You searched for: Filters

Supplier: Sartorius

These cellulose nitrate membranes are suitable for air monitoring.

Supplier: Whatman products (Cytiva)

A standard grade filter for boiler water analysis.

Supplier: Sartorius

These smooth filter papers are made of refined pulp and linters with more than 95% alpha-cellulose content. The ash content of these filter papers is between 0,1 and 0,15%.

Supplier: Whatman products (Cytiva)

A fast to medium fast filter with high wet strength offering medium retention.

Supplier: Whatman products (Cytiva)

A very thick filter with high wet strength. Offers medium to slow flow rate and retains very fine precipitates.

Supplier: Merck

Ultrafiltration cut disc membranes are available in Ultracel® regenerated cellulose and Biomax® polyethersulvone (PES).

Supplier: Merck

Vented Millex®-GS filter units are syringe filters for sterilisation of low volume aqueous solutions where venting is desired.

Supplier: ROBU GLASFILTER

VitraPOR® cylindrical filter candle-blanks are ideal for custom filter assemblies. The conical shape ensures secure fitting, while the porous glass delivers precise and reliable filtration performance.

Supplier: Sartorius

These sterile cellulose nitrate and PES Microsart® e.motion membrane filters can be used for colony counting, particle testing and microscopy. They are specifically designed for use in the Microsart® e.motion dispenser.

Supplier: Merck

The bi-directionally supported Millex-GP50 filter is a sterilising filter for aqueous solutions. It removes microorganisms, particles, precipitates, and undissolved powders larger than 0,22 μm. This single-use product consists of a 0,22 μm membrane filter sealed in an acrylic housing.

Supplier: Sartorius

Membrane filters manufactured from high grade PC film using track etch technology. Applicable for particulate analysis, epifluorescence miroscopy, fluid clarification, cytology, cell biology, bioassays, water microbiology, environmental analysis.

Supplier: Merck

Ultrafree®-MC centrifugal devices are single-use, disposable PP filters used for removing particulates from aqueous biological solutions. Devices are available with a range of microporous membranes for fast filtration and highly reproducible performance.

Supplier: Cytiva (Formerly Pall Lab)

Naturally hydrophilic highly versatile laboratory membrane filter.

Supplier: Whatman products (Cytiva)

A polyester backed and highly consistent membrane for use with low viscosity samples in a lateral flow assay.

Supplier: Whatman products (Cytiva)

A general qualitative filter with creped surface. Widely used in industrial laboratories and students laboratories for routine filtration.

Supplier: Merck

Millex Samplicity® Filters for the Samplicity® filtration system.

Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Merck

Hydrophobic edge membranes are standard MF-type filters with edges rendered hydrophobic to 3 or 6 mm widths. In antibiotic and bacteriostatic drug sterility testing by membrane filter method, the 6 mm wide non-wetting edge prevents drug intrusion under holder sealing rim.

Supplier: Sartorius

Cellulose nitrate hydrophilic membrane filters. For sample pretreatment, particle testing and chemotaxis.

Supplier: Whatman products (Cytiva)

Compared with quadrant-folded filters, Cytiva's Whatman Grade 2V pre-folded filter paper exposes extra surface area, which enables a higher loading capacity and shorter filtration time.

Supplier: Merck

Optimized for the concentration and recovery of genomic DNA with SDS buffer. The low nonspecific binding characteristics of the membrane and the other device components, coupled with its medical-grade O-ring seal, allow the device to accommodate several wash steps with minimal sample loss.

Supplier: Merck

Filter cartridge, Progard 2, pretreatment pack, long, filters large particle

Supplier: Sartorius

These smooth filter papers are made of refined pulp and linters with more than 95% alpha-cellulose content. The ash content of these filter papers is between 0,1 and 0,15%.

Supplier: Cytiva (Formerly Pall Lab)

Protects valves and pump components from damage due to liquids. Protects laboratory personnel from potential biohazards, airborne and aerosol contaminants.

Supplier: Whatman products (Cytiva)

Grade 604½ Qualitative Filter Papers for coarse precipitates. Maintains flow rate due to the reduction in filter paper contact with funnel side and the self-supporting shape of the filter itself.

Supplier: Whatman products (Cytiva)

Whatman Grade 1 Qualitative Filter Papers are the most widely used filter paper for routine laboratory applications, qualitative analytical separations, and clarifying liquids. They are the standard grade cellulose filter papers for medium flow rates.

Supplier: Merck

The Hydromillex syringe filter is used downstream in a Technecium Generator to prevent particles of radioactive technecium from getting through to the collection vial where the liquid is collected.

Supplier: Merck

Syringe filters with hydrophobic PVDF membrane. Used in vacuum line protection, transducer protection and gas filtration. Available as either 25 mm or pump-driven Millex®-FG₅₀ 50 mm diameter filters.

Supplier: ENTEGRIS

The UPE membrane of these filters eliminates pre-wetting, which optimises the full use of the membrane and ensures maximum flow.