You searched for: Environmental Test Kits

Supplier: MACHEREY-NAGEL

Test kit for the determination of cyanide in water samples.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of silver in water samples.

Supplier: MACHEREY-NAGEL

This test paper allows the rapid detection of Bismuth. In the presence of Bismuth ions (Bi³⁺) it shows an orange-red discolouration on a pale-yellow background.

Supplier: MACHEREY-NAGEL

Reagents for the determination of zinc in water samples.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of manganese in water samples.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of organic complexing agents in water samples.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of cadmium in water samples.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of chromate in water samples.

Supplier: MACHEREY-NAGEL

These test strips allow the quick and easy determination of the water quality in swimming pools. The test provides valuable results about the Cyanuric acid content.

Supplier: MACHEREY-NAGEL

The test paper allows the easy and reliable detection of hydrogen sulphide. This gas occurs in the processing of raw oil. It is toxic even in low concentrations. Therefore, critical points are carefully checked.

Supplier: MACHEREY-NAGEL

The VISOCOLOR® testkits are devided into VISOCOLOR® alpha, ECO and HE. Every product range offering its specific strenght to provide a tailored test for each and every user and application.

Supplier: MACHEREY-NAGEL

This test paper allows the easy detection of arsine (AsH₃) in the gas phase. Arsenic in solutions has to be converted into AsH₃ with Zn/acid and purged from the solution. The Arsine is detected directly at the boundary layer between water and air.

Supplier: MACHEREY-NAGEL

This test paper allows the quick and easy detection of Cobalt (Co²⁺). For non-destructive testing of materials apply a drop of acid solution (50 ml hydrogen peroxide 3% + 7,5 ml O-phosphoric acid 85% + 5 ml hydrochloric acid 37 %) to the degreased surface.

Supplier: MACHEREY-NAGEL

Semi-quantitative test strips for reliable determination of chlorine concentrations as low as 0,05 mg/L (ppm). A hole in the plastic carrier allows the water to migrate through the test pad increasing the sensitivity by a factor of nearly 10. Ideal for rapid and easy analysis of chlorine directly on-site. No maintenance or calibration is required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. QUANTOFIX® test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. QUANTOFIX® test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready to use. They do not require additional accessories. The test strips are intended for single-use, maintenance or calibration are not required.

Supplier: Hach

Test kit, Phenolphthalein indicator Powder Pillows

Supplier: Hach

Test kit, Chlorine (total), Range: 0,02 - 2,00 mg/l

Supplier: Thermo Orion

Two-step direct measurement of total alkalinity and pH using a pH electrode.

Supplier: Hach

The drop count test is a simple, easy and cost-effective way to test for many parameters like chlorine, chloride, dissolved oxygen, carbon dioxide, sulphite, nitrogen, formaldehyde, and more.

Supplier: Hach

AL-36B can measure acidity, alkalinity, carbon dioxide (1,25 to 100 mg/L), dissolved oxygen (0,2 to 20 mg/L), hardness and pH (4 to 10).

Supplier: Thermo Orion

Orion™ AQUAfast™ COD reagents in digestion tubes are designed for use with Orion™ AQUAfast™ colorimeters and Orion™ AquaMate Vis and UV-Vis spectrophotometers. Just add the sample to the COD digestion tube, digest sample in thermoreactor and measure.

Supplier: Hach

Test kit, Aluminum (AluVer® 3), Range: 0 - 0,80 mg/L

Supplier: Hach

Test kit, Monochlor F reagent powder pillows, Range: -