478 Results for: "UPCHURCH SCIENTIFIC"

Supplier: UPCHURCH SCIENTIFIC

These standard inline check valves are made from gold plated stainless steel.

Supplier: UPCHURCH SCIENTIFIC

Note: Do not use metal fittings in plastic ports, as this can damage the port.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, A-418 frit, Porosity: 0,5 µm, Thickness: 1,57 mm, Frit Ø ext.: 1,6 mm, Frit volume: 0,6 µl, Frit material: Stainless steel, Ring ext. Ø: 5,08 mm, Ring material: PCTFE

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

Stainless steel, PEEK or UHMWPE

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-136, flangeless fittings includes nut, PEEK natural and washer, ETFE blue, 5/16-24 flat bottom port, 2000 psi, for 1/16" OD tubing, ETFE

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or stainless steel. They create a true zero dead volume (ZDV) connection between ¹/₁₆" ext. Ø tubing and capillary tubing.

Supplier: UPCHURCH SCIENTIFIC

PEEK or FEP.

Supplier: UPCHURCH SCIENTIFIC

Designed to cut polymer tubing ¹/₁₆" and ¹/₈" O.D.

Supplier: UPCHURCH SCIENTIFIC

Use this tubing expanding awl when working with barbed fittings. Sometimes the tubing can be too tight to fit over the barb properly. This awl can also be used with semi-rigid tubing, for those rare applications where this tubing needs to be paired with a barbed fitting. By expanding the int.Ø of the tubing, it will make it an easier process to insert the barbed fitting into place.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, VHP torque wrench, Tightening torque: 1,13 N-m, Use with head style: 1/4" hex

Supplier: UPCHURCH SCIENTIFIC

Stainless steel tubing.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-756, cap for M6 flat bottom ports, standard knurl, ETFE, Blue

Supplier: UPCHURCH SCIENTIFIC

The 6-way medium pressure selection valves have a common inlet (or outlet) port connected to six different ports. If the application does not require all six outer ports, seal the extra port(s) with any flat-bottom ¹/₄ - 28 plug.

Supplier: UPCHURCH SCIENTIFIC

These fittings eliminate loosening due to tubing twist.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® MicroTight®, F-126S, fitting, standard micro knurl, PEEK red, 6-32 coned port, for 1/32" OD tubing, 5000 psi, PEEK

Supplier: UPCHURCH SCIENTIFIC

PFA tubing, standard.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, Replacement blades for standard polymer tubing cutter

Supplier: UPCHURCH SCIENTIFIC

For fine control of fluid flow rates, these valves can reduce outgoing flow. These needle valves are perfect for use with peristaltic pump fluid transfer applications, mass spectrometry and fraction collection. They can also be used to regulate gas flow in helium sparging lines and as a flow-dependent variable back pressure regulator.

Supplier: UPCHURCH SCIENTIFIC

These PEEK sample loops are metal-free alternatives to stainless steel loops. PEEK loop ends are provided with clean, straight cuts for easy valve installation.

Supplier: UPCHURCH SCIENTIFIC

Made of stainless steel or PEEK.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

These filters are designed to seal and filter simultaneously by incorporating a frit into the body of a flat-bottom ferrule.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® LiteTouch®, LT-100x, ferrule, PEEK natural/stainless steel, 10-32 coned port, for 1/16" OD tubing, 5000 psi

Supplier: UPCHURCH SCIENTIFIC

Semi-prep inline filters
- Designed for high flow applications
- Flow rates up to 100 ml/min
- Pressure rated to 7500 psi (517 bar)

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, A-337 semi-prep frit, Porosity: 20,0 µm, Thickness: 1,6 mm, Frit Ø ext.: 19,1 mm, Frit volume: 152 µl, Frit material: Stainless steel, Ring ext. Ø: 22,4 mm, Ring material: ETFE

Supplier: UPCHURCH SCIENTIFIC

Several nut lengths and head styles to fit into a variety of applications, designed to connect ¹/₁₆" OD tubing to 10-32 coned ports, hold up to 9000 psi (620 bar).

Supplier: UPCHURCH SCIENTIFIC

These ultra-low volume back pressure regulators (BPRs) are developed to minimise swept volume, which is especially important for multi-detector applications.

Supplier: UPCHURCH SCIENTIFIC

Inline filters consist of a stainless steel body and two PEEK end fittings.