Supplier: HAMILTON BONADUZ

These syringes are the Gastight® version of the original 700 series syringes and are ideal for dispensing volumes from 1 µl up to 500 µl.

Supplier: HAMILTON BONADUZ

These gas tight syringe are designed for HPLC autosamplers.

Supplier: B. Braun

PP/PS fine dosage syringes, 1 ml, ideal for tuberculin, heparin and allergy testing. Easy aspiration up to the maximum volume. The integrated needle (Ø 0,30 mm, length 12 mm, 30 G) ensures no dead space and no wasted medication. PVC-free.

Supplier: HAMILTON BONADUZ

Gas tight syringes made of borosilicate glass or PTFE with Luer tip termination.

Supplier: HAMILTON BONADUZ

These headspace syringes feature a unique Glue-Free (GF) needle attachment in combination with a High Dynamic (HD) plunger. They are designed specifically for PAL COMBI–xt® headspace autosamplers. Conventional headspace syringe needles are attached to the syringe glass body using glue (cement). Common problems are detached needles or ghost peaks due to low chemical inertness of the cement to solvents or limited resistance to higher temperature. These problems are addressed with the Glue Free High Temperature (HDHT) headspace syringes.

Supplier: HAMILTON BONADUZ

GC on-column syringes with three choices of needle: Stainless steel fixed (N), stainless steel removable (RN) or fused silica removable (RNFS).

Supplier: Thermo Fisher Scientific

Syringe, chromatography, GC, Luer tip, gas tight, Volume: 10000 µl, Pk: 1

Supplier: Poulten & Graf

Single use syringes are available with or without needles.

Supplier: HAMILTON BONADUZ

The 600 series syringes are a half stroke version of the original 700 series syringes. This series of syringes is ideal for dispensing volumes from 0,25 μl up to 5 μl. The 600 series is often used in applications that require one handed operation because of the short stroke length and the reinforced plunger.

Supplier: B. Braun

Insulin syringe made of PP/PS with round shaped cylinder with black scale.

Supplier: HAMILTON BONADUZ

The 900 series syringe is the economical version of the 800 series syringe. This series of syringes is ideal for dispensing volumes from 0,5 μl up to 10 μl. The syringe holder is permanently attached to the syringe barrel. This reduces the initial cost of the syringe but eliminates the possibility of replacement components.

Supplier: B. Braun

PP, three-piece syringe for injection of U-100 insulin (50 or 100 IU/ml) for veterinary use. Smooth action, natural latex-free plunger stoppers with double sealing ring.

Supplier: VWR Collection

Fine fixed needle, with special polished blunt tip, specific length and diameter, ensures a complete seal, preventing damage to needle seals and rotor.

Supplier: HAMILTON BONADUZ

Multi-channel gel loading syringes are designed for multiplex DNA sequencing methodologies. They can rapidly transfer 1, 8, or 12 samples to sequencing gels, 96-well plates, or nylon membranes.

Supplier: Poulten & Graf

These syringes are made of Durobax® glass with steel piston.

Supplier: HAMILTON BONADUZ

The 1000 series is a mid volume Gastight® syringe. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision machined PTFE plunger tip which creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe barrel free of sample. This feature is particularly useful with heterogeneous samples as it reduces the chance that a deposit will occur and cause the plunger to freeze.

Supplier: B. Braun

2-piece hypodermic syringes with Luer connector for single use with detached hypodermic Sterican® needle.

Supplier: Thermo Fisher Scientific

Syringe, chromatography, GC, Removable needle, Volume: 5 µl, Type of tip: Cone, Gauge: 26s, Length: 42 mm, Pk: 1

Supplier: HAMILTON BONADUZ

The syringe guide comes with a syringe installed from the factory. This eliminates the assembly step which can lead to damage of the smaller volume syringes. This is especially critical for 7000 series syringes which have extremely small plunger wires.

Supplier: HAMILTON BONADUZ

These syringes are used for GC autosamplers.

Supplier: HAMILTON BONADUZ

These syringes allow the collection, storage, transport and analysis of liquid or gaseous samples without the danger of evaporative loss or environmental contamination.

Supplier: B. Braun

Latex free single use syringe with integrated cannula for subcutaneous injection of U-100 insulin (50 or 100 IU/ml).

Supplier: B. Braun

Single use syringes for manual use, with green plunger. Easy aspiration up to the maximum volume. Barrel made from PP and plunger from PE.

Supplier: Thermo Fisher Scientific

GC Autosampler syringes for use with Agilent GC instruments.

Supplier: HAMILTON BONADUZ

The 700 series syringe is the original hand-fitted Hamilton syringe. This series of syringes is ideal for dispensing volumes from 0,5 to 500 µl. The stainless steel plunger is manufactured to fit the glass barrel with a tolerance smaller than 100 millionths of an inch, resulting in unsurpassed syringe life. Each syringe is manufactured to achieve the highest level of accuracy and precision possible.

Supplier: HAMILTON BONADUZ

The 1800 series is the reinforced plunger version of the 1700 series syringe. Attached to the flange of the syringe is a removable blue syringe holder that prevents heat transfer, dispense inaccuracies and plunger blow outs. It also provides support to small volume plungers that are prone to bending during injection.

Supplier: HAMILTON BONADUZ

Syringes are designed and tested to meet critical autosampler performance needs.

Supplier: B. Braun

Sterile, disposable, three-piece, made from PP, latex- and PVC-free.

Supplier: HAMILTON BONADUZ

X-Type syringes are perfectly suited for sensitive LC samples such as proteins, peptides, phospholipids or smaller amines.

Supplier: HAMILTON BONADUZ

CTC PAL® autosamplers are able to sample from many different vial and well types and have ultimate platform flexibility. The syringe is the most important part of every injection that the HPLC PAL® system performs. These autosampler syringes are specially designed for use in these HPLC PAL® systems: PAL® HTC-xt, PAL® HTS-xt, PAL® HTX-xt sold under the following brands: AB Sciex, Agilent, Alpha M.O.S., Antek, Bruker, Dionex, GE, Gerstel, GL Sciences, Lauda, LEAP Technologies, MicroCal, MPS, Perichrom, PerkinElmer, Shimadzu, Sotax, Thermo Scientific, Waters and Zoex.