You searched for: Microplate Seals

Supplier: VWR Collection

These 77,5 µm thick polyester films provide secure sealing around every well, not just a cover, thus minimising evaporation, preventing spillage and well-to-well contamination, and eliminating 'edge effects' in sensitive ELISA assays. Polyester films can also be used with cell culture plates for short-term storage, incubation, and containment of biohazards.

Supplier: VWR Collection

These 50 µm thick polyester films provide secure sealing around every well, not just a cover, thus minimising evaporation, preventing spillage and well-to-well contamination, and eliminating 'edge effects' in sensitive ELISA assays. Polyester films can also be used with tissue culture plates for short-term storage, incubation, and containment of biohazards.

Supplier: Avantor

Suitable to use with J.T.Baker® Plate Round Well 43001-0010, 43001-0016 or 43001-0116.

Supplier: VWR Collection

Polyester film, acrylic adhesive. These 49,5 µm thick polyester films minimise evaporation and prevent spillage and contamination between wells.

Supplier: VWR Collection

These heat resistant 50 µm thick films are designed for thermal cycling applications. Polypropylene films are not pierceable. For PCR applications where piercing with pipette tips or robotic probes is required for product recovery, use aluminium foil films. For Real-Time PCR applications where maximum optical clarity is required, use optically clear polyester films.

Supplier: Thermo Fisher Scientific

Adhesive seals for microplates. 100 sheets per pack.

Supplier: VWR Collection

Identical to polyester films above, but include a colour dot and white writing area on each end tab for plate identification. End tabs with backing removed adhere to the ends of the plate and are perforated so they can be left in place even if the centre portion of the film is removed. Alternatively, one inscribed colour-coded end tab can be removed and pasted in a laboratory notebook while the other remains on the plate.

Supplier: Thermo Fisher Scientific

Effective sealing of all microplate formats. For storage, PCR, microscopy, culture and protection.

Supplier: VWR Collection

These heat resistant 74,9 µm thick films are designed for thermal cycling applications. Polypropylene films are not pierceable. For PCR applications, where piercing with pipette tips or robotic probes is required for product recovery, use aluminium foil films. For real-time PCR applications, where maximum optical clarity is required, use optically-clear polyester films.

Supplier: VWR Collection

These films