You searched for: Evaporators

Supplier: LABCONCO

These systems use vacuum along with heat and vortex motion to help speed evaporation and provide an alternative to traditional centrifugal evaporation methods. The systems may be used with a broad range of aggressive chemicals. Heat is supplied by a dry block heating system that, unlike water baths, adds no potential source of contamination and requires no maintenance.

Supplier: LABCONCO

An efficient, automatic evaporator system which can be used with a broad range of aggressive chemicals. In RapidVap N₂ systems, a stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow-down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 or all 8 tube locations. Vortex motion and dry heat may also be applied to further accelerate processing.

Supplier: VWR Collection

This is a basic chemical laboratory instrument suitable for evaporation, distillation and separation of chemicals. It can be used as a multifunctional system in combination with a vacuum pump, vacuum controller and refrigerated circulator to provide excellent distillation solutions in many laboratory applications.

Supplier: VWR Collection

This is an essential instrument for use in chemical laboratories for efficient and gentle removal of solvents from samples by evaporation. It offers an excellent distilling solution in a wide range of applications.

Supplier: LABCONCO

This evaporator speeds evaporation of up to 50 samples at the same time using dry heat and nitrogen blow down. Unlike water bath heaters, the dry block heater requires less maintenance, no distilled water or additives, and adds no potential source of contamination.

Supplier: LABCONCO

This system uses nitrogen blow down, vortex motion and heat to speed evaporation of up to 48 small samples or eight 450 milliliter samples at once.

Supplier: IKA

Rotary evaporators with integrated heating bath, safe and simple operation via ergonomic controls situated at the front.

Supplier: IKA

These entry-level evaporators are ideal for all standard evaporation applications in universities and research laboratories. The functions of the RV10 control have been extended and improved to enable fully automatic distillation: With automatic boiling point determination, an integrated solvent library and the option to connect a speed-controlled vacuum pump.

Supplier: LABCONCO

The refrigerated CentriVap centrifugal concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature. The concentrator combines a refrigeration system that cools to −4 °C with a heater that warms to 100 °C to achieve the user's desired set point temperatures. With an epoxy-coated aluminum chamber.

Supplier: LABCONCO

The CentriVap micro IR vacuum concentrator has a very small footprint and therefore fits in tight spaces. It is ideal for small samples such as DNA and small throughput in molecular biology, proteomics, genomics, genetics, cell biology and drug discovery labs.

Supplier: IKA

The RV 3 rotary evaporator is the ideal entry-level model from the IKA rotary evaporator portfolio. It is suitable for a multitude of uses in the chemical, pharmaceutical, and biotechnology industries, in research and development, in manufacturing or quality assurance, in laboratories, and in plant construction. Thanks to specially designed glass guides, the condenser makes extremely efficient use of the 1500 cm² cooling surface and is space saving.

Supplier: LABCONCO

CentriVap® vacuum concentrators are available in a range of configurations. The CentriVap® DNA model is supplied with a built-in 34 litres/min diaphragm pump, two 177 ml glass traps and a DNA rotor (60×1,5/2,0 and 72×0,5 ml). Model with glass lid is recommended for evaporation of solvents that are not compatible with acrylic (acetone, acetonitrile, ethanol, DMSO, etc.). The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, etc.).

Supplier: LABCONCO

CentriVap® vacuum concentrators are available as complete systems or system packages. The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, and so on). Other models feature Heat Boost, which surrounds the chamber wall, to further speed evaporation of high boiling point solvents.

Supplier: IKA

Rotary evaporators with integrated heating bath, features include an innovative control concept with a bright, high-contrast, TFT, colour-graphic control panel, an integrated vacuum controller, cooling water monitoring and mature safety standards.

Supplier: EPPENDORF

This ergonomic, intuitive concentrator provides quick, efficient and gentle vacuum concentration of DNA/RNA, nucleotides, proteins and other liquid or wet samples. The coated lid provides superior chemical resistance against aggressive acids and organic solvents (e.g. TFA, DMSO).

Supplier: LABCONCO

This mobile system with or without heat boost combines the separate vacuum concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 13 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump — the only additional component necessary to begin processing.

Supplier: BUCHI

Compact device for parallel vacuum evaporation of up to 12 samples. Used in conjunction with a Rotavapor®, this enhances performance by transferring vapours to the condenser of the rotary evaporator; used alone, it offers an alternative independent solution.

Supplier: BUCHI

Spider evaporators are ideal when users need to concentrate several samples under the same conditions.

Supplier: BUCHI

This compact instrument for parallel evaporation of up to six samples under vacuum conditions is designed to optimise existing personal process workflows such as work-up of synthesys samples, evaporation of extraction samples or chromatographic fractions.

Supplier: BUCHI

The Rotavapor R-250 EX is the EX rated version of the Rotavapor R-250. It fulfills the high requirements of the ATEX regulations and fits perfect to your Ex-proof production laboratory. It is designed for easy and safe operation combined with high performance.

Supplier: BUCHI

For drying, distillation, dry freezing and sublimation of small quantities. Ideal for fractional distillation of small quantities of solvents up to 300 °C.

Supplier: BUCHI

Small drying oven with metal housing and robust platform; glass drying chamber for optimal monitoring of the sample. Solvent residues can be dried up to a maximum temperature of 300 °C.

Supplier: BUCHI

This ATEX-compliant version of the R-220 was specially developed for applications in EX zones and is compliant with the extremely stringent ATEX 95 directives. The Rotavapor R-220 EX is suitable for EX zones class 1 and 2, and provides the highest possible safety combined with maximum convenience.