You searched for: Samplers

Supplier: VWR Collection

The SAS Super IAQ provides the same efficiency as recorded by sampling tests conducted by Centre for Applied Microbiology & Research (CAMR-UK).

Supplier: VWR Collection

Multi-sectored samplers for sampling powders, pellets and friable materials, which may become non homogeneous in bags at various levels. The models with separate sections are mainly used for chemical or physical analysis; models with communicating sections are used for microbiological analysis.

Supplier: VWR Collection

Piston sampler, made from chromium plated brass, sterilisable. The end of the tube is sharp for puncturing boxes, bales or bags containing soft pasty material.

Supplier: Avantor

Cycle-Tap sampler is a device for sampling small quantities of solvent.

Supplier: Avantor Fluid Handling

WFI Samplers are an easy and convenient solution for obtaining perfect fluid samples from a WFI water drop.

Supplier: BURKLE

This MultiDispo zone samplers for taking samples from multiple layers of the sample material.

Supplier: BURKLE

For sampling bulk goods at depths of up to 3,5 metres, depending on the density of the bulk goods to be sampled. Inserting the sampler into the bulk goods closes the collection chamber. At the desired depth, the collection chamber is opened by withdrawing the sampler, the chamber is filled and can be pulled out and collected.

Supplier: BURKLE

PharmaPicker is designed for sampling very small quantities of highly potent or active powders for analysis. The smallest sample quantities can be collected with the PharmaPicker.

Supplier: Avantor Fluid Handling

Simple and safe removal of liquid samples.

Supplier: VWR Collection

SAS Super Pinocchio II is a microbial impaction sampler to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and the flow meter regulated to achieve the required flow rate.

Supplier: VWR Collection

SAS Super Pinocchio CR is a compact microbial impaction sampler designed to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and a flow meter to regulate and achieve the required flow rate.

Supplier: VWR Collection

White PTFE ladle.

Supplier: BURKLE

The sample is directly extracted into the original sample bottle with screw cap.

Supplier: Bertin Instruments

Coriolis® μ is a portable biological air sampler for indoor or outdoor air bio-contamination monitoring. The equipment concentrates airborne particles in a liquid sample that can be analysed afterwards using microbiological techniques.

Supplier: VWR Collection

SAS Super ISO 100 and SAS Super ISO 180 are differentiated by their airflow; this choice depends on the application, and allows continuous or sequential sampling from a few minutes to several hours. The data can be stored on the SAS instrument itself or on any remote PC.

Supplier: BURKLE

These core samplers can be used to take samples of bulk materials, which can easily become stuck or settle during sampling due to their particle form.

Supplier: VWR Collection

When environmental contamination is very low, and the number of samples to be performed is high, operational duration can be an important factor in the choice of SAS instrument. Two sampling heads that operate simultaneously to sample 1000 litres of air, in less than 3 minutes, is the solution.

Supplier: BURKLE

These disposable samplers for the highest standards do not need to be cleaned after use.

Supplier: BURKLE

Glass bottle and hose are connected in such a way that they conduct electricity and are grounded via a grounding cable. Operation: Ground the device, immerse the suction hose to the required depth, attach the adapter to the sampling bottle, generate a vacuum with the manual pump and collect the sample, remove the filled sampling bottle, close it and label it.

Supplier: BURKLE

The Vampire sampler can be used to take samples from liquids easily, even from deeper depths.

Supplier: BURKLE

This ViscoDispo sampler is for highly viscous media up to 100 000 cP. The ergonomically shaped handle and stable drawbar make the sample easier to draw.

Supplier: Hach

The Sludge Judge® sampler is designed to take accurate readings of settled solids, 5% or less, in a variety of liquids to any depth at temperatures up to 74 °C.

Supplier: BURKLE

The scratcher is designed for powders and granules that do not flow freely.

Supplier: Trajan Scientific and Medical

This gas and vapour sampler enables spot collection of environmental gas samples or low pressure gas streams in 200 cm³ impervious resealable bags.

Supplier: 3M Food Safety

3M™ Swab-sampler with Letheen broth is a convenient and quick collection device for environmental sampling and testing over small surface areas.

Supplier: BURKLE

When bulk goods are transported, they may separate out and surface samples may not be representative. The sampler is opened manually once it has reached the required depth.

Supplier: BURKLE

Material: V4A stainless steel (1.4404). Sampler for thin to viscous liquids.

Supplier: BURKLE

Novartos is the pharmaceutical zone sampler for sampling in accordance with the FDA guidelines for unit dose sampling. With the Novartos pharmaceutical samplers, multiple individual dose samples (unit dose samples) can be taken from one or more sampling points in a single sampling.

Supplier: BURKLE

Quality assurance starts with the inspection of incoming goods. An all-layer sample of bulk goods is no longer a problem with PowderProof®, the sampler for powders and granules.

Supplier: BURKLE

Hand operated vacuum pump sampler with a 2,5 metre long PVC hose, the stainless steel weight will sink the end of the hose to the required sampling depth.