You searched for: Petroleum Industry Standards
Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.
Diesel fuel #2 (ASTM Class 5 Accelerant)
Supplier: Restek
These solutions are prepared from a single-source (one-refinery) product.
Expand 4 Items
Petrochemical standard, regular diesel fuel 2500 µg/ml in methanol, Dr. Ehrenstorfer
Supplier: EHRENSTORFER
Regular diesel fuel, 2500 µg/ml in methanol, Reference standard
Expand 1 Items
ASTM D2887-12 calibration standard (20 components)
Supplier: Restek
Designed to serve as a column resolution text mixture, as well as a calibration mixture for retention time (RT) versus boiling point (bp) calibration.
Expand 1 Items
Why Choose Corning Fetal Bovine Serum?
Our vertically integrated FBS serum supply chain, from collection to scientist, allows us to provide a consistent supply of FBS.
DHA PiONA standard (133 components)
Supplier: Restek
This standard is produced for refineries performing Detailed Hydrocarbon Analysis (DHA) of crude oil feedstocks and fuels.
Expand 1 Items
Residual range calibration verification standard (CVS)
Supplier: Restek
SAE30 motor oil:SAE40 motor oil (1:1).
Expand 1 Items
Unleaded gasoline composite standards for UST monitoring
Supplier: Restek
Unleaded gasoline composite standards are comprised of three separate sources each of 87, 89, and 93 octanes blended in equal portions.
Expand 7 Items
Glycols standard
Supplier: Restek
The glycol standard consists of two components they are ethylene glycol and propylene glycol.
Expand 1 Items
DRO mix (Tennessee/Mississippi) (16 components)
Supplier: Restek
DRO mix (Tennessee/Mississippi), 1000 μg/ml each in methylene chloride, Pk Info: 1 ml/ampoule
Expand 1 Items
Biodiesel calibration standards
Supplier: Restek
The biodiesel component is methyl soyate.
Expand 10 Items
Diesel fuel #2 composite standard
Supplier: Restek
Diesel fuel composite standards are comprised of three separate sources blended in equal portions. It may exhibit lot-to-lot variation.
Expand 2 Items
PCB-free transformers oil for sample dilution and analysis
Supplier: Restek
A mineral oil-based transformer oil (Exxon® Univolt® N-61), which has been tested to ensure it is PCB-free.
Expand 2 Items
Fuel oil #6 standards
Supplier: Restek
A high-viscosity residual type of heavy fuel oil requiring preheating to 104 to 127 °C. This material is also known as residual fuel oil (RFO) or Bunker C.
Expand 3 Items
TX TPH calibration mix (2 components)
Supplier: Restek
The mix consists of diesel fuel #2 composite, unleaded gasoline composite.
Expand 1 Items
Weathered diesel fuel #2 kit
Supplier: Restek
The kit consists of different standards.
Expand 1 Items
Aviation gas standard
Supplier: Restek
100-octane, low-lead fuel used in piston-type aircraft.
Expand 1 Items
ASTM D3606 calibration standard #4 with sec-butanol internal standard (3 components)
Supplier: Restek
Consists of three components, those are benzene, 2-butanol and toluene.
Expand 1 Items
Residual range calibration standard (RCS)
Supplier: Restek
SAE30 motor oil:SAE40 motor oil (1:1).
Expand 1 Items
NW TPH-HCID surrogate mix (2 components)
Supplier: Restek
The mix consists of (C25) n-pentacosane, 1-bromo-4-fluorobenzene (BFB).
Expand 1 Items
MA VPH surrogate standard (2,5-dibromotoluene)
Supplier: Restek
2,5-Dibromotoluene, 10000 µg/ml in P and T methanol, Pk Info: 1 ml/ampoule
Expand 1 Items
DRO/ORO calibration standard
Supplier: Restek
This consists of 10W30 motor oil:diesel fuel #2 (1:1 blend).
Expand 1 Items
Motor oil composite standard
Supplier: Restek
Motor oil composite, 50000 μg/ml in methylene chloride, Pk Info: 1 ml/ampoule
Expand 1 Items
JP-8 military fuel standard
Supplier: Restek
JP-8 military fuel standard, 50000 μg/ml in methylene chloride, Pk Info: 1 ml/ampoule
Expand 1 Items
ASTM D3606 calibration standard #6 without internal standard (2 components)
Supplier: Restek
Contains two components, those are benzene and toluene.
Expand 1 Items
ASTM D3606 calibration standard #7 without internal standard (2 components)
Supplier: Restek
Contains two components, those are benzene and toluene.
Expand 1 Items
Diesel #2/mineral oil (2 components)
Supplier: Restek
The mix consists of diesel fuel #2 composite, mineral oil.
Expand 1 Items
ASTM® D3606 calibration standard #1 with sec-butanol internal standard (3 components)
Supplier: Restek
Consists of three components, those are benzene, 2-butanol and toluene.
Expand 1 Items
Kerosene (ASTM Class 4 accelerant)
Supplier: Restek
These solutions are prepared from a single-source (one-refinery) product.
Expand 4 Items
Stoddard solvent standard
Supplier: Restek
Stoddard solvent, a petroleum distillate mixture of C7-C12 hydrocarbons, consists of three major groups of components: linear and branched alkanes-also known as paraffins (30 to 50%); cycloalkanes-also called cycloparaffins or naphthenes (30 to 40%); and aromatic hydrocarbons (10 to 20%).
Expand 1 Items
WA EPH aromatic hydrocarbon mix (6 components)
Supplier: Restek
The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane.
Expand 1 Items
ASTM D3606 quality control standard with sec-butanol internal standard (3 components)
Supplier: Restek
Contains three components, those are benzene, 2-butanol (sec-butyl alcohol) and toluene.
Expand 1 Items
: Integra
: EPPENDORF
: Integra
: OZ BIOSCIENCES
: VWR Collection
: SenseAnywhere
: NANOENTEK
: VWR Collection
: Integra
: Sartorius
: Quantabio