You searched for: Filters

Supplier: Merck

The Viresolve^® pro solution provides a comprehensive, flexible template solution for viral clearance within mAb and recombinant protein bioproduction. This proven viral clearance solution delivers the highest levels of retention assurance and productivity across a broad range of feed stream characteristics.

Supplier: Restek

These indicating hydrocarbon traps for air compressors remove oil vapours and mist as it passes compressed air from an oil-filled air compressor. Indicator changes from pale pink to deep pink.

Supplier: Restek

This gas purification system with triple gas trap is ideal for purifying carrier gas and it contains oxygen, moisture, and hydrocarbon scrubbers in one cartridge.

Supplier: Restek

Moisture trap reduces water to less than 10 ppb. Indicator changes from yellowish green to blue at 5% relative humidity. A 10 μm frit prevents microparticulate damage to needle valves and flow controllers.

Supplier: Hach

This membrane filtration set can be used for filtration of turbid samples for the determination of dissolved ingredients.

Supplier: Restek

CarboFrit™ plugs are specifically designed to be slightly larger in OD than the 4 mm ID of glass liners. This allows the plug to conform to the ID of the glass liner, preventing voids in the packing.

Supplier: Thermo Fisher Scientific

The cartridge is designed for non-pressure applications, it includes 1 cm barbed hose connections on each end. The 100% virgin polypropylene cartridge rinses to high quality quickly. A colour indicator shows when the resin cartridge is exhausted.

Supplier: VICI JOUR RESEARCH

The air inlet valve has a check valve which blocks vapours of the solution in a bottle, preventing the vapours from escaping into the lab. The safety air outlet filter regulates the pressure during helium sparging.

Supplier: VARIAN

PP frit, are made with high-grade, clean PE for clean extracts.

Supplier: Sartorius

Sartocon® Slice cassettes are made of the same materials and construction and, therefore, the identical flow path length as the Sartocon cassettes, used for larger-scale production. The scale-up and the scale-down is perfectly linear throughout the range of applications, from cell harvesting to protein purification and concentration.

Supplier: Sartorius

Tangential flow cassette, Sartocon®, Membrane: Hydrosart®, Filtration area: 1000 cm², Pore size: 0,2 µm

Supplier: UPCHURCH SCIENTIFIC

These filters are designed to seal and filter simultaneously by incorporating a frit into the body of a flat-bottom ferrule.

Supplier: Roth Carl

Membrane filter, Membrane: PTFE

Supplier: Merck

The EZ-FIT^® filtration unit is a single-use filtration device made of white, gridded, and mixed cellulose esters (MCE) membrane with a blue base integrating a cellulose support pad. It provides a safe and fast way of performing membrane filtration by avoiding the exposure to the risks of microbiological analysis.

Supplier: Restek

These purge and trap spargers are designed for use with Tekmar purge-and-trap instruments only and manufactured to tight tolerances to ensure a leak-tight seal.

Supplier: DWK Life Sciences

This microfiltration adapter assembly is designed to allow connection of a 47 or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread.

Supplier: Merck

The EZ-FIT^® filtration unit is a single-use filtration device made of white, gridded, and mixed cellulose esters (MCE) membrane with a blue base integrating a cellulose support pad. It provides a safe and fast way of performing membrane filtration by avoiding the exposure to the risks of microbiological analysis.

Supplier: Restek

These 6 mm frits are manufactured from fine, chromatographic grade 316 stainless steel and different sizes are available to fit most column and pore sizes. Compatible frit have to be chosen by checking its pore size with particle size of the packaging in the column.

Supplier: Roth Carl

These flow-through filters are made of PTFE. The filter membrane can be replaced easily by unscrewing the sample funnel. Plastic tubing can be connected with olives.

Supplier: Merck

MicropreSure on-line filtration sampler improves in-process microbiological testing for bottled water. It uses the pressure in tanks or pressurized lines to process and collect samples through a microporous membrane within an enclosed chamber, securely locked without leaks.

Supplier: RAININ

Filter, centrifugal, Receiver tube with double cap, Receiver tubes with sample caps

Supplier: CHRIST MARTIN

Accessory for freeze dryer, －

Supplier: VARIAN

Chromatography paper is used in thin layer chromatography applications such as evaluating radioisotope purity, QC testing.

Supplier: Sartorius

Hydrosart® membranes are stabilised cellulose based membranes that have been optimised for the biotechnological and pharmaceutical industry. It is a stable polymer that features a broad pH range. Hydrosart® is also extremely hydrophilic, making it non-protein binding, virtually non-foul and has extremely high flux. Membrane regeneration, storage and depyrogenation can be accomplished by using NaOH even at elevated temperatures. These features make Hydrosart® an ideal membrane for biological applications.

Supplier: Roth Carl

Hydrophilised PTFE allows filtration of aqueous solutions without prior wetting. Can be used with all standard HPLC solvents.

Supplier: PerkinElmer

Gas contacts only glass, metal and the adsorbents for purity. The Drierite® indicator and molecular sieve 5A are packed in glass protected by an outer plastic tube in the event that the glass breaks. Unique loading design allows operation in any orientation without channeling.

Supplier: VOLZ LUFTFILTER

For prefiltration in aerial engineering devices. These mats are used for heat ventilation and air conditioning devices, prefiltration in air-conditioning systems, prefiltration for painting and drying plants.

Supplier: VOLZ LUFTFILTER

Types V300S and V400S can be used for general industrial paintings. Types V500S and V600G can be used for final filtration of supply air in painting and paint-spraying units.

Supplier: Roth Carl

Syringe filter, Housing material: PP, Membrane material: Nylon, Non sterile, Pore size: 0,45 µm, Filtration area: 4,52 cm², Ø: 33 mm

Supplier: NEUBERT VOLUME GLASSWAERE

Ideal for the filtration of substances sensitive to oxidation and hydrolysis. With filter plate, one-way cock and two standard ground-nuts.