63 Results for: "Purge "

Supplier: VWR Chemicals

Methanol ≥99.9%, PESTINORM® for purge and trap GC analysis

Supplier: Avantor

Methanol ≥99.9%, ULTRA RESI-ANALYZED® for gas chromatography, for purge and trap GC analysis, J.T.Baker®

Supplier: BURDICK JACKSON

Methanol ≥99.9%, B&J Brand™ for purge and trap GC analysis, for determination volatile organic compounds, Burdick & Jackson™

Supplier: Avantor Fluid Handling

Optimize performance of your Liquid-Solids Separator.

Supplier: BUCHI

Single 4-way injection/purge device

Supplier: MEMMERT

Vacuum pump with 4× chemical resistant diaphram, approx 50 Nl/min (3,0 m/h³) with automatic purge control. Requires vacuum connection hose and signal cable, For: VO29

Supplier: VACUUBRAND

Chemistry diaphragm pumps: Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Supplier: LABCONCO

Automatic pressure controller for 230 V units, incl. mounting bracket, hardware, 3/16" ID polyvinyl tubing, 3/32" ID polyvinyl tubing, and power cord, for automatic control of the main chamber pressure, main chamber purging and filling cycles, and transfer chamber evacuation and filling cycles

Supplier: S.C.A.T.

This purging manifold alows you to install up to four SafetyCaps on your purging bottle.

Supplier: DWK Life Sciences

HPLC 1000 ml purging bottle with five GL 45 inlets.

Supplier: VITLAB

This pipette controller holds pipettes from 0,1 to 200 ml securely and tightly in the exchangeable adapter. Liquid vapours are purged directly to protect the instrument.

Supplier: BURKLE

Peleus ball, simple pipetting aid. Evacuation takes place via an automatic valve. By pressing the valves, the liquid is drawn up, dispensed or purged.

Supplier: MACHEREY-NAGEL

This test paper allows the easy detection of arsine (AsH₃) in the gas phase. Arsenic in solutions has to be converted into AsH₃ with Zn/acid and purged from the solution. The Arsine is detected directly at the boundary layer between water and air.

Supplier: VWR Collection

VWR® Gas venting filters are designed for obstructing bacterial, particles or moisture when venting in different applications. Sterile venting of bioreactors, fermentation tanks, media flasks, and carboys. Sterile gas purge of cell culture vessels or filling vessels. In-line sterilisation of and particulate removal from air and gases. Obstruct moisture to protect equipment.

Supplier: Lenz Laborglas GmbH & CO.KG

DURAN®, borosilicate glass 3.3, clear.

Supplier: Lenz Laborglas GmbH & CO.KG

Duran® clear borosilicate glass.

Supplier: Lenz Laborglas GmbH & CO.KG

Duran® borosilicate glass.

Supplier: BUCHI

4 Way Injection/Purge Device 1 * 1 items

Supplier: BURKLE

Solid sampler, Quali-Paper for emptying collected samples, 890×230 mm

Supplier: MARKET SOURCE PART PROCESS

NH3 MFC PURGE MANIFOLD 1 * 1 items

Supplier: Lenz Laborglas GmbH & CO.KG

Duran® borosilicate 3.3 clear glass.

Supplier: NABERTHERM

Vent with catalytic converter (not suitable for use with L(T) 9/14, L(T) 15, L 1/12, LE 1/11 and LE 2/11 models), Nabertherm

Supplier: Lenz Laborglas GmbH & CO.KG

Duran®, borosilicate glass, clear. Both ends with a 3 NS/14 one-way stop cock. Sampling tube with GL 14 thread.

Supplier: BURKLE

The telescopic immersion tube adapts itself to the container height on insertion of the foot pump. This ensures good removal of residual liquid and means that the foot pump can be used with different containers.

Supplier: BURKLE

The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid and means that the hand pump can be used with different containers.

Supplier: Thermo Fisher Scientific

These vent filters with hydrophobic PTFE membrane and PP housing are designed to maintain purified water stored in carboys. They can also be used for venting and solvent filtration applications.

Supplier: Avantor Fluid Handling

No worrying about reliability—longest life available.

Supplier: DWK Life Sciences

This bromobutyl rubber closure provides a gas-tight seal for all GL 25 and GL 45 laboratory bottles with sizes from 10 to 20000 ml.

Supplier: Avantor

The cycle-tap dispenser is a stainless steel solvent dispense unit with a hose designed for unmetered manual dispensing of solvent.

Supplier: Avantor Fluid Handling

Compact, cost effective pump systems for general fluid transfer applications.