3434 Results for: "1-Butyl-2,3-dimethylimidazolium+hexafluorophosphate"

Supplier: Honeywell Chemicals

Coulometric Karl Fischer titrations normally require two reagent solutions: an anolyte (the solution in the anodic compartment) and a catholyte (the solution in the cathodic compartment).

Supplier: Brand

Fixed volume or variable volume, analogue-adjustable or digital easy calibration.

Supplier: MACHEREY-NAGEL

NUCLEODUR® Sphinx RP is a bifunctional RP phase with a balanced ratio of propylphenyl and C18 ligands, using in HPLC.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C18 ec is a medium density monomeric octadecyl modified silica phase for HPLC.

Supplier: VWR Collection

Rugged, economical, balances that are ideal for educational establishments and laboratory use. A series that ranges from simple weighing to operation with automated internal calibration and with GLP date/time functionality. All models have a stainless steel top pan.

Supplier: Thermo Fisher Scientific

These cryogenic vials have the same features as the standard cryotubes. They are designed for long term low temperature storage. Some vials have laser etched unique 2D barcodes that allow for tracking of the samples. The codes are permanently attached so they do not separate from the vials. Barcoded vials feature standard microplate format racks.

Supplier: MP Biomedicals

Tetracycline is a broad spectrum polyketide antibiotic with clinical uses in treating bacterial infections such as Rocky Mountain spotted fever, typush fever, tick fevers, Q fever, and Brill-Zinsser disease and to treat upper respiratory infections and acne. It has been used in studies of multidrug resistance and potential side effects including acute pancreatitis.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C18 Gravity is an octadecyl modified silica phase with a high density coverage, using for HPLC.

Supplier: MACHEREY-NAGEL

NUCLEODUR® C18 Pyramid is an octadecyl modified silica phase with polar endcapping, especially designed for use in eluent systems of up to 100% water.

Supplier: VWR Collection

VWR® Incubating Microplate Shakers feature variable-speed, microprocessor control, providing reliable, uniform mixing action with accurate temperature control you can trust and are ideal for cell cultures, immunoassays, hybridisation, genetics research and bacterial suspensions.

Supplier: SCIENTIFIC INDUSTRIES ELMIS

* Multiple sample starter set consists of a 152 mm platform, a foam insert for 60 microtubes and a foam insert for one standard microplate
** Large sample set is ideal for mixing beakers, flasks and large tubes. The set consists of a recessed platform, two elastic bands, a blank foam insert, a foam insert for 4×29 to 37 mm tubes, a foam insert for 8×14 to 29 mm tubes and a foam insert for 12×9 to 16 mm tubes
*** Small ampoule/tube attachment enables vigorous end-to-end mixing for up to four 15 to 17 mm Ø tubes or ampoules
**** Large ampoule/tube attachment enables vigorous end-to-end mixing for up to four 10 to 17 mm Ø tubes or ampoules.

Supplier: Edmund Bühler GmbH

Durable orbital shakers, with digital control, available as standard or battery operated versions. The Akku model’s battery gives runtime of at least 40 hours. Different vessels can be accommodated by choosing from the range of optional attachments available.

Supplier: Edmund Bühler GmbH

Bench top reciprocating shakers which are suitable for continuous operation and accommodate loads of up to 30 kg. Universal tray accepts max. 11×1000 or 15×500 ml flask clamps; Combifix rack system accommodates 6×1000 or 12×500 ml Erlenmeyer flasks. Variety of different vessels can be accommodated by choosing from the range of optional attachments.

Supplier: VWR Collection

These anti-static coats are manufactured from 99% polyester fibres with 1% Hydro-Tec finish (carbon treated), which makes them both extremely durable and excellent for repelling dirt, oil, chemicals and water. All coats feature a stand-up collar, two side pockets and one breast pocket, all three protected by a flap.

Supplier: VWR Collection

VWR® Incubating mini shakers feature variable-speed, microprocessor control, providing reliable, uniform mixing action with accurate temperature control. Ideal for cell cultures, solubility studies, extraction procedures, diagnostic tests, general mixing, hybridisation, genetics research, bacterial suspensions, staining/destaining and washing procedures.

Supplier: MACHEREY-NAGEL

These wet strengthened hard smooth filter papers are made of refined pulp and linters and have a low ash content. They are often used for quantitative routine procedures and for analytical gravimetric applications.

