You searched for: Petroleum Industry Standards

Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.

Sort By

« ‹ 1 2 3 › »

Sulphur in diesel fuel, standard solutions, Specpure®

Supplier: Thermo Fisher Scientific

Sulphur in diesel fuel, standard solutions, Specpure®

Expand 6 Items

Standards, sulphur in light mineral oil standard solution, Specpure®

Supplier: Thermo Fisher Scientific

Standards, sulphur in light mineral oil standard solution, Specpure®

Expand 24 Items

Sulphur in kerosene standard solutions, Specpure®

Supplier: Thermo Fisher Scientific

Specpure® calibration standards, designed specifically for the analysis of sulphur in petroleum products by X-ray fluorescence spectrometry.

Expand 8 Items

Corning Life Sciences

Why Choose Corning Fetal Bovine Serum?

Our vertically integrated FBS serum supply chain, from collection to scientist, allows us to provide a consistent supply of FBS.

Buy Now

Sulphur in heavy mineral oil standard solutions, Specpure®

Supplier: Thermo Fisher Scientific

Specpure® calibration standards, designed specifically for the analysis of sulphur in petroleum products by X-ray fluorescence spectrometry.

Expand 23 Items

System Calibration Standard (7 components)

Supplier: CPACHEM

System calibration standard with 7 components.

Expand 1 Items

Petrochemical standard, bio diesel fuel, Dr. Ehrenstorfer

Supplier: EHRENSTORFER

Bio diesel fuel, Reference standard

Expand 1 Items

Diesel #2/Motor Oil (2 components)

Supplier: Restek

Diesel fuel #2 composite and Motor oil.

Expand 1 Items

ASTM® D3606 calibration standard #1 without internal standard (2 components)

Supplier: Restek

The mix consists of benzene (5% vol/vol), toluene (20% vol/vol).

Expand 1 Items

ASTM D3606 calibration standards with MEK internal standards

Supplier: Restek

ASTM D3606 calibration standard #7 with MEK internal standard, isooctane includes benzene, 0,0576%, 2-butanone, 4%, toluene 0,48%, Pk Info: 1 ml/ampoule

Expand 7 Items

Method 1664 oil and grease mix (2 components)

Supplier: Restek

Contains two components, those are n-hexadecane and stearic acid.

Expand 1 Items

Petroleum standard, regular unleaded gasoline, 2500 µg/ml in methanol, Dr. Ehrenstorfer

Supplier: EHRENSTORFER

Regular unleaded gasoline 2500 µg/ml in methanol, Reference standard

Expand 1 Items

Gasoline component standard, 10 components

Supplier: Restek

Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfy your ISO requirements.

Expand 1 Items

Petroleum standard, regular unleaded gasoline 10000 µg/ml in methanol, with certified content of BTEX, Dr. Ehrenstorfer

Supplier: EHRENSTORFER

Regular unleaded gasoline, 10000 µg/ml in methanol, with certified content of BTEX, Reference standard

Expand 1 Items

ASTM D2887-12 calibration standard (20 components)

Supplier: Restek

Designed to serve as a column resolution text mixture, as well as a calibration mixture for retention time (RT) versus boiling point (bp) calibration.

Expand 1 Items

Unleaded gasoline composite standards for UST monitoring

Supplier: Restek

Unleaded gasoline composite standards are comprised of three separate sources each of 87, 89, and 93 octanes blended in equal portions.

Expand 7 Items

Diesel fuel #2 composite standard

Supplier: Restek

Diesel fuel composite standards are comprised of three separate sources blended in equal portions. It may exhibit lot-to-lot variation.

Expand 2 Items

Gasoline range organics, VOA Mix

Supplier: Restek

GRO mix (EPA) with 9 components, includes benzene, 1, 2, 4-trimethylbenzene, ethylbenzene, 2, 2, 4-trimethylpentane, heptane, m-xylene, 2-methylpentane, o-xylene, toluene, in purge and trap methanol, 1 ml/ampule

Expand 2 Items

ASTM® D3606 backflush standard (2,2,4-trimethylpentane (isooctane))

Supplier: Restek

ASTM D3606 backflush standard (2,2,4-trimethylpentane (isooctane)), 5% vol/vol in nonane, Pk Info: 1 ml/ampoule

Expand 1 Items

WA EPH aromatic hydrocarbon mix (6 components)

Supplier: Restek

The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane.

