization application needs. The design provides the ability to add additional holders when the need arises. Choose from single, double or half-size holders.

Expand 2 Items

Water distilling apparatus

Supplier: GLASWARENFABRIK KARL HECHT

Complete water distilling apparatus with heater and directions for use.

Expand 1 Items

Deionizers with nylon resin canisters, behropur®

Supplier: BEHR

Mixed bed ion exchanger for small to medium quantities of ultrapure water to the supply from laboratory dishwashers to general care in the laboratory and for smaller consumers in the industry.

Expand 3 Items

Deionisers, behropur®

Supplier: BEHR

These deionisers are thick-walled, robust and practical mixed-bed ion exchangers made of blue polyethylene with free output to the storage tank. Ideal also for subsequent demineralisation of reverse osmosis system or for an ambitious aquarist.

Expand 2 Items

Deionisers, Micromeg

Supplier: ELGA LabWater

This wall mounted disposable deioniser produces water up to a quality of 10M.-cm at flows of up to 90 l/hr. Designed for users with a requirement for low volumes deionised water, the Micromeg requires no electrical input as its water quality meter is battery operated.

Expand 1 Items

Deionizer, barnstead Bantam™

Supplier: Thermo Fisher Scientific

It is a simple, cost effective method for deionisation or pretreatment of lab water. Typically these units are ideal where water usage is up to 38 litres per day.

Expand 1 Items

WaterPro® PS HPLC/UF Hybrid Polishing Station

Supplier: LABCONCO

WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

Expand 1 Items

Ultrapure water systems, Barnstead™ Smart2Pure™

Supplier: Thermo Fisher Scientific

The Barnstead Smart2Pure™ system is a compact system that converts tap water into both ASTM Type I and Type II water. It produces 3 or 6 liters of ultra-pure water per hour.