Immersion sampler

Completely made from non spark-producing materials, nickel plated.

• Screw-off top enables easy cleaning
• High weight for fast lowering
• Robust handle

Immersion cylinder for sampling crude oil, liquid mineral oil products, fuels, special and test fuels, fuel oils, petroleum, and liquid lubricants in explosion categories IIA, IIB, and IIC.

Point sampling: Two lowering cables are required for this (bearer cable and hauling cable). Lower the immersion cylinder to the required depth. When the target has been reached, pull on the hauling cable, the valve opens. The sample flows into the bottle. Release the hauling cable. The valve closes. Pull the cylinder back on the bearer cable. Empty the cylinder via the valve at the bottom.

Bottom sampling: Lower the immersion cylinder on the cable to the ground. The valve opens automatically because of the immersion cylinder's own weight. The sample flows into the cylinder. Pull the cylinder back on the cable, the valve closes independently. Empty the cylinder via the valve at the bottom.

Certifications: Tested for use in the Ex protection zone 0.

Ordering information: Please order the appropriate lowering cable at the same time.