You searched for: Pumps

Supplier: Avantor Fluid Handling

No metal wetted parts permit use with corrosive liquids.

Supplier: BURKLE

Drum pumps in PP, with rigid discharge tube or flexible PVC discharge hose with stopcock. Fast simple decanting of liquids from drums, canisters and tanks.

Supplier: BURKLE

Manual positive displacement pump for filling, emptying, and transferring liquids between canisters and barrels. Positive pressure is produced using a manual piston and forces the liquid out of the container. Small quantities of liquid can also be drained off with the drain cock. The pump is fitted onto the barrel with a flexible, variable diameter plug. No special thread adapters are needed.

Supplier: Avantor Fluid Handling

Small pump cavity, two check valves, and high stroke frequency combine for superb self-priming and degassing properties.

Supplier: BURKLE

The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid and means that the hand pump can be used with different containers.

Supplier: BURKLE

Hand-operated solvent pump for contamination free removal of organic solvents and flavouring agents. All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE.

Supplier: VWR Collection

The VP 220 is ideal for rotary evaporators providing the powerful vacuum needed for demanding evaporations without the use of oil pumps. VP 220 has built-in Advanced Vapour Management (AVM) which means precise control capability for the distillation of organic solvents and applications handling aggressive vapours and gases. The VP 220 is especially effective for rotary evaporation of low boiling point solvents such as acetone and ethanol and is able to rapidly strip DMF at 35 °C. The pump parts are all made of corrosion resistant materials such as PTFE and Kalrez to handle aggressive vapours, and together with vacuum adjustment, the evaporation process will be optimised. Use the vacuum adjustment to increase the vacuum until bubbles form in the evaporation flask - then lower it slightly. Reduce the vacuum for fast reaction to bumping or foaming.

Supplier: Avantor Fluid Handling

Chemical-resistance pump heads provide dependable performance and continuous service.

Supplier: Avantor Fluid Handling

Maintenance-free drives built for precision dispensing.

Supplier: BURKLE

These are light- and high-performance pump to transfer small quantities of watery media up to 300 mPas from canisters, barrels and narrow necked containers from 32 mm opening diameter. Laboratory pumps, with splash water protected motor 230 V/200 W (IP 44), with 1,5 m PVC-hose, PP nozzle, 2 hose clips, discharge spout, wall bracket.

Supplier: KNF

Chemically resistant, oil-free diaphragm vacuum pump featuring PTFE heads, PTFE-coated diaphragms and FFPM valves. An integrated self-drying system prevents the accumulation of condensates within the pump heads. Ideal for applications with exceedingly wet vapors.

Supplier: Avantor Fluid Handling

Remote flow rate control via analog signal or RS232 interface.

Supplier: Avantor Fluid Handling

Powerful, low-maintenance drives are versatile and cost-effective.

Supplier: Avantor Fluid Handling

Investment cast stainless steel (SS) pumps are built sturdier for heavy-duty, high performance applications requiring excellent chemical resistance.

Supplier: Avantor Fluid Handling

Move fluids with viscosities up to 11,000 cp.

Supplier: Avantor Fluid Handling

Smooth pulseless flow provides precise, leak-free delivery of fluids.

Supplier: Avantor Fluid Handling

A variety of low-cost drives for numerous applications.

Supplier: HIRSCHMANN

The rotarus® peristaltic pump series has a selection of different motors, varying housing safety classes and intelligent control of delivery volumes, covering a broad spectrum of application areas in the laboratory or industry.

Supplier: Avantor Fluid Handling

Twin bearing system handles thrust loads for extended service life.

Supplier: Avantor Fluid Handling

Accurate volumetric dispensing of 4 microliters to 250 microliters.

Supplier: Avantor Fluid Handling

DC-Powered motors are lightweight and portable – excellent for outdoor sampling and transfer of fluids.

Supplier: DWK Life Sciences

DURAN®, borosilicate glass 3.3, clear.

Supplier: Avantor Fluid Handling

Heavy-duty impeller spindle and fluted impeller combine for efficient cooling.

Supplier: Avantor Fluid Handling

Compatible with three distinct fuel classifications.

Supplier: Avantor Fluid Handling

Twin bearing system handles thrust loads for extended service life.

Supplier: Avantor Fluid Handling

Optimize performance of your Masterflex® Low-Flow Peristaltic Pump.

Supplier: BURKLE

These drum pumps prevent the escape of dangerous or hazardous vapours when decanting liquids. The vapours produced are fed back to the decanting container from the filling container via the gas displacement line. The gas and liquid lines are also equipped with stop valves.

Supplier: BURKLE

Gas tight barrel pump with flexible discharge hose for filling off in to large canisters and containers.

Supplier: Avantor Fluid Handling

Twin bearing system handles thrust loads for extended service life.

Supplier: Avantor Fluid Handling

Rugged continuous-duty service with chemical and corrosion resistance.