You searched for: Closures

Supplier: Bohlender

To avoid spill over of canisters through the connection of a waste cap capacitive to a b.safe Display for electronic level control. With the use of b.safe waste tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: S.C.A.T.

Helpful supplies for the safe use of SCAT and SymLine products safety caps and safety waste caps.

Supplier: S.C.A.T.

For simple and safe pouring of fluids from containers.

Supplier: Bohlender

To prevent your waste canister from overflowing, connect these b.safe waste caps with electronic fill-level control to the alarm box. When the 'canister full' level is reached, you will receive an optical and acoustic warning. The alarm is triggered before your canister is completely full. This leaves a small safety buffer in the canister.

Supplier: Bohlender

Screw cap made of PPS for GL 45 thread, free movable insert made of PTFE.

Supplier: Bohlender

Screw cap for thread GL 25 made of PPS with rotary elbow fitting with male thread GL 25 and drip edge at female thread GL 25.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The additional pre-alert enables the user to provide exchange containers for big volumes of waste e.g. before the end of work or the weekend. Reliable monitoring of the filling levels of waste canisters in laboratory cupboards and workbenches. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: S.C.A.T.

Safety waste caps safely connect pipework to the waste container. The integrated exhaust filter blocks solvent vapours, for the protection of health and the environment.

Supplier: Bohlender

For collection of HPLC waste in Justrite® Disposal safety cans. Compatible with the standard quick-disconnect couplings in polypropylene and stainless-steel.

Supplier: Bohlender

b.safe Cap PFAS Analytic, free from polyhaloolefins, unrestrictedly switable for PFAS analysis.

Supplier: S.C.A.T.

Special version of the SafetyCaps V2.0 for use in the preparative HPLC environment with larger tubing connections and air valves with a higher flow rate.

Supplier: S.C.A.T.

Safety Caps for PFAS Analytic feature a polypropylene core, which is free from PFAS to ensure the accuracy of PFAS testing without interference from the cap material. All associated accessories such as fittings, blind plugs, and ventilation valves are also PFAS-free.

Supplier: Bohlender

Safe collection of hazardous waste is an important part of the laboratory work routine. b.safe waste caps connect waste lines from your HPLC/UHPLC leak-tight with your waste container. The waste caps are available in various sizes to fit your specific waste container safely.

Supplier: Bohlender

Screw cap for canister thread, freely turnable spout tube, rigid or flexible design with integrated safety aeration for constant flow.

Supplier: Brand

PP caps, PE seal, DE-M marking.

Supplier: BURKLE

Dropper cap with captive cap, for threads Ø 25 mm, Thread: 25 mm, For bottles: 250/500/1000 ml

Supplier: KARTELL

LDPE.

Supplier: SCHUELKE MAYR

Spray pump for 500 and 1000 ml bottles.

Supplier: Thermo Orion

These membrane caps help to reduce probe servicing time and eliminate assembly problems. Convenient screw-on membrane caps help ensure optimal probe performance.

Supplier: MUELLER KREMPEL

The spray caps with DIN 18 ring and protective cap are suitable for use with 10 to 100 ml dropping bottles.

Supplier: MUELLER KREMPEL

Spray pump, white, For: vaporiser bottles 100 ml, Thread: GL 20

Supplier: MUELLER KREMPEL

Glass pipette mounts for dropping bottles with white PE screw cap and blue rubber hat.

Supplier: Corning

Transfer cap for optimum growth with with ¹/₄" Barb connection.

Supplier: RIXIUS

Screw lids made of white coloured plastic PP.

Supplier: Corning

Transfer caps with two ports. One port ends in a 50 mm, 0,2 μm filter disc and the other port is C-Flex Tubing ending in either a male Luer lock or a male polycarbonate quick connect.

Supplier: Brand

Cap with dropper nozzle for dropping bottle, Thread: GL 25, LDPE, For bottles: 250+500 ml

Supplier: Hach

Dropper cap, with 0,5 and 1,0 ml marks on glass barrel

Supplier: Bel-Art Products, a Part of SP

PP, durable, chemical resistant.

Supplier: Restek

Plug, PEEK, 1/4" - 28 threads

Supplier: Restek

Safety-coated bottle, 1 l, graduated, GL-45 threads