You searched for: Filters

Supplier: VICI JOUR RESEARCH

The Last Drop filter/sparger combines filtration and sparging in a single unit. The PTFE housing contains a mobile phase filter with either a stainless steel or PTFE filter element. Connect the solvent line to the stepped connector, which accommodates 1,5, 2,2, and 3,5 mm ID tubing. A 1/4"-28 fitting connector connects a 1/8" helium line connects to the 10 µm sparger. Both connectors are PEEK.

Supplier: GLASWARENFABRIK KARL HECHT

Filter cartridge, Type: Spare cartridge for Aquademat mixed-bed deioniser

Supplier: Restek

This trap removes hydrocarbons and other contaminants. It fits in GC oven for easy thermal recharging.

Supplier: Restek

This thermal gas purifier removes oxygen, water, carbon monoxide, carbon dioxide, hydrocarbons (except methane) to ppb levels which is pure enough for MS.

Supplier: Agilent

Activated hydrocarbon trap packed with activated charcoal, should be used mainly for removing the trace amounts of hydrocarbons and organics from
carrier gases. Water and other contaminants, which cannot be trapped by the activated charcoal, may be removed by a Molecular Sieve 5A trap.

Supplier: Restek

Packed with an extremely high surface area, baked coconut shell based activated carbon.

Supplier: Restek

This gas management system removes moisture, hydrocarbons, and oxygen from carrier gas, extending column lifetime.

Supplier: Agilent

Oxygen/moisture traps have two functionalities in the same trap. These traps are disposable. In addition to inert gases (nitrogen, helium, argon and krypton), the Agilent OT3 trap treats streams of hydrogen, alkanes, alkenes, aliphatic hydrocarbon gases, low boiling aromatics, carbon dioxide, carbon monoxide, and argon-methane.

Supplier: Restek

This molecular sieve S-trap is suitable for traping water vapour and also increases column and oxygen trap lifetime.

Supplier: Agilent

Indicating moisture traps are available in plastic and glass bodies.

Supplier: Restek

These high-capacity moisture traps are purged with ultra-high-purity helium and are ready to be used with any carrier gas including hydrogen.

Supplier: Restek

High-capacity split vent traps reduce the release of hazardous materials from the capillary split vent into the lab.

Supplier: UPCHURCH SCIENTIFIC

These in-line MicroFilters effectively protect columns from particles originating in the mobile phase or sample, or from pump seal and sample injection valve wear.

Supplier: Agilent

This renewable gas purification system not only traps large quantities of contaminants and lasts a long time, but it is also recyclable. With average use a replacement cartridge has to be purchased once per year or after approximately 20 cylinders' worth of purification.

Supplier: Restek

Click-on traps measure 215,9×31,75 mm.

Supplier: Restek

These traps have a heavy-walled with glass body, protected by PC sleeve, which prevents oxygen and water infusion. Indicator changes from light green to grey as oxygen is trapped.

Supplier: ELGA LabWater

The Ultra is available in five versions that specifically meet the different needs of the laboratories. Ultra Scientific delivers ultrapure water continuously. Its 2-cartridge pack ensures a constant water supply that meets the most demanding applications of scientists. Ultra Ionic meets the requirements of applications as critical as those of chromatography or spectrophotometry by eliminating residual ionic and organic fractions from pretreated water. Ultra Analytic by integrating a 185 nm UV lamp produces water with an exceptionally low TOC level (2 ppb). Display of TOC level in ppb. Ultra Bioscience ensures the production of ultramureal pyrogen-free water (in vitro fertilization, cell cultures). Ultra Genetic incorporates a 185nm UV lamp and an ultrafiltration module. Display of TOC level in ppb.

Supplier: AQUADEM

These cartridges are compatible with the Compact water purification units.

Supplier: Merck

Durapore® Millipak® Final Fill Capsules

Supplier: Purite

Filter cartridge, PT8 Pretreatment catridges for Analyst and HP models (40, 80, 160)

Supplier: Merck

The Viresolve^® pro solution provides a comprehensive, flexible template solution for viral clearance within mAb and recombinant protein bioproduction. This proven viral clearance solution delivers the highest levels of retention assurance and productivity across a broad range of feed stream characteristics.

Supplier: Restek

These indicating hydrocarbon traps for air compressors remove oil vapours and mist as it passes compressed air from an oil-filled air compressor. Indicator changes from pale pink to deep pink.

Supplier: Restek

This gas purification system with triple gas trap is ideal for purifying carrier gas and it contains oxygen, moisture, and hydrocarbon scrubbers in one cartridge.

Supplier: Restek

Moisture trap reduces water to less than 10 ppb. Indicator changes from yellowish green to blue at 5% relative humidity. A 10 μm frit prevents microparticulate damage to needle valves and flow controllers.

Supplier: SciLabware

This filteration system is used for microbiology and preparation of HPLC solvents. It is used with 47 mm Ø membranes.

Supplier: Hach

This membrane filtration set can be used for filtration of turbid samples for the determination of dissolved ingredients.

Supplier: Agilent

Big universal trap (H₂), ⅛" fittings, For: GC, GC/MS

Supplier: Restek

This trap reduces the release of hazardous materials from the ECD vent into the lab.

Supplier: Restek

These high-capacity oxygen trap removes up to 135 ml of oxygen or 2 g of water.

Supplier: Merck

High throughput: Each cartridge contains 150 membranes. Less frequent reloading saves time.

Visible traceability: The membrane catalog number, lot number, pore size and sequential number (from 150 to 1) are printed on the protective film of every membrane cell.