You searched for: Standards

Supplier: Restek

The mix consists of diesel fuel #2 composite, unleaded gasoline composite.

Supplier: Restek

Consists of 11 components, those are bromoxynil, 2,4-d, dicamba, 2,4-dichlorophenol, diclofop methyl, dinoseb, pentachlorophenol, picloram, 2,4,5-t, 2,3,4,6-tetrachlorophenol and 2,4,6-trichlorophenol.

Supplier: M S A

The gas mixture in calibration gas cylinder is certified to be prepared gravimetrically, using NIST traceable weights. The lot number and nominal value of the gas constituents in volume, percent by mass, PPM, or volume is specified on the cylinder.

Supplier: Restek

Contains: Aniline (62-53-3); Benzidine (92-87-5); 4-Chloroaniline (106-47-8); 3,3'-Dichlorobenzidine (91-94-1); Diphenylamine (122-39-4)*; 2-Nitroaniline (88-74-4); 3-Nitroaniline (99-09-2); 4-Nitroaniline (100-01-6); N-Nitrosodimethylamine (62-75-9); N-Nitrosodi-n-propylamine (621-64-7); Pyridine (110-86-1)

Supplier: Restek

The mix consists of (C5) n-pentane, (C9) n-nonane, (C10) n-decane, benzene, n-butylcyclohexane, 2,5-dibromotoluene (SS), ethylbenzene, 2-methylpentane, methyl tert-butyl ether, naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane, m-xylene, o-xylene, p-xylene.

Supplier: Restek

610 PAH calibration mix A contains acenaphthene (1000 μg/ml), acenaphthylene (1000 μg/ml),anthracene (1000 μg/ml), benz(a)anthracene (500 μg/ml), benzo(a)pyrene (500 μg/ml), benzo(b)fluoranthene (500 μg/ml)
benzo(k)fluoranthene (500 μg/ml), benzo(ghi)perylene (500 μg/ml), chrysene (500 μg/ml), dibenz(a,h)anthracene (500 μg/ml), fluoranthene (500 μg/ml), fluorene (1000 μg/ml), indeno(1,2,3-cd)pyrene (500 μg/ml), naphthalene (1000 μg/ml), phenanthrene (500 μg/ml), pyrene (500 μg/ml).

Supplier: LGC Standards PROMOCHEM

This standard reference material is intended to use in the evaluation of methods used for the analysis of sludges and other materials of a similar matrix. These are dried and pulverised domestic sludge.

Supplier: Restek

This contains perfluorotributylamine (PFTBA).

Supplier: Restek

Calibration check mix, 8270 acid, 2000 µg/ml each in methylene chloride, : N/A, 1 ml/ampoule

Supplier: Restek

8040 Surrogate mix contains 2-fluorophenol, 2,4,6-tribromophenol.

Supplier: Restek

This spike mix contains two components: 1-Chlorooctadecane and o-Terphenyl.

Supplier: EHRENSTORFER

Stable isotope labelled product type, mixture format, dichloromethane solvent.

Supplier: Restek

Calibration mix contains Bis(2-ethylhexyl)phthalate, benzyl butyl phthalate, di-n-butyl phthalate, diethylphthalate, dimethylphthalate, di-n-octyl phthalate.

Supplier: Restek

The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane.

Supplier: Restek

Base/neutral matrix spike mix, includes acenaphthene, N-nitroso-di-n-propylamine, 1, 4-dichlorobenzene, pyrene, 2, 4-dinitrotoluene, 1, 2, 4-trichlorobenzene, 1000 µg/ml each, : N/A, Matrix: MeOH, 1 ml/ampoule

Supplier: CANNON INSTRUMENT

CANNON silicone viscosity standards are intended for use with rotational viscometers only.

Supplier: LGC Standards PROMOCHEM

This solution is intended for use as a calibration or reference standard for the analysis of these analytes in biodiesel or related organic matrices according to ASTM D6751. Sulfur is present in the raw materials and is not certified.

