You searched for: Chromatography Supplies

Supplier: Restek

This reservoir kit is used to restore the performance of bonded-phase capillary columns by dissolving and removing soluble, nonvolatile residue. The rinsing reservoir is equipped with 6,4 mm inlet and outlet connections and includes a built-in fritted disk to prevent particulate matter from contaminating the column.

Supplier: Restek

Replacement parts for Shimadzu HPLC systems.

Supplier: VARIAN

Solid phase microextraction (SPME) is a technique for extracting analytes from solid, liquid or gaseous samples by adsorbing them onto the SPME fiber and then desorbing them into an inlet, either on a gas chromatograph (GC) or an HPLC system. SPME is amenable to automation using an autosampler or it can be performed manually as well.

Supplier: Restek

These Vu-tight Direct injection (DI) liners are suitable for 6,35 mm packed injection port conversion. They are available in two designs and fit 0,32 and 0,53 mm ID capillary columns (column outer diameter from 0,5 mm to 0,8 mm).

Supplier: Restek

For use with Parker Balston® zero air generators.

Supplier: Restek

The oven sensors works in conjunction with the oven control board to regulate oven temperature.

Supplier: Restek

These capillary dedicated FID replacement jet for Agilent 5890/6850/6890 GCs are available in standard, high-temperature or Siltek treated high-performance versions.

Supplier: Agilent

These PEEK sample loops are inert to most organic solvents. The stainless-steel sample loops are not interchangeable due to the change in port angle.

Supplier: Restek

This direct injection liner adapter uses standard 1,59 mm capillary nut and ferrules. Can be used with Agilent or Restek direct injection glass inserts or Restek direct injection uniliner liners for an Agilent 5890 packed column GC.

Supplier: Agilent

The Agilent sampling probe is equivalent to the PerkinElmer AA version, and is robust in daily use.

Supplier: Agilent

Agilent burner components for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Restek

This column protection system has three levels of protection: filter only, cartridge only, or filter and cartridge.

Supplier: Agilent

These support adaptors are fully compatible with your PerkinElmer ICP-MS.

Supplier: Agilent

These torches for PerkinElmer ICP-OES are available in a wide range of styles from 0 to 3 slots, depending on the instrument and your application needs.

Supplier: Restek

Accelerated solvent extraction is a common technique for fast and reliable extraction of organic materials from solid matrices, using EPA SW-846 method 3545 and pressurised fluid extraction (PFE).

Supplier: Restek

This HPLC PEEK performance kit is a useful complement for the HPLC system.

Supplier: Restek

This sample delivery system is used to transfer large volumes of low viscosity samples directly from a bottle to a solid phase extraction cartridge or to a disk on a vacuum manifold system for extraction or cleanup.

Supplier: Restek

These adapters are made of high quality stainless steel.

Supplier: Agilent

These pistons are made from a high purity, mono-crystalline sapphire for maximum durability.

Supplier: Agilent

QuickPick purged packed inlet PM kit, with 5 non-stick BTO septa, 1 O-ring, 1 ferrule and 1 disposable glass liner

Supplier: Agilent

The micro ECD has a detection zone volume 10 times smaller than any other ECD with replicable inlet liner to decreasing column contamination of the cell.

Supplier: Agilent

High quality off-axis design ion lenses separate ions from photons and residual neutral material resulting in lower background noise in 7500 ICP-MS systems.

Supplier: Restek

FID maintenance kits for use with Agilent 6850, 6890, and 7890 GCs.

Supplier: Agilent

The 5100 ICP-OES features a plug and play torch, and a simple and effective torch-loader mechanism. This automatically aligns the torch and connects the gases to ensure fast start-up and reproducible performance.

Supplier: Agilent

Needle assembly, use with PEEK seat for standard autosampler

Supplier: Agilent

The electron multiplier converts incident ions into an amplified electric current used to record measurements of the ion signal in ICP-MS Systems.

Supplier: Agilent

These support adaptors are fully compatible with your PerkinElmer ICP-OES.

Supplier: Restek

Use these liners for increased sensitivity. They are manufactured from borosilicate glass or metal.

Supplier: Restek

This FID/injector cleaning kit can be used wih any injection ports.

Supplier: Restek

These FID collector assembly kits are made of high-quality stainless steel. Ideal for Agilent 5890/6850/6890/7890 GCs.