1124 Results for: "Binder"
Drying ovens with forced convection, FD series
Supplier: Binder
Universal drying ovens with stainless steel chambers which are ideal for use in the pharmaceutical and chemical industries, biotechnology, medicine and universities. Ovens feature one temperature program ramp, an adjustable TWB class 2 safety device with visual alarm and adjustable ventilation by means of ventilation slide and 50 mm Ø exhaust duct. Fast recovery times after opening the door or air change.
Expand 2 Items
Accessories for Binder incubators
Supplier: Binder
Environmental test chamber
Expand 7 Items
Accessories for CO₂ incubators with hot air sterilisation CB series
Supplier: Binder
CO₂ Incubator
Expand 7 Items
Accessories for ultra-low temperature freezers, UF V 500
Supplier: Binder
Calibration certificate, temperature - for temperature, measurement in center of chamber at specified temperature, For: UF V
Expand 14 Items
Extended warranty for Binder KT refrigerated incubators
Supplier: Binder
Extended warranty for Binder KT refrigerated incubators
Expand 1 Items
Drying ovens with forced convection FED series, Avantgarde.Line
Supplier: Binder
With forced convection and enhanced timer functions, the Avantgarde.Line heating and drying chambers offer quality and process reliability. With a wide temperature range up to 300 °C, these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ preheating chamber technology gives homegeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.
Expand 3 Items
Refrigerated incubators with Peltier technology, forced convection, KT series
Supplier: Binder
These energy efficient cooled incubators have been designed for use in the temperature range from 4 to 100 °C. They feature a Peltier cooling system for finely controlled cooling down to 4 °C together with powerful conventional heating. The unit has easy to clean stainless steel interior and inner safety glass door. The incubators are ideal for use in microbiology, genetics, zoology, food and beverage industries, medicine, forensics, pharmaceutical and cosmetic industries. USB port for reading data and ethernet interface for communication software APT-COM™ DataControlSystem.
Expand 3 Items
Drying ovens with natural convection ED series, Avantgarde.Line
Supplier: Binder
With natural convection, Avantgarde.Line heating and drying chambers offer quality and process reliability. With a wide temperature range up to 300 °C, these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. APT.line™ pre-heating chamber technology gives homegeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. These units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.
Expand 3 Items
Incubators with natural convection (BD) or forced convection (BF), Avantgarde.Line
Supplier: Binder
Avantgarde. Line incubators ensure stable and reliable incubation of microbiological cultures and guarantee reproducible results for routine tests in the laboratory – even high batch throughputs and with long-term operation. Avantgarde. Line BD models have natural convection ensuring rapid temperature equalisation after the door is opened. The BF models have forced convection via a fan. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution, excellent temperature uniformity and low fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.
Expand 6 Items
Ovens, E 28
Supplier: Binder
Robust space-saving oven/steriliser with hydraulic mechanical thermostat and temperature setting via analogue dial indicator thermometer.
Expand 2 Items
Plant growth chambers, KBWF Series
Supplier: Binder
The KBWF series plant growth chambers are precise units for plant cultivation under the most up-to-date working conditions with optimum climatic conditions. They provide perfect simulation of a wide range of growing environments, the perfect interaction between heat or cold, humidity and light. The design includes variable position daylight cassettes with five daylight luminescence tubes each. Units self-test for comprehensive status analysis.
Expand 2 Items
Accessories for drying ovens, ED series
Supplier: Binder
Alarm function for overheating, 120/208 V, For: ED 400
Expand 1 Items
Accessories for dynamic climate chambers MKF series
Supplier: Binder
Switching output potential-free, RS 485 / RS 422 interface converter with 230 V option model
Expand 2 Items
Climatic chambers, KBF, KBF P and KBF LQC series
Supplier: Binder
The KBF series is ideal for reliable stability tests and precise maintenance of constant climatic conditions. Constant temperature and humidity values are the outstanding features of this range. These constant climate chambers have a large reserve capacity and a variety of optional features. They also comply with all applicable guidelines with respect to programs and documentation requirements, such as ICH, FDA, GMP and GLP. Units can be operated with tap water with BINDER PURE AQUA SERVICE, a flexible water purification system (optional) or demineralised, deionised, distilled, ultra pure water.
