42 Results for: "VACUUBRAND"

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life; diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life; diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

These small flanges made of stainless steel.

Supplier: VACUUBRAND

Chemistry diaphragm pumps: Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Supplier: VACUUBRAND

Rubber.

Supplier: VACUUBRAND

These flanges are made from aluminium or plastic.

Supplier: VACUUBRAND

Separator inlet side, AK R 2/2,5, For: RE 2, RZ 2, RE 2,5, RZ 2,5

Supplier: VACUUBRAND

Chemistry hybrid pump, RC 6

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

Model CVC 3000: Fully electronic, highly versatile vacuum gauge and controller. The controller is equipped with a built-in capacitive absolute-pressure transducer made from alumina/ceramic as well as a built-in venting valve and switched outlets for a suction line valve and a coolant water valve. It eases work considerably and enables environmentally friendly operation whilst protecting samples, solvent recovery, reduced foam formation and superheating. The optimum vacuum setting can be found quickly and simply, even with unknown mixtures and pressures.

Supplier: VACUUBRAND

The VP 2 Autovac chemistry pumping unit, with vacuum controller, meets the demands of modern rotary evaporation. The hysteresis-free vacuum control prevents boiling retardation and foaming, therefore, ensuring consistently high process safety and an exceptionally high performance, even at low vacuum. This control enables detection of vapour pressure and fully automatic adjustment of the vacuum level to the process requirements without any user programming or intervention.

Supplier: VACUUBRAND

For securing and mechanical pressing of O-ring seals. Aluminium or stainless steel, non rusting.

Supplier: VACUUBRAND

Centering with external centering rings is effected on the external diameter of the small flange, the O-ring seal is pressed into an internal radius.

Supplier: VACUUBRAND

Rotary vane pump oil, B
Rotary vane pump oil, B has excellent viscosity characteristics and low vapour pressure. Its exceptional chemical resistance, more stable behaviour when pumping oxidants, acid and alkaline vapours, and the fact that it is better tolerated on contact with skin, sets this oil apart from conventional mineral oils. Even after continuous operation for several weeks and months, the oil ensures the pressure is maintained constantly. Used for priming all RE/RZ series pumps.

Supplier: VACUUBRAND

These mechanical diaphragm pumps function without oil. They are easy to operate, use no water and generate neither wastewater nor used oil. These pumps are used for evacuating or pumping gases between containers in chemistry or physics laboratories and are extremely versatile.

Supplier: VACUUBRAND

Vacuum diaphragm pump, PC-software Vacuu-Control

Supplier: VACUUBRAND

Reducing pieces with small flanges KF made of aluminium or stainless steel.

Supplier: VACUUBRAND

Stainless steel, with FPM O-ring seal.

Supplier: VACUUBRAND

T-pieces with small flanges KF made of aluminium or stainless steel.

Supplier: VACUUBRAND

The VACUU.LAN local vacuum network connects several workstations to one vacuum pump. The various modules make it possible to connect almost all popular vacuum applications such as rotary evaporators, vacuum concentrators, gel dryers, drying ovens and filter systems. It can be integrated into new laboratory furniture at the time of assembly or subsequently installed in existing laboratories.

Supplier: VACUUBRAND

VV-B 6 suction line valve, VACUU BUS, FPM/PP, electromagnetic, DN 16

Supplier: VACUUBRAND

Vacuum pump units with a two or three-stage chemistry diaphragm pump. Compact construction with chemistry diaphragm pump on base plate, separator on suction side made of glass with protective coating (AK), one or two electromagnetic chemistry valves on the suction line, exhaust waste vapour condenser with collecting flask, and one or two CVC 3000 vacuum controllers on the controller support.

Supplier: VACUUBRAND

Vacuum pump units with a two- or three-stage chemistry diaphragm pump. Compact construction with chemistry diaphragm pump on base plate, separator on suction side made of glass with protective coating (AK), one or two electromagnetic chemistry valves on the suction line, exhaust waste vapour condenser with collecting flask, and one or two CVC 3000 vacuum controllers on the controller support.

Supplier: VACUUBRAND

Maintenance kit, RC 6

Supplier: VACUUBRAND

This VARIO® chemistry pumping unit optimizes vacuum conditions automatically by precisely and continuously adjusting the diaphragm pump´s motor speed. Thanks to the motor speed control the pump operates only when vacuum is needed, saving energy and reducing maintenance.

Supplier: VACUUBRAND

Stainless steel.

Supplier: VACUUBRAND

Retrofit kit module AK/EK for MZ 2C

Supplier: VACUUBRAND

PVC.

Supplier: VACUUBRAND

Blind small flanges KF made of aluminium or stainless steel.

Supplier: VACUUBRAND

One- and two-stage rotary vane pumps with built-in oil pump and powerful gas ballast device for outstanding water vapour tolerance. Pumps are powerful yet compact and lightweight.