You searched for: Vials

Supplier: VWR Collection

Clear and amber glass vials with a rounded or flat bottom, and volumes from 5 to 20 ml and closures. A rounded bottom vial is more sturdy and resistant to high pressure during the heating process. Flat bottom vials are more appropriate for certain instruments.

Supplier: KIMBLEKONTES

These EPA water analysis vials with screw thread closures are ideal for the collection and storage of water samples.

Supplier: VWR Collection

Short screw thread ND9, wide opening, thread HPLC vial with matched PP screw caps ND9, PTFE/silicone septa and micro-insert.

Supplier: VWR Collection

VWR®, Vial insert, 0,20 ml, Glass, Clear, Ø×H: 6×31 mm, Flat bottom, Non sterile, Cap included: No

Supplier: KIMBLEKONTES

Sample vials made from clear KIMAX® KG-33 borosilicate glass.

Supplier: Simport Scientific

PP vial and closure. Designed for the storage of biological material, human or animal cells, at temperatures as low as −196 °C (but should be used only in the gas phase of liquid nitrogen).

Supplier: VWR Collection

Snap ring ND11 vials manufactured from 1st hydrolytic class borosilicate glass with flat bottom. They can be purchased with a variety of polyethylene seal styles and septa materials.

Supplier: Simport Scientific

General purpose vials made from PP and HDPE for liquid scintillation and gamma counting, chromatography, sample storage and culturing. Can be used with the LKB and Packard Varisette counters.

Supplier: KIMBLEKONTES

Ideally suited for handling, containing, and storing a variety of liquids, including reagents, vaccines, and chromatography samples. These crimp top serum vials are lighter in weight than molded bottles. More closely held tolerances and uniformity of glass allow the vials to be lyophilised.

Supplier: KIMBLEKONTES

These shell vials are made from clear KIMAX® N-51A borosilicate glass.

Supplier: VWR Collection

Type I clear borosilicate glass vials are for use in various analyses and in specimen, extract and standards storage. They are prepared in a solvent-free facility to prevent possible volatile contamination. Vials are available with PP solid-top or open-top caps. Solid-top caps feature fluoropolymer resin liners. Open-top caps feature ultrasonically bonded 3,1 mm fluoropolymer resin/silicone septa and are for volatile organic analyses.

Supplier: KIMBLEKONTES

These shell vials are made from clear KIMAX® N-51A borosilicate glass.

Supplier: VWR Collection

VWR®, Vial insert, 0,25 ml, Borosilicate glass, Ø×H: 31×5,7 mm, Non sterile, Cap included: No, Cap Size: ND10

Supplier: KIMBLEKONTES

Sample vials made from clear borosilicate glass.

Supplier: KIMBLEKONTES

Sample vials made from clear KIMAX® KG-33 borosilicate glass.

Supplier: VWR Collection

VWR®, Vial insert, 0,20 ml, Glass, Clear, Ø×H: 5×31 mm, Flat bottom, Non sterile, Cap included: No

Supplier: KIMBLEKONTES

Sample vials made from 51 expansion borosilicate glass.

Supplier: VWR Collection

These scintillation vials made from borosilicate glass fit all standard counting equipment for liquid scintillation systems.

Supplier: KIMBLEKONTES

Screw threaded sample vials made from 51 expansion borosilicate glass, with unattached closures.

Supplier: VWR Collection

ND11 crimp neck vials are manufactured from 1st hydrolytic class borosilicate glass with flat bottom. They can be purchased with a variety of aluminium seal styles and septa materials.

Supplier: VWR Collection

Short thread ND9 vials manufactured from 1st hydrolytic class borosilicate glass with flat bottom. They can be purchased with a variety of polypropylene seal styles and septa materials.

Supplier: VWR Collection

Snap cap vials manufactured from 1st hydrolytic class borosilicate glass with flat bottom. They should only be used for storage of solids and powders.

Supplier: KIMBLEKONTES

Sample vials made from clear KIMAX® KG-33 borosilicate glass.

Supplier: KIMBLEKONTES

Autosampler vials made from borosilicate glass, type 1.

Supplier: VWR Collection

These general-purpose vials with screw cap are made from borosilicate glass. They are available in either a short form or capsule style. The cap on the vial is the same diameter as the body, fitting flush to the shoulder.

Supplier: Corning

These vials are manufactured from polypropylene to withstand temperatures down to –196 °C.

Supplier: VWR Collection

ND10 screw neck vials are manufactured from 1st hydrolytic class borosilicate glass with flat bottom. They can be purchased with a variety of polypropylene seal styles and septa materials.

Supplier: DWK Life Sciences

Manufactured from clear polyethylene terephthalate (PET) these vials have advantages over glass counting vials of low background count, economy and virtual unbreakability.

Supplier: VWR Collection

Snap ring ND11 vials manufactured from 1st hydrolytic class borosilicate glass with flat bottom. They can be purchased with a variety of polyethylene seal styles and septa materials.

Supplier: VWR Collection

Headspace ND18 vials with screw neck manufactured from 1st hydrolytic class borosilicate glass with a round bottom. They can be purchased with a variety of magnetic aluminium screw caps and septa materials.