Supplier: Restek

625 kit contains 604 phenols calibration mix: 4-chloro-3-methylphenol (59-50-7), 2-chlorophenol (95-57-8), 2,4-dichlorophenol (120-83-2), 2,4-dimethylphenol (105-67-9), 4,6-dinitro-2-methylphenol (dinitro-o-cresol) (534-52-1), 2,4-dinitrophenol (51-28-5), 2-nitrophenol (88-75-5), 4-nitrophenol (100-02-7), pentachlorophenol (87-86-5), phenol (108-95-2), 2,4,6-trichlorophenol (88-06-2), benzidines calibration mix: benzidine (92-87-5), 3,3'-dichlorobenzidine (91-94-1), 606 phthalate esters calibration mix: bis(2-ethylhexyl)phthalate (117-81-7), benzyl butyl phthalate (85-68-7), di-n-butyl phthalate (84-74-2), diethylphthalate (84-66-2), dimethylphthalate (131-11-3), di-n-octyl phthalate (117-84-0),31032: 607 nitrosamines calibration mix, n-nitrosodimethylamine (62-75-9), n-nitroso-di-n-propylamine (621-64-7), n-nitrosodiphenylamine (86-30-6),31033: 609 nitroaromatics & isophorone calibration mix: 2,4-dinitrotoluene (121-14-2), isophorone (78-59-1), 2,6-dinitrotoluene (606-20-2), nitrobenzene (98-95-3),31011: sv calibration mix #5/610 pah mix: acenaphthene (83-32-9), acenaphthylene (208-96-8), anthracene (120-12-7), benz(a)anthracene (56-55-3), benzo(a)pyrene (50-32-8), benzo(b)fluoranthene (205-99-2), benzo(k)fluoranthene (207-08-9), benzo(ghi)perylene (191-24-2), chrysene (218-01-9), dibenz(a,h)anthracene (53-70-3), fluoranthene (206-44-0), fluorene (86-73-7), indeno(1,2,3-cd)pyrene (193-39-5), naphthalene (91-20-3), phenanthrene (85-01-8), pyrene (129-00-0),31034: 611 haloethers calibration mix, bis(2-chloroethoxy)methane (111-91-1), bis(2-chloroethyl)ether (111-44-4), 4-bromophenyl phenyl ether (101-55-3), 4-chlorophenyl phenyl ether (7005-72-3), 2,2'-oxybis(1-chloropropane) (108-60-1),31035: 612 chlorinated hydrocarbons calibration mix: 2-chloronaphthalene (91-58-7), 1,2-dichlorobenzene (95-50-1), 1,3-dichlorobenzene (541-73-1), 1,4-dichlorobenzene (106-46-7), hexachlorobenzene (118-74-1), hexachlorobutadiene (87-68-3), hexachlorocyclopentadiene (77-47-4), hexachloroethane (67-72-1), 1,2,4-trichlorobenzene (120-82-1).

Supplier: LGC Standards PROMOCHEM

NIST-1921B, Polystyrene film - IR transmission wavelength

Supplier: LGC Standards PROMOCHEM

This reference standard is intended for daily use in conjunction with measurement of elements in surface waters. The water solution contains 45 elements with concentrations traceable to
ultrapure metals or stoichiometrically well-defined substances.

Supplier: LGC Standards PROMOCHEM

This standards reference material is intended to use in the determination of constituent elements in clay and material of similar matrix. These powdered clay was air-dried, ball-milled and blended to ensure homogeneity.

Supplier: Restek

This 610 PAH calibration mix B idela for LC-UV detection.

Supplier: Restek

607 Nitrosamines calibration mix contains N-nitrosodimethylamine, N-nitroso-di-n-propylamine, N-nitrosodiphenylamine.

Supplier: Restek

This extraction solvent stock solution contains: n-decane (C10) (20 µl/l), n-tetracontane (C40) (20 mg/l).

Supplier: Restek

The mix consists of diesel fuel #2 composite, mineral oil.

Supplier: Restek

These solutions are prepared from a single-source (one-refinery) product.

Supplier: Restek

Components in this mix (0,5 μl/ml or 0,05% volume/volume each) are at 10X the concentration of the final test solution specified in ASTM 1618 and ASTM 1387.

Supplier: Restek

The weathered materials indicate the percent weight loss from the original material. Prepared from a single source (one refinery) product.

Supplier: Restek

It consists of benzene, 1,2-dibromoethane, 1,2-dichloroethane, ethylbenzene, isopropylbenzene (cumene), 2-methylnaphthalene, methyl tert-butyl-ether (MTBE), naphthalene, toluene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene and p-xylene.

Supplier: Restek

Tripentyltin chloride, 2000 μg/ml in methylene chloride, : N/A, 1 ml/ampul