Supplier: KNF

These diaphragm liquid pumps work quietly and with little vibration to pump neutral and aggressive liquids. Application: Transferring liquids.

Supplier: Avantor Fluid Handling

Compatible with the Bürkle Stainless Steel Barrel Pumps For flammable Liquids.

Supplier: Avantor Fluid Handling

Ideal for most acid/base or ionic salt applications.

Supplier: Avantor Fluid Handling

Safely transfer corrosive solvents.

Supplier: BURKLE

The magnetic centrifugal pumps are suitable for transferring acids, alkalis, alkaline and electroplating baths, photography chemicals as well radioactive, sterile and highly corrosive liquids. The drive, via contact-free magnetic force transfer, requires no dynamic shaft seals and this makes a hermetically sealed pump housing possible, which means that it cannot leak.

Supplier: Avantor Fluid Handling

Ideal for most acid/base or ionic salt applications.

Supplier: Avantor Fluid Handling

Keep hands-free for safe dispensing.

Supplier: Bohlender

Cordless pumps are made of PP, PTFE and Hastelloy®. They are applicable for pumping low viscous liquids.

Supplier: Avantor Fluid Handling

Dispense a variety of liquids compatible with polypropylene, Ryton® PPS, cast iron, aluminum, stainless steel, or PTFE.

Supplier: Avantor Fluid Handling

Ideal for removing water in municipal and irrigation markets in addition to facilities maintenance.

Supplier: BURKLE

The telescopic immersion tube adapts itself to the container height on insertion of the foot pump. This ensures good removal of residual liquid and means that the foot pump can be used with different containers.

Supplier: BURKLE

Piston pump is used for watery and petrochemical products.

Supplier: BURKLE

Lever pump is used for petrochemical substances.

Supplier: BURKLE

Barrel pump is used for highly flammable hydrocarbons such as ethanol, benzene, butanol, isopropanol, kerosene, methanol and many more.

Supplier: Avantor Fluid Handling

Ideal for contamination-free removal of organic solvents.

Supplier: Avantor Fluid Handling

Ideal for most acids, bases, alcohols, aldehydes and aliphatic hydrocarbons.

Supplier: BURKLE

OTAL® pump with disposable delivery tube made of PE. In OTAL® pumps the medium being transferred only comes in contact with the delivery tube. The disposable delivery tube can be replaced quickly and easily after use.

Supplier: BURKLE

These drum pumps are suitable for highly aggressive acids and alkalis, such as sulphuric acid, nitric acid, hydrofluoric acid, sodium hypochlorite and more.

Supplier: BURKLE

These drum pumps prevent the escape of dangerous or hazardous vapours when decanting liquids. The vapours produced are fed back to the decanting container from the filling container via the gas displacement line. The gas and liquid lines are also equipped with stop valves.

Supplier: BURKLE

The Mini solvent pump is a high quality hand pump for small containers such as bottles, canisters and tanks up to about five litres. For reliable filling and dosing of solvents and readily flammable liquids.

Supplier: BURKLE

Manual positive displacement pump for filling, emptying, and transferring liquids between canisters and barrels. Positive pressure is produced using a manual piston and forces the liquid out of the container. Small quantities of liquid can also be drained off with the drain cock. The pump is fitted onto the barrel with a flexible, variable diameter plug. No special thread adapters are needed.

Supplier: BURKLE

Barrel pump, made of stainless steel AISI 304 (1.4301), suitable for filling combustible and easily flammable liquids. It can conduct electricity and, therefore, fulfils the requirements for handling flammable liquids in combination with the accessory anti-static set.

Supplier: BURKLE

Foot operated solvent pumps for filling of high purity liquids such as solvents. All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE.

Supplier: BURKLE

Canister pump in PP with FKM gasket. For emptying containers, carboys and small barrels up to 60 litres, quickly and cleanly. Pressure is built up with the manually operated piston and forces the liquid out of the container. Suitable for weak acids, alkalis and petrochemicals.

Supplier: BURKLE

The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid and means that the hand pump can be used with different containers.

Supplier: BURKLE

Hand-operated solvent pump for contamination free removal of organic solvents and flavouring agents. All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE.

Supplier: BURKLE

Gas tight barrel pump with flexible discharge hose for filling off in to large canisters and containers.

Supplier: BURKLE

These pumps are ideal for decanting high purity liquids. Materials in contact with liquid are PTFE and FEP, these enable liquids, which attack conventional materials such as PP and PVC, to be pumped (except elemental fluorine). The stopcock, made of PTFE, prevents the escape of hazardous vapours and stops dripping.

Supplier: BURKLE

The withdrawal system for solvents with discharge tube has a barrel pump with fixed discharge tube. The steplessly adjustable immersion tube of the barrel pump can be adjusted to the respective tank. With barrel screw connection for steel barrels with R 2' thread. Can be adjusted for standard commercial tanks with thread adapters.

Supplier: BURKLE

The barrel pumps AccuOne and EnergyOne with the unique hybrid system ensure fast, flexible and convenient filling. The pumps are equipped with two different power supply systems: AccuOne, driven by a high-performance rechargeable battery or EnergyOne, with a power cable for direct connection to the electrical network. AccuOne and EnergyOne are designed for applications in which even very small amounts of liquid can be added to containers with narrow openings. They are made of high quality materials PP, PTFE and Hastelloy C, to ensure outstanding chemical resistance. This also makes them suitable for dispensing acids and bases.