You searched for: Chromatography Supplies

Supplier: Agilent

These graphite platforms and tubes for PerkinElmer graphite furnace AA systems are quality tested to ensure every batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance, and lifetime.

Supplier: Restek

This adaptor is suitable for for Agilent 5890/6850/6890/7890 GCs.

Supplier: VARIAN

Graphite tubes are quality tested to ensure each batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance and lifetime.

Supplier: Restek

Injection port weldments for Agilent GCs for use with purge and trap systems. This can easily attach your purge and trap with pre-installed low dead volume fittings.

Supplier: Restek

For use with thermo scientific trace and focus GCs.

Supplier: Restek

Micropacked inlet conversion kits are used to convert a capillary GC split/splitless inlet for use with ¹/₁₆" Ext.Ø micropacked columns.

Supplier: Restek

This kit contains the tubing and fittings needed to add an additional GC to lab bench.

Supplier: Restek

Frit adaptors

Supplier: Agilent

The Quick-Connect torch module for PerkinElmer ICP-OES includes the torch, mounting block, 2 mm alumina injector, Scott spray chamber, and Cross-Flow nebuliser.

Supplier: Restek

These capillary dedicated FID replacement jet for Agilent 5890/6850/6890/7890 GCs are available in standard, high-temperature or Siltek treated high-performance versions.

Supplier: VARIAN

Load and Lock 4003 column, spare parts kit

Supplier: VARIAN

SPME fibers are available in a range of chemistries, formats, and for use with autosamplers or manual injections.

Supplier: Restek

Z-Belt for use with Agilent 7673B and 7683 autosamplers.

Supplier: Restek

These direct injection glass inserts are suitable for 6,35 mm packed column injection ports.

Supplier: Restek

FID/NPD capillary adapter fitting, high-quality stainless steel, for Agilent 5890/6850/6890 GC's

Supplier: Restek

Flow splitters with fluid resistor technology eliminate the adjustments to the capillary tubing for optimising split ratio with wide range of interchangeable resistors.

Supplier: Restek

Injector mounting post for Agilent 7673 series autosamplers, for use with 6890 GCs

Supplier: Agilent

Loop, 2000 µl, metal, includes two 1/16 stainless steel nuts and two stainless steel ferrules

Supplier: Agilent

Rotor seal, PEEK, for 7010/7000/7040 series

Supplier: Restek

This easy to use adapter fitting is sturdy and made of compact stainless steel.

Supplier: Restek

Autosampler plunger carrier belt for Agilent 7673A and 7673B autosamplers.

Supplier: VARIAN

RheBuild® kits containing genuine Rheodyne® parts are available for most Rheodyne® products. RheBuild® kits eliminate the need to order individual parts.

Supplier: Restek

A complete column packing system which is used to pack the analytical HPLC columns.

Supplier: Agilent

The ISIS 3 dramatically increases the productivity of both the Agilent 7800 ICP-MS and the Agilent 7900 ICP-MS while also allowing high matrix samples to be run for extended periods of time.

Supplier: Agilent

These ion lenses are equivalent to the PerkinElmer ICP-MS versions for complete confidence.

Supplier: Agilent

The HSDC is comprised of a fused silica cell body and removable capillaries. The light path through the cell is made from black fused silica which significantly minimizes stray light and defines the aperture for the diode-array spectrometer.

Supplier: Agilent

Filters for PerkinElmer ICP-OES systems.

Supplier: Agilent

These coils are equivalent to PerkinElmer ICP-MS coils for complete confidence.

Supplier: Agilent

These inlet liners prevent adsorption and ensure accurate sample transfer onto the GC column through a robust deactivated surface. These liners are recommended for trace level analysis of active analytes. Liners with inert wool retain non-volatiles, prolonging column life and lowering frequency of MS source maintenance.

Supplier: Agilent

These performance maintenance kits for Waters HPLC systems contain all the normal wear parts, tools for disassembly/reassembly, and instructions necessary to keep your systems operating at peak performance.