You searched for: Samplers

Supplier: BURKLE

The scratcher is designed for powders and granules that do not flow freely.

Supplier: BURKLE

Very robust sampler for heavy and stony soils. The model with 1000 mm flute length has a conically-tapered 60 cm tip which makes it much easier to extract the driven-in sampler.

Supplier: BURKLE

Disposable ZoneDispo samplers for pourable bulk goods up to 2 mm particle size.

Supplier: BURKLE

Glass bottle and hose are connected in such a way that they conduct electricity and are grounded via a grounding cable. Operation: Ground the device, immerse the suction hose to the required depth, attach the adapter to the sampling bottle, generate a vacuum with the manual pump and collect the sample, remove the filled sampling bottle, close it and label it.

Supplier: BURKLE

Samplers available in three sizes.

Supplier: BURKLE

GeoSampler is specially designed for soil sampling.

Supplier: BURKLE

This disposable DispoPicker is used in the sampling of powders and small-grain bulk materials. Because the tip is closed, the sample material cannot trickle back out of the sample lance.

Supplier: VWR Collection

Environmental monitoring in cleanrooms is important and a critical part of the production chain for a manufacturing company.

Supplier: BURKLE

Cleaning reusable samplers is a demanding and often complicated task, with greasy, strongly adhesive or toxic substances. An ergonomic handle makes it easier to draw the sample as with a syringe.

Supplier: BURKLE

DispoLadle is a sampling scoop specially designed for disposable use. The scaled scoop with embossing can be used for measuring. It shows contents in increments of 10 ml.

Supplier: BURKLE

The scratcher has particularly been designed for sampling cohesive or caked substances.

Supplier: BURKLE

Disposable plunging samplers acting like siphons.

Supplier: BURKLE

Sampler developed for sampling from frozen, highly viscous, paste-like materials such as ice-cream and similar substances. The drill-shaped cutter screws itself into the frozen goods independently when being rotated. The collection cylinder can easily be detached via a bayonet connection. The sample is then available and can be removed.

Supplier: BURKLE

Material: V4A stainless steel (1.4404). Sampler for thin to viscous liquids.

Supplier: BURKLE

Sampler for free flowing bulk goods up to approx. 10 mm diameter. This makes it possible, for example, to remove hazel nuts, blends of tea, grain or similar items from large sacks.

Supplier: VWR Collection

White PTFE ladle.

Supplier: BURKLE

ViscoSampler with powerful suction for viscous media. The media is drawn up and discharged using the suction flask.

Supplier: BOCHEM

Cork borers made of hard coated nickel-plated brass.

Supplier: VWR Collection

When environmental contamination is very low, and the number of samples to be performed is high, operational duration can be an important factor in the choice of SAS instrument. Two sampling heads that operate simultaneously to sample 1000 litres of air, in less than 3 minutes, is the solution.

Supplier: BURKLE

Mini immersion cylinder for sampling liquids in narrow places where access is difficult.

Supplier: BURKLE

To make a sampling procedure reproducible, it should always be carried out under the same conditions. For this purpose, the depth stop for samplers is a helpful accessory.

Supplier: BURKLE

Suction samplers for viscous media such as paste, sludge, cream, or oil.

Supplier: BURKLE

This disposable TargetDispo sampler is to take a target point sample at a position in the sample material that has previously been precisely determined. Sampler is closed while it pierces into the powder or granulate, when it reaches the sample removal point it is opened and then closed again, in this way a precise target-point sample is obtained.

Supplier: BURKLE

ProfiSampler, the vacuum-operated sample collector for robust industrial use.

Supplier: BURKLE

Made of ultra-pure and chemically inert PTFE/FEP or PP for contamination-free sampling. Fits all vats and barrels with openings of at least 32 mm Ø.

Supplier: BURKLE

For sampling bulk goods, cross-sectional samples can be taken from different sample depths. Suitable for use with a range of sample substrates from fine powder to coarse grain. Multi sampler has three or five separate chambers for taking samples at multiple depths in one action. Uno sampler has one chamber for taking a sample at one specified depth. All layer sampler has no chambers, three or five inlets and this allows one sample to be taken at multiple depths. Jumbo sampler has no chambers and three, five or seven inlets; with a 50 mm tube diameter this is ideal for larger grain sizes and quantities.

Supplier: BURKLE

With EasySampler, it is possible to take multiple samples from bulk goods, quickly and easily.

Supplier: BURKLE

Made of stainless steel or PP, transparent, sample bottles made of PE. The QuickPicker is appropriate when bulk goods are withdrawn directly from sacks, bags or open containers. The sample is filled directly into sample bottles. Sampling depth 300 mm, Ø 25 mm, length 500 mm, 75 ml volume.

Supplier: BURKLE

Stainless steel sampler for powders. The conical inlet allows for collection of different sample sizes, up to approximately 50 ml. Constructed without edges, grooves or crevices for easy cleaning. The sample is collected directly into the sampling bag which is held in place with the included clamp. StickProof borehole diameter 25 mm; chamber length 120 mm. Sampling bags: 170×120 mm for 400 ml.

Supplier: BURKLE

TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net) are attached to the telescopic rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses. Sampling depths down to 6 m can be reached with the adjustable telescopic aluminium rod.