Supplier: MP Biomedicals

Urea is the principal end product of nitrogen metabolism in most mammals, formed by the enzymatic reactions of the Kreb's cycle.

Supplier: VWR Collection

VWR® Rigid PCR Plates feature a rugged polycarbonate frame, providing a solid and flat surface that guarantees seamless interaction with automated liquid handling platforms. With a firm grip assured, robots can confidently place VWR® Rigid PCR Plates with utmost precision, eliminating any concerns of misalignment.

Supplier: VWR Collection

VWR® mini shakers feature variable-speed, microprocessor control, providing reliable, uniform mixing action. Ideal for cell cultures, solubility studies, extraction procedures, diagnostic tests, general mixing, hybridisation, genetics research, bacterial suspensions, staining/destaining, and washing procedures.

Supplier: Avantor Fluid Handling

Stores calibration data for up to 10 gases.

Supplier: LABCONCO

CentriVap® vacuum concentrators are available in a range of configurations. The CentriVap® DNA model is supplied with a built-in 34 litres/min diaphragm pump, two 177 ml glass traps and a DNA rotor (60×1,5/2,0 and 72×0,5 ml). Model with glass lid is recommended for evaporation of solvents that are not compatible with acrylic (acetone, acetonitrile, ethanol, DMSO, etc.). The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, etc.).

Supplier: EPPENDORF

Eppendorf's twin.tec® 96-well, 150 µl PCR Plates feature a polycarbonate frame and thin-walled polypropylene wells ensuring optimal heat transfer and high rigidity. The SafeCode variants enhance sample identification, while the BioBased options, manufactured using renewable resources, provide an eco-friendly alternative without compromising performance.

Supplier: MP Biomedicals

Storage: Store at Room Temperature (15-30 °C). Protect from light.
Folic acid, also known as folate, is a B vitamin that can be found in a variety of fruits and vegetables. It can also be chemically synthesized. Folate, a watersoluble vitamin, helps the body form red blood cells and aids in the formation of genetic material within every body cell. Folic Acid is a hematopoietic vitamin present, free or combined with one or more additional molecules of L- (+)-glutamic acid, in liver, kidney, mushrooms, spinach, yeast, green leaves, and grasses.
A nutritional delivery form of folate. Folic acid and its derivatives are essential mediators of one-carbon metabolism within cells.

Supplier: DuPont

These Tyvek® overalls are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size).

Supplier: JULABO GmbH

Environmentally friendly recirculating coolers that saves tap water, these units were designed for simple cooling tasks where reliable continuous operation is important. Due to their compact design, the coolers can be positioned either on or under laboratory bench tops. Units can be used with water, water/glycol or Julabo Thermal G. They are ideal for cooling rotary evaporators, Kjeldahl instruments, measurement cells, automated analysis systems, CCD cameras, polarimeters, refractometers, calorimeters and Soxhlet apparatus.

Supplier: Integra

In the laboratory small volumes of liquid need be disposed of on a daily basis. This includes the removal of excess liquids from reaction tubes, aspiration of supernatant after centrifugation steps, removal of washing solutions from microplates and much more. This is often accomplished by self-made systems consisting of a trap flask, a rudimentary aspiration tool and an external vacuum source.

Supplier: Brand

The Transferpette® S air displacement pipette allows you to work efficiently and ergonomically with both small and large volumes. Due to its perfect ergonomics, the Transferpette® S provides a comfortable grip in any hand position, whether you are right- or left-handed, or have big or small hands.

Supplier: Bohlender

Safe collection of hazardous waste is an important part of the laboratory work routine. b.safe waste caps connect waste lines from your HPLC/UHPLC leak-tight with your waste container. The waste caps are available in various sizes to fit your specific waste container safely.

Supplier: Brand

The PD-Tips II dispenser tips for efficient, step-by-step dispensing enhance the proven features of the classic BRAND PD-Tips. Thanks to patented size coding, HandyStep® touch and HandyStep® electronic automatically detect the tip volume. The tips are also compatible with all other instruments of the HandyStep® family and with repetitive pipettes from other manufacturers.

Supplier: VWR Collection

Designed for the preparation of buffers, tissue culture media, microbiological media and other biological fluids. These vacuum filtration systems feature large diameter high performance PES membranes for guaranteed performance and maximum throughput. The full assembly includes a filtration unit and a receiver bottle with an ergonomic shape, moulded finger grips and a patented bottle cap. The centrifuge tube and funnel system allows the user to filter fluids directly into a 15 or 50 ml tube.