Expand 1 Items

ASTM D3606 calibration standard #3 with sec-butanol internal standard (3 components)

Supplier: Restek

Consists of three components, those are benzene, 2-butanol and toluene.

Expand 1 Items

DHA aromatics standard (37 components)

Supplier: Restek

This standard is produced for refineries performing Detailed Hydrocarbon Analysis (DHA) of crude oil feedstocks and fuels.

Expand 1 Items

Weathered gasoline kit #2

Supplier: Restek

These solutions are prepared from a single-source (one-refinery) product. The weathered materials indicate the percent weight loss from the original material. Samples of regular- and premium-grade unleaded gasoline were collected, then blended in equal volumes.

Expand 1 Items

Diesel fuel #2 (ASTM Class 5 Accelerant)

Supplier: Restek

These solutions are prepared from a single-source (one-refinery) product.

Expand 4 Items

Certified aromatics in gasoline, 16 components

Supplier: Restek

Confirms unleaded gasoline TPH, BTEX and aromatics in single analysis.

Expand 1 Items

TX TPH calibration mix (2 components)

Supplier: Restek

The mix consists of diesel fuel #2 composite, unleaded gasoline composite.

Expand 1 Items

Diesel range organic standard (EPA/WISC)

Supplier: Restek

DRO mix (EPA/wisconsin) with 10 components, includes n-decane (C10), n-eicosane (C20), n-dodecane (C12), n-docosane (C22), n-tetradecane (C14), n-tetracosane (C24), n-hexadecane (C16), n-hexacosane (C26), n-octadecane (C18), n-octacosane (C28), with 2000 μg/ml each in methylene chloride in 1 ml/ampule

Expand 3 Items

PCB-free transformers oil for sample dilution and analysis

Supplier: Restek

A mineral oil-based transformer oil (Exxon® Univolt® N-61), which has been tested to ensure it is PCB-free.

Expand 2 Items

MA VPH matrix spike mix with surrogate (14 components)

Supplier: Restek

The MA VPH matrix spike mix consists of 14 components they are (C5) n-pentane, (C9) n-nonane, benzene, 2,5-dibromotoluene (SS), ethylbenzene, 2-methylpentane, methyl tert-butyl ether (mtbe), naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane (isooctane), m-xylene, o-xylene and p-xylene.

Expand 1 Items

MA VPH standard with surrogate

Supplier: Restek

The MA VPH standard consists of 14 components they are (C5) n-pentane 1000 μg/ml, (C9) n-nonane 1000 μg/ml, benzene 500 μg/ml, 2,5-dibromotoluene (SS) 1000 μg/ml, ethylbenzene 500 μg/ml, 2-methylpentane 1500 μg/ml, methyl tert-butyl ether (MTBE) 1500 μg/ml, naphthalene 1000 μg/ml, toluene 1500 μg/ml, 1,2,4-trimethylbenzene 1000 μg/ml, 2,2,4-trimethylpentane (isooctane) 1500 μg/ml, m-xylene 1,000 μg/ml, o-xylene 1,000 μg/ml and p-xylene 1,000 μg/ml.

Expand 1 Items

Calibration mix D2887 (17 components)

Supplier: Restek

D2887 calibration mix contains compound, conc.; (C6) n-hexane (110-54-3), 6% w/w; (C7) n-heptane (142-82-5), 6% w/w; (C8) n-octane (111-65-9), 8% w/w; (C9) n-nonane (111-84-2), 8% w/w; (C10) n-decane (124-18-5), 12% w/w; (C11) n-undecane (1120-21-4), 12% w/w; (C12) n-dodecane (112-40-3), 12% w/w; (C14) n-tetradecane (629-59-4), 12% w/w; (C16) n-hexadecane (544-76-3), 10% w/w; (C18) n-octadecane (593-45-3), 5% w/w; (C20) n-eicosane (112-95-8), 2% w/w; (c24) n-tetracosane (646-31-1), 2% w/w; (c28) n-octacosane (630-02-4), 1% w/w; (C32) n-dotriacontane (544-85-4), 1% w/w; (C36) n-hexatriacontane (630-06-8), 1% w/w; (C40) n-tetracontane (4181-95-7), 1% w/w; (C44) n-tetratetracontane (7098-22-8), 1% w/w.