Supplier: Whatman products (Cytiva)

Cytiva's Whatman Grade 44 quantitative paper is a thin version of Grade 42 ashless paper. The thinness reduces the overall ash content, making Grade 44 well suited for analyses relying on ash-free dry weight.

Supplier: Whatman products (Cytiva)

Whatman™ QM-H is a pure quartz fibre filter for use in testing acidic gases, stacks, flues and aerosols. It has low heavy metal content so it is well suited for heavy metals analysis.

Supplier: Avantor

Discs are pre-assembled for use in preparing aqueous samples for analysis. Laminar configuration provides filtration capacity and inlet characteristics that maximise access of analyte molecules to the micro-particulate sorbent. Disc design resists clogging and ensures high throughput rates even when samples contain solids.

Supplier: ENTEGRIS

Superior retention performance for ultra-clean, point-of-use filtration of photoresist and photochemical solvents.

Supplier: Whatman products (Cytiva)

A creped paper for coarse particles, offers a very high filtration speed.

Supplier: Merck

The Sterivex™ filter unit has a compact design ideal for large volume filtration using positive pressure.

Supplier: Cytiva (Formerly Pall Lab)

Useful for prefiltration of particulate laden aqueous samples, serum filtration and dissolution testing.

Supplier: Whatman products (Cytiva)

Low phosphate cellulose papers approximately 1,5 ppm phosphate, for the filtration of calcium lactate extracts from soil samples for the determination of K and P according to Egnér, Riehm and Lederle.

Supplier: Cytiva (Formerly Pall Lab)

Supracap™ 100 depth filter capsules with PP housing are scalable capsules with Seitz® high performance depth filter media. They are suitable for process development and pilot scale applications.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are suitable for water quality parameter measurement and air filtration applications. They can be used for high efficiency, general purpose laboratory filtration, including water pollution monitoring of effluents, for filtration of water, foodstuff analyses, protein filtration, and radioimmunoassay of weak β emitters.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are specified for water pollution monitoring, cell harvesting, liquid scintillation counting and air pollution monitoring. They are often used in total suspended solids analysis.

Supplier: Merck

The filters without binder resin retain their structural integrity without weight loss when heated up to 500 °C and can therefore be used in gravimetric analysis as well as for the filtration of hot gases.

Supplier: Whatman products (Cytiva)

These borosilicate glass filters are particularly useful for liquid clarification and liquid scintillation counting.

Supplier: MOTIC

Panthera, Didymium filter (Ø 45 mm)

Supplier: Whatman products (Cytiva)

Whatman Grade GF 92 glass microfiber filters from Cytiva are designed for prefiltration in order to protect against membrane fouling. Grade GF 92 is strengthened with an inorganic binder.

Supplier: G-Biosciences

These C18 spin columns are ready-to-use micro centrifuge columns for peptide clean up and concentration. The columns consist of porous C18 reverse-phase resin that has a particle size of ~15 µm and a pore size of 300 Å. The resin offers highly efficient binding and recovery of peptides and is ideal for mass spectrometry and other peptide related applications.

Supplier: G-Biosciences

These disposable spin columns are designed for protein purification. These spin columns are uniquely designed, with a snap off end converting to a closure for the column for easy manipulation and use.

Supplier: Merck

If your waste samples contain non-volatile or semi-volatile substances or metals, use this hazardous waste filtration system for saparation, extratction, and filtration. Developed in collaboration with the US Environmental Protection Agency (EPA), the system is designed specifically for the US EPA Extraction Procedure (EP) Toxicity Test and Toxicity Characteristic Leaching Procedure (TCLP). The device separates solid and liquid phases of waste samples for analysis.

Supplier: Cytiva (Formerly Pall Lab)

The Pall Nanosep device for nucleic acid binding (NAB) incorporates a dual layer silica-based quartz glass fiber media to allow for efficient binding of DNA and RNA, while providing smooth flow and rapid processing of samples.

Supplier: Cytiva (Formerly Pall Lab)

Optimised to provide the most consistent results when analysing ionic species. Certified for low level extractables detected by conductivity.

Supplier: Cytiva (Formerly Pall Lab)

Contrasting hydrophilic modified black PES membrane for microbiological analysis.

Supplier: Whatman products (Cytiva)

A thin paper with great wet strength and a very high flow rate. Frequently used in technical applications such as the filtration of viscous liquids and emulsions (e.g., sweetened juices, spirits and syrups, resin solutions, oils, or plant extracts).

Supplier: DWK Life Sciences

Filtration apparatus with unit made from clear DURAN® borosilicate glass 3.3, PTFE insert and anodised aluminium clamp.

Supplier: Cytiva (Formerly Pall Lab)

Simplifies scale up and minimises revalidation; no need to change membrane materials during transition to pilot or production. PP housing; four membrane chemistries assure compatibility with a wide range of fluids.

Supplier: Cytiva (Formerly Pall Lab)

Certified hydrophilic mixed cellulose esters membrane for microbiological analysis meets or surpasses regulatory specifications.

Supplier: Lovibond Tintometer

Lovibond®, Filter set red, yellow, neutral, with 10 filters

Supplier: Lenz Laborglas GmbH & CO.KG

These cylindrical filter plugs without tube are made of borosilicate glass 3,3.

Supplier: Cytiva (Formerly Pall Lab)

Scalable capsules with PP housing and vent and Seitz® high performance depth filter media. Supracap™ 50 capsules are designed for developing and optimising a process during scale-up and scale-down studies. They can be used to quickly and accurately determine which series and grade of depth filter media will provide the best performance as well as the necessary filtration area required to meet process volume.

Supplier: AAT Bioquest

ReadiUse™ 10 Kd spin filter is a disposable ultrafiltration device for the concentration of biological samples such as antibodies.

Supplier: Merck

Fluid Contamination Analysis Monitors are transparent, disposable filter holders made from Tenite® plastic and pre-assembled with MF-Millipore filters (effective filtration area is 9 cm²).