Expand 4 Items
Accessories for drying ovens with natural convection ED series, Avantgarde.Line
Supplier: Binder
Access port with silicone plug, top, 100 mm, For: ED 56/115/260/720
Expand 9 Items
Additional shelves for FD Range Ovens
Supplier: Binder
Shelves, Stainless steel shelf, For: BF/FD/FED 260
Expand 2 Items
Vacuum ovens, VD and VDL series
Supplier: Binder
Vacuum drying ovens with stainless steel inner chambers. All units have a microprocessor controller with two programs, 10 sections each or, alternatively, one program with 20 sections. The time interval of a single program section can be adjusted up to a maximum of 99,59 or 999,59 hours on all program sections. Units have an adjustable TWB Class 2 safety device with visual alarm. GLP/GMP compliance is assisted by the integral RS422 interface and optional APT-COM™ DataControlSystem software.
Expand 3 Items
Accessories for Incubators
Supplier: Binder
RS422/RS232 interface converter
Expand 4 Items
Accessories for environmental test chambers, MKT range
Supplier: Binder
Reinforced stainless steel rack, with fasteners (1 set of 4), For: MK/MKF/MKT/MKFT 720
Expand 4 Items
Refrigerated incubators, KB series
Supplier: Binder
The KB series with compressor cooling consumes up to 30% less energy compared to its predecessor. Refrigerated incubators are mainly used for culturing tasks that need to be carried out at temperatures below room temperature or if high ambient temperatures cannot be avoided. The cooling system and the controllable fan guarantee high degrees of humidity even during cooling mode, or prolonged testing, to protect samples from drying out even when fully loaded.
Expand 6 Items
Climatic chambers with extended temperature and humidity range, KMF series
Supplier: Binder
KMF constant climate chambers ensure constant test conditions throughout the stainless steel chamber even with a full load and only require a small amount of bench space. Units can be operated with Binder Pure Aqua Service, a flexible water purification system (optional) or deionised water. Units self-test for comprehensive status analysis.
Expand 3 Items
Drying ovens with forced convection, FD series, Avantgarde.Line
Supplier: Binder
With forced convection, the Avantgarde.Line heating and drying chambers offer quality and process reliability. The wide temperature range of up to 300 °C, mean these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.
Expand 3 Items
Accessories for refrigerated incubators with Peltier technology, KT series
Supplier: Binder
Cooled Incubator
Expand 12 Items
Accessories for constant climate chambers KMF series
Supplier: Binder
Stainless steel perforated shelf, KBF 1020
Expand 26 Items
Climatic chambers, KBF series
Supplier: Binder
The KBF series is ideal for reliable stability tests and precise maintenance of constant climatic conditions. Constant temperature and humidity values are the outstanding features of this range. These constant climate chambers with stainless steel interior have a large reserve capacity and a variety of optional features. They also comply with all applicable guidelines with respect to programs and documentation requirements, such as ICH, FDA, GMP and GLP. Units can be operated with Binder Pure Aqua Service, a flexible water purification system (optional) or deionised water.
Expand 4 Items
Accessories for drying ovens with forced convection, FD series, Avantgarde.Line
Supplier: Binder
Heating output reinforced, 120/230 V, For: FD 115
Expand 2 Items
Accessories for environmental test chambers, MKF series
Supplier: Binder
Environmental test chamber
Expand 3 Items
Constant climatic chambers, with ICH-compliant light source, KBF P and light dose control, KBF LQC series
Supplier: Binder
The KBF P constant climatic chambers with ICH-compliant UV/Vis light source and KBF LQC with light dose control have a unique light concept that guarantees homogeneous light distribution. The illumination cassettes can be positioned variably and even removed. The units have a stainless steel inner chamber, an automated water and waste water management system, and an access port with silicone plug Ø 30 mm on the left hand side. Units self-test for comprehensive status analysis.
Expand 4 Items
Cartridge for deioniser, Pure Aqua Service
Supplier: Binder
Filter cartridge, Type: Replacement cartridge