Supplier: UPCHURCH SCIENTIFIC

These tools made from aluminium or Delrin® can be used to tighten most knurled nuts in hard to reach places. For precise tightening, the extender tools listed with ¼" hex drives are designed to adapt to any torque wrench with a female ¼" socket.

Supplier: UPCHURCH SCIENTIFIC

These standard size wrenches can be used to tighten most nuts into unions.

Supplier: VWR Collection

Stainless steel. These multi-purpose clamps are ideal for holding large cylindrical glassware and similar objects. A large, flat thumbscrew/worm drive permits maximum tightening or removing in minimum time.

Supplier: Bohlender

Valve made from PPS with flow body made from PTFE. Can be used as a pressure relief valve with adjustable control of pressure or as a valve to prevent a fall in pressure during the filling process. Flow body with 2 GL 18 threaded connectors and valve with toggle for manual venting by tightening, set screw and lock nut to adjust and fix the application pressure in the range from 0,1 to 10 bar (factory setting 1,5 bar).

Supplier: MACHEREY-NAGEL

Accessories for stainless steel columns, PEEK fittings and capillaries.

Supplier: MACHEREY-NAGEL

CC connecting kit, with 2 nuts of end fittings, two sleeves and two guide rings

Supplier: Trajan Scientific and Medical

Nut, 1/8" hole, stainless steel, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: Trajan Scientific and Medical

Designed to be installed only with the force of your fingers delivering an easy, leak-free installation for capillary columns without the use of any tools. Developed with the unique, leak- and air-free properties of SilTite™ ferrules, which results in superior air tightness to reduce background noise in sensitive MS applications.

Supplier: Trajan Scientific and Medical

Autosampler syringes for AOC14, AOC17 and AOC20.

Supplier: Avantor

The female-female connector consists of stainless steel tubing (40 mm×1,588×0,254 mm (L×O.Ø×I.Ø)) with appropriate 1/16" nuts and ferrules and can be used to connect female endfitting guard and analytical columns and make similar connections.

Supplier: Trajan Scientific and Medical

Autosampler syringes for PerkinElmer AutoSystem.

Supplier: VWR Collection

Multiple rod connector holds lab-frame rods or extension clamps at 90° while allowing both horizontal and vertical adjustment of lattice after construction. Two adjacent rods fit into oval hole in connector that prevent turning when tightened.

Supplier: Bohlender

Fittings made of PTFE to fix tubing in the tubing connectors (thread NPT ¹/₈") of b.safe caps. The conical seal cone clamps the tubing and tightens at the connector. Packing unit: 1 piece.

Supplier: Avantor Fluid Handling

Remove or tighten plugs on most industrial drums.

Supplier: MACHEREY-NAGEL

The Column Protection System guard column holder is used for the installation of NUCLEODUR®, NUCLEOSIL®, NUCLEOSHELL® or UNIVERSAL RP guard columns (EC system) at analytical HPLC columns with ¹/₁₆" fittings.

Supplier: Trajan Scientific and Medical

Autosampler syringes for HP7673, 7683, 7693A and 6850ALS.

Supplier: VWR Collection

A selection of tools to assist in opening IBCs, 200 litre drums, plus bottles and other containers with DIN 32, 45, 54 and 80 caps.

Supplier: Trajan Scientific and Medical

* Gas-tight.

Supplier: Trajan Scientific and Medical

SilFlow™ microchannel device (MCD) options for three-port GC splitters, four-port GC splitters and a Deans' switch MCD, perfect for multi-dimensional analyses. SilFlow™ can be incorporated into the system without impacting the chromatography.

Supplier: Trajan Scientific and Medical

* Gas-tight.

Supplier: Bohlender

These glass fibre reinforced PA fork wrenches can be used for tightening or opening screw joints also at high working temperatures.

Supplier: MACHEREY-NAGEL

The high purity CHROMABOND® adsorbents can be used for a self-filling of SPE columns or further analytical applications.

Supplier: VWR Collection

Hold a variety of apparatus, including glass tubes and thermometers, on glass water bath walls of varying thickness up to 9 mm (¹¹/₃₂"). Knurled thumbscrew tightens jaws to hold object firmly.

Supplier: Avantor

Column type: GC column, Avantor® Hichrom, GC column, Fused silica, Ø int.: 0,18 mm, Length: 40 m, Film thickness: 0,40 µm

Supplier: Avantor

Column type: GC column, Avantor® Hichrom, GC column, Fused silica, Ø int.: 0,32 mm, Length: 50 m, Film thickness: 0,50 µm

Supplier: Avantor

Application specific column for blood alcohols testing.

Supplier: Avantor

Application specific column for basic compouns (e.g. amines).

Supplier: Avantor

Application specifc column for direct introduction of aqueous samples, thus minimizing sample preparation.

Supplier: Avantor

High Temperature general purpose column for high boiling petroleum products, Long-chained hydrocarbons.