You searched for: Retort Stands
Retort stands to hold burettes, flasks, and other labware during procedures are available at VWR. Sets include both stainless steel rod and base, constructed of your choice of plastic or cast iron. A polypropylene retort stand is offered for severe corrosive conditions. Bases of cast iron coated with enamel are featured in rectangular, tripod, U-shaped and A-shaped options. Different rod lengths for the support of different diameters of labware are also supplied through VWR, as well as retort rings and clamps.
VWR®, Large H Stands (B)
Supplier: VWR Collection
H-shaped stands with nickel-coated steel rod and 420×400 mm grey marbled cast iron baseplate.
Expand 2 Items
VWR® Labomeca®, Feet for rods
Supplier: VWR Collection
Mounting brackets for Labomeca® assemblies.
Expand 2 Items
VWR®, Curved Base Stand
Supplier: VWR Collection
PU coated cast iron stand, high grade steel rod 500×12 mm.
Expand 1 Items
VWR® Stand with Holder for Funnels
Supplier: VWR Collection
PU coated, cast iron stand (200×450 mm), steel rod (500×12 mm), bosshead and holder for four funnels.
Expand 1 Items
VWR® Stand with Holder for Separating Funnels
Supplier: VWR Collection
PU coated cast iron stand 200×450 mm, steel rod 500×12 mm, bosshead and holder for two funnels.
Expand 1 Items
VWR®, Laboratory Stands
Supplier: VWR Collection
Tripod stands (A): Cast iron tripod stand, painted with hammer finish, steel support rod, nickel plated.
Expand 9 Items
VWR®, Support Stand, Rectangular Base, Cast Iron
Supplier: VWR Collection
Cast iron support stand bases are constructed with black enamel finish for chemical resistance and durability.
Expand 1 Items
Roller Bar Platforms for VWR® Standard and Advanced Shakers
Supplier: VWR Collection
Glassware platforms with four clamping bars and rubber mat.
Expand 2 Items
VWR®, Levelling Platform with Bubble Level
Supplier: VWR Collection
The use of levelling platforms in electrophoresis can be a big help in maintaining a uniform gel thickness and therefore a uniform and quality sample separation.
Expand 2 Items
Clamp base, flexible
Supplier: USBECK Laborgeräte
Zinc die-casting and brass, nickel plated.
Expand 1 Items
Tripod stands
Supplier: USBECK Laborgeräte
Retort stand base in tripod shape made from powder-coated steel.
Expand 2 Items
Stand plates
Supplier: USBECK Laborgeräte
Steel, powder coated. Firm, non slip stand. For a wide variety of uses. With M10 threaded hole on face side.
Expand 5 Items
Drum holder for placing filling containers, V2A
Supplier: BURKLE
The storage area of the drum holder can be adjusted for height and provides a place for setting down the filling container directly under the discharge of drum pumps. This prevents the danger of the liquid splashing while being poured from a high height – for example if the filling container is standing on the floor.
Expand 1 Items
Stand for b.safe canister, S50
Supplier: Bohlender
Space saving stainless steel stand for two S50 canisters.
Expand 1 Items
Stand bases, tripod
Supplier: USBECK Laborgeräte
Powder-coated steel, thickness 10 mm.
Expand 2 Items
Subframes for IF/IFplus
Supplier: MEMMERT
Frame, Subframe, on castors (size 110 to 160: height 560 mm), for IF 160plus
Expand 4 Items
Mounting brackets
Supplier: SCHOTT AG Lighting and imaging
Brackets, EasyLED Spotlight Plus column adapter for Zeiss stand K, stand M
Expand 7 Items
Base with clamps, flexible
Supplier: USBECK Laborgeräte
Foot made of die-cast zinc with flexible 300 mm long three-finger clamp, nickel plated brass.
Expand 1 Items
Stands for Imhoff sedimentation cones or seperatory funnels, SP Bel-Art
Supplier: Bel-Art Products, a Part of SP
This high-density polyethylene rack holds four separatory funnels on the lower shelf or four long-stem funnels on the upper shelf [maximum funnel diameter 98 mm (3⅞")].
Expand 1 Items
Magnetic stand
Supplier: G-Biosciences
Magnetic stand is designed for the efficent pull down of magnetic beads in 1,5 and 2 ml micro centrifgue tubes.
Expand 1 Items
Stand bases
Supplier: USBECK Laborgeräte
Stainless steel. Firm, non slip stand for a wide variety of uses. With an M10 threaded hole on face side and adjustable feet for uneven surfaces.
Expand 7 Items
Stand for burettes
Supplier: Brand
PP (baseplate) and stainless steel (support rod).
Expand 1 Items
Retort stands
Supplier: USBECK Laborgeräte
Stainless steel. Can be used for a wide range of equipment, e.g. stirrers, hotplates etc.
Expand 2 Items
Stand for Imhoff funnels
Supplier: BURKLE
PP, chrome-plated steel. The stand for sedimentation funnels is used to keep, hold or store Imhoff funnels safely and reliably during sedimentation.
Expand 1 Items
Acrylic Imhoff cone rack, Nalgene®
Supplier: Thermo Fisher Scientific
Securely hold three Imhoff cones with the durable and transparent Thermo Scientific™ Nalgene™ Acrylic Imhoff Cone Rack, featuring a wide base for stability on the lab bench.