You searched for: Water Purification Systems

Supplier: ELGA LabWater

Ideal water system for a new start up lab. Advanced and affordable, providing tap to Type I water.

Supplier: ELGA LabWater

The PURELAB Chorus 2+ range provide >15 MΩ.cm pure water. The systems provide additional bacteria and inorganic quality for sensitive analytical and life science applications above that of basic laboratory work. With its simple design and ease of use, water can be dispensed from the system or from a choice of additional Halo Dispensers.

Supplier: ELGA LabWater

An ideal choice for Laboratories that require more than 20 L of type 1 water per day. The adjustable flow rate can reach 2 L/min and quality control measures guarantee ultra-pure water with a Low Level of bacteria. This compact, Lightweight device is designed and manufactured to produce ultra-pure water of the highest quality whilst ensuring ease of use and minimal maintenance requirements. The microprocessor-controlled management system ensures the unit is efficient and easy to use. An economical device for producing ultra-pure 18 MΩcm water at temperatures above 25 °C. The unit can be used for analytic applications, such as HPLC, atomic absorption, ion chromatography and molecular biology.

Supplier: MIELE

The Aqua-Soft system provides a continual supply of soft water and is suitable for water with a hardness up to 71° dH. It operates as a level controlled two-tank system, consisting of two cartridges with ion exchange resins and a salt reservoir. The resins are enriched with sodium ions. The hard water flows over the resins in the first cartridge, where calcium and magnesium ions are exchanged for sodium ions. At this time, no water is flowing through the second cartridge. When one cartridge is exhausted, the water is routed to the second cartridge by means of a hardness level selector corresponding to the hardness of the local water, which is inserted by customer service when the device is used for the first time. At the same time, the regeneration of the resins from the exhausted container is activated. For this treatment, brine (NaCl) is drawn from the salt reservoir. The reservoir must be replenished regularly with coarse salt pellets. Fill quantity approx. 25 kg.

Supplier: MIELE

Aqua purifier for two full or partial demineralisation cartridges. The casing made from white steel or stainless steel.

Supplier: Binder

This system is used to fully desalinate faucet water for BINDER climate chamber humidification systems. The ion exchanger system consists of a pressure container, a single-use filter cartridge and a pressure container lid.

Supplier: VWR Collection

This compact 'plug and play' lab water system is an ideal choice for users who need up to 20 litres of ultrapure Type I water or RO water (Type III) per day. Quality of the ultrapure product water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.

Supplier: SMEG

The water purifier can be used to produce deionised water at 0,8 to 1 μS/cm, suitable for the final rinsing of instrument washers. The system uses mixed bed resins (disposable) which can also retain silica. When the resins run out, they can simply be replaced with the MI700WP kit.

Supplier: Sartorius

Arium® mini is exclusively made of high grade materials. With its intuitive guidance, closed bag system and the practical arium® aqua stop, the unit is ideal for a daily consumption of up to 10 L of ultrapure water.

Supplier: Sartorius

The arium® comfort II system supplies ASTM Type I and Type II ultrapure water and is used for both critical applications and routine analyses. Streamlined to incorporate only the most important functions for the production of high quality ultrapure water, the arium® comfort II is a cost effective alternative for the discerning user that is also very easy to use.

Supplier: SMEG

WD4060 is a washer disinfector designed to work with two to four washing levels (up to 8 cskdin basket). The washing chamber measures 530×510×620 mm (150 litres) and has the capability of washing, chemical disinfection, thermal disinfection (up to 95 °C) and active drying with hepa filter.

Supplier: Sartorius

Directly connected to your potable feed water source, this system delivers pure water (Type III) of the highest quality.

Supplier: SMEG

WD6010 is a single or double glass drop down door washer-disinfector. washing capacity of up to 12 din baskets with 65 cm width. the drop down door allows the operator to ergonomically load and unload the baskets included in the trolley without having to lift heavy weights. also available in a version with turbo cycles (WD6010T model).

Supplier: Sartorius

The arium® basic system supplies ASTM Type I ultrapure water and is used for both critical applications and routine analyses. Streamlined to incorporate only the most important functions for the production of high quality ultrapure water, the arium® basic is a cost effective alternative for the discerning user that is also very easy to use.

Supplier: Sartorius

Compact Arium® Mini laboratory water systems have been designed for Type 1 ultrapure water requirements of 10 L per day and are ideal for use in preparation of buffers, media and samples, both in life sciences applications and in analytical laboratory procedures.

Supplier: Sartorius

It is compact, environmentally friendly, reliable and easy-to-use. arium® comfort I produces ASTM Type 1 ultrapure water and Type 3 pure water. The system contains state of the art reverse osmosis technology and a unique cartridge. arium® comfort I optimizes water consumption using the integrated iJust control unit. Applied for HPLC, GC-MS, AAS, ICP-MS, Ion chromatography, TOC-Analysis, photometry and for buffer solutions.

Supplier: Cole Parmer

Get high purity water with all-glass construction.

Supplier: Cole Parmer

Produces cold distilled water for immediate use.

Supplier: LAUDA

Water still suitable for single distillation and for bench mounting.

Supplier: Cole Parmer

Save money while maintaining high performance.

Supplier: LAUDA

Water still (fully automatic) for double distillation, suitable for both bench and wall mounting.

Supplier: SciLabware

The QWS4 will produce 4 litres/hour of pyrogen-free* distilled water from its reliable 3kW UK manufactured, chromium plated heating element.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Pressure-resistant water deionisation cartridges made from stainless steel, filled with regenerable mixed-bed resins.

Supplier: Restek

This Parker HydroGen mate deionising water system is an economical means of providing deionized water to hydrogen generators or for other uses. It removes organics, phosphates, chlorine and essentially all ionizable constituents from water supply.

Supplier: EVOQUA WATER TECHNOLOGIES

Continuous electrodeionisation is a safe, chemical-free way to take RO (reverse osmosis) water to a higher level of purity. This water deionisation unit is capable of withstanding variable pressure and can be used for many different tasks. The standard CDI-LX systems combining single modules on a frame with power supplies, controllers, piping, sample valves, cleaning connections and flow and quality monitoring instrumentation.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Ready-to-connect systems for the production of soft water.

Supplier: GLASWARENFABRIK KARL HECHT

Ion exchanger for purified water.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Pressureless water deionisation cartridge with plastic housing, filled with regenerable mixed-bed resins.

Supplier: EVOQUA WATER TECHNOLOGIES

The LaboStar™ 2UV systems economically produce ultrapure water from drinking water supply.

Supplier: EVOQUA WATER TECHNOLOGIES

Pure and Ultra Pure Water System, Disinfection kit (pack of 3)