You searched for: Chromatography Columns

Supplier: PerkinElmer

These cartridge columns are capable of very rapid analysis and has a reliable performance.

Supplier: OMNIFIT

EZ columns are designed to suit the majority of standard laboratory chromatography applications. They are ideal for aqueous systems and compatible with solvents used in common liquid chromatography applications such as protein purification.

Supplier: OMNIFIT

EZ SolventPlus™ columns are designed for maximum chemical compatibility. Borosilicate glass and PTFE construction, with Chemraz® o-rings and PTFE frits, only the most inert materials are present in the fluid path. ETFE end caps and fitting nuts ensure a chemically inert connection into and out of the system.

Supplier: VICI JOUR RESEARCH

The in-line PEEK guard cartridges extend the life of analytical columns by trapping contaminants from the sample and mobile phase, thereby preventing loss of retention. Only PEEK and titanium contacts the mobile phase and sample. This system is ideal for use with proteins or other biopolymers that may be contaminated or absorbed by steel surfaces.

Supplier: Agilent

Bond Elut™ online SPE cartridges are designed for use with liquid chromatography (LC) to provide sample cleanup, and in certain applications, pre-concentration.

Supplier: PerkinElmer

These superficially porous particle (SPP) columns produce sharper peaks and faster separation results due to their breakthrough particle design and size.

Supplier: KNAUER

These endcapped Eurospher I columns are used in the determination of water soluble vitamins, steroids, catecholamines, sedatives and many other applications fields.

Supplier: Agilent

Captiva EMR–Lipid provides highly selective and efficient lipid/matrix removal without unwanted analyte loss.

Supplier: PerkinElmer

The MPLC cartridge system allows direct coupling of an analytical and NewGuard™ cartridge without introduction of any dead volume. A specific cartridge holder (30, 100, 220 mm) is required for each cartridge length.

Supplier: Agilent

Bond Elut™ Plexa polymeric SPE offers simple extraction methods, minimal method development, and improved extract cleanliness, for a wide range of applications.

Supplier: VICI JOUR RESEARCH

These PEEK columns are designed for naro-bore applications with small amount of samples.

Supplier: Merck

NUCLEOSIL® C18 columns with octadecyl modified silica phase for HPLC.

Supplier: BEHR

Glass column with GL45 on both ends, GS 950, according to LUA bulletin no. 20, Ø int.: 60,00 mm, Length: 320 mm, Capacity: 950 ml

Supplier: Agilent

Bond Elut™ C18 is a hydrophobic silica sorbent. C18 is commonly used for non-polar compounds. Bond Elut™ C18 is endcapped to reduce interactions with silanol groups.

Supplier: UPCHURCH SCIENTIFIC

This narrow-bore short column (2,0×20 mm) creates only a slight pressure increase with virtually no detectable theoretical plate loss when used with a 3 mm int.Ø or larger column.

Supplier: OPTIMIZE TECHNOLOGIES

Combining a versatile selection of packed beds and the use of a convenient quick-connect holder, OPTI-LYNX™ provides numerous options for chromatographers for on-line or off-line sample clean-up and pre-concentration.

Supplier: WATERS

µBondapak® C18 columns are general purpose, silica-based, reversed phase C18 columns that are based on 10 µm particle technology.

Supplier: WATERS

XTerra® MS C8 columns are general purpose, hybrid-based, reversed phase C8 columns that are designed to be compatible with mass spectrometry applications. These first generation columns provide superior pH stability compared to a silica based column.

Supplier: WATERS

XTerra® RP18 columns are general purpose, hybrid-based, reversed phase C18 columns that incorporate Waters patented embedded polar group technology to improve peak shape performance for highly basic compounds. These first generation columns provide superior pH stability compared to a silica-based column.

Supplier: WATERS

Styragel® HR columns are high-resolution GPC columns packed with 5 µm particles and are ideal for characterising samples in the low to mid molecular range where high resolution is critical.

Supplier: WATERS

These columns complement the ACQUITY BEH C18 and C8 phases and provide a necessary and powerful tool for HPLC method development. The embedded carbamate group in the bonded phase ligand provides alternate selectivity, especially for phenolic compounds compared to straight chain alkyl columns.

Supplier: WATERS

Atlantis HILIC silica columns are used in combination with high organic mobile phases (>80% acetonitrile) to provide retention of analytes that are simply too polar to be retained by reverse-phase chromatography.

Supplier: WATERS

Nova-Pak® C18 columns are general purpose, silica based, reversed phase C18 columns that are based on 4 µm particle technology.

Supplier: WATERS

Specially designed for monitoring aldehydes in indoor air.

Supplier: WATERS

XBridge™ BEH C18 sorbent can be used over an entire range of mobile phase pH (1 to 12). The trifunctionally bonded C18 ligand provides you with a universal column for most HPLC separations and gives you the widest usable pH range, superior low pH stability, and ultra-low column bleed.

Supplier: WATERS

µBondapak® C18 columns are general purpose, silica-based, reversed phase C18 columns that are based on 10 µm particle technology.

Supplier: WATERS

SunFire™ columns provide symmetrical peak shapes for improved resolution. With new bonding and endcapping technologies, they offer great efficiency for acid, neutral, and basic compounds at low and intermediate pH ranges. They are compatible with mass spectrometry applications, providing sharp peaks, high sensitivity, large peak capacities and very low bleed.

Supplier: WATERS

Symmetry® C8 columns feature monofunctionally bonded C8 ligands on a high purity base-deactivated silica.

Supplier: WATERS

Symmetry® C18 columns feature monofunctionally bonded C18 ligands on a high purity base-deactivated silica.

Supplier: WATERS

Column type: HPLC column, µBondapak®, Phenyl, Ø int.: 3,90 mm, Length: 300 mm, Pore size: 125 Å, Particle size: 10 µm