3143 Results for: "Barium+silicon+oxide&amp"

Supplier: MP Biomedicals

Liqui-Gel™ 37:5:1 is a solution prepared from electrophoresis grade acrylamide and bis-acrylamide in ultra-pure water.

Supplier: Thermo Fisher Scientific

Most Nalgene® closures and those of other manufacturers can be retrofitted with these connectors for liquid transfer without a ventilation and venting device. To do this, simply drill two fitting holes in the closure, feed in the insert and tube connectors and attach tubes with 6 or 13 mm internal diameter. Nalgene® closures 53B (53 mm) can only be fitted with the 6 mm tube connectors, the 83B (83 mm) closures can be equipped with both 6 and 13 mm connectors.

Supplier: Thermo Fisher Scientific

Manganese(II) acetate tetrahydrate (∼22% Mn)

Supplier: LABCONCO

230 V Power Cord with Plug, British (UK) 1 * 1 items

Supplier: KIMBERLY CLARK

These anti-static lab coats are constructed of multiple layers, with a chemical and abrasion resistant spunbond 100% PP outer layer, and microfibre, cloth-like inner layer designed to filter out a variety of water-based liquids and dry particulates.

Supplier: DWK Life Sciences

The four-port connector cap is manufactured using three-dimensional metal printing. This method allows the complex form to be optimised using computer aided design software, as well as significantly reducing the amount of metal required for construction. The transfer connection cap can be used with all sizes of DURAN® GL 45 bottles, and facilitates the movement of liquids within a closed and aseptic system.

Supplier: Ansell

Microflex® 93-360 is a thin, chemical resistant disposable glove designed for cleanroom environments. It is made of an innovate, synthetic composite material (nitrile/neoprene) for tough chemical protection.

Supplier: ERGOMAT

The anti-static Ergomat® AFS Complete is made of pure polyurethane and is designed to increase comfort while reducing trip hazards and body pain. This mat is for all dry and damp areas where flame retardant and anti-static material is important. Great chemical resistancy for where chemical or oil spillage may occur. The smooth version is ideal for areas where trolleys and carts are used.

Supplier: Saint Gobain Life Sciences

Made from 2 mil thick PVF fluoropolymer film. When the chemical inertness of FEP is not required, Chemware® heat-sealed, PVF gas sampling bags are the ideal choice. These reusable bags are the perfect economical alternative for analysis of non-corrosive gases. Can be used when the user is dealing with carbon monoxide, sulphur dioxide, hydrogen sulfide, radon and mercaptans. Ideal for extracting air samples from smoke stack exhaust systems in fuel gas sampling applications.

Supplier: HIRSCHMANN

Safe and reliable, these bottle-top dispensers and titrators provide extremely sensitive, motor-powered dispensing precision. These devices operate with remote touch screen controllers that give complete control over all functions.

Supplier: Thermo Fisher Scientific

Chloramine-T (sodium salt) trihydrate 98.0-103.0% ACS

Supplier: VWR Collection

Pocket-size thermometer features handy cable storage and probe brackets for portability.

Supplier: Avantor Fluid Handling

Sanitary fitting with built-in gasket makes sanitary installation easier than ever.

Supplier: MP Biomedicals

Phenazine methosulfate is an electron acceptor and carrier in enzyme systems. The oxidised form is yellow and the reduced form is colourless.

Supplier: Avantor Fluid Handling

Long pump life and chemically compatible to a wide range of chemicals.

Supplier: CLEAVER SCIENTIFIC

The omniPAGE mini electroblotting system allows PAGE and blotting to be performed using the same universal tank and lid. Interchangeable modules dedicated to PAGE or blotting facilitate simultaneous transfer of up to four 10×10 cm gels.

Supplier: Ansell

The HyFlex® 11-751 glove features a 10G lightweight, medium-duty liner with INTERCEPT TECHNOLOGY® yarns that provide EN ISO Cut Level C protection for high levels of cut resistance.

Supplier: MP Biomedicals

N-Acetyl-L-cysteine is an acetylated amino acid with antioxidant and mucolytic properties, as a mucolytic, N-Acetyl-L-cysteine serves to dissipate disulphide bonds across mucoproteins, loosening and clearing the viscosity of sputum. It increases cellular pools of free radical scavengers.

Supplier: MACHEREY-NAGEL

These snap ring vials with quick, convenient sealing method can be used on all common HPLC autosamplers.

Supplier: KIMBERLY CLARK

These gloves are manufactured from nitrile instead of rubber latex, which reduces the likelihood of TYPE I glove-associated reactions.

Supplier: DuPont

Specially designed for use with Tyvek® apparel, this hood can help offer enhanced protection for body parts that are more exposed to hazardous substances. The hood is made of Tyvek® which is composed of flash spun high density polyethylene. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size).

Supplier: Ansell

This Kevlar®/stainless steel/Spandex glove with foam nitrile palm coating combines high visibility with superior cut resistance and durability.

Supplier: Ansell

These seamless knitted gloves are made from high performance and high visibility fibres, using Intercept™ technology. They feature a ³/₄ dipped water-based PU/nitrile coating or a palm coating.

Supplier: Nitritex

Providing high particle and bacterial filtration efficiency, the latex-free and low-linting BioClean MTA™ sterile looped facemask ensures protection, combined with comfort and exceptional breathability.

Supplier: Ansell

Breathable, anti-static SMS material offering Type 5/6 protection.

Supplier: ADELPHI MANUFACTURING

Hygienic electronic liquid filling machine, ideal for laboratories, research facilities and SME-scale pharmaceutical manufacturing. Time-efficient, with fast changeover to fill many different products and containers. Space-efficient, for improved productivity. Exceptionally hygienic; international pharma-quality compliant.

Supplier: Ansell

Superior breathable microporous laminate technology, offering Type 5/6 protection.

Supplier: Ansell

These nitrile gloves resist a variety of industrial chemicals for longer periods than other nitrile disposable gloves. They also offer high tensile strength and 3 times the puncture resistance of latex or PVC gloves.

Supplier: Thermo Fisher Scientific

Dihydrogen hexachloroplatinate(IV) hexahydrate is used for the determination of potassium. It is also used for the purification of platinum by treating it with ammonium chloride flowed by heating of ammonium hexachloroplatinate with hydrogen yields elemental platinum. It also finds application in catalysis, electroplating, photography, platinum mirrors, printing for etching of zinc, producing fine color in glass and porcelain, indelible ink and microscopy. It is a precursor for the preparation of other platinum catalysts.

Supplier: Ansell

These disposable heavyweight gloves feature a three layer design for superior protection against harsh chemicals including acids, solvents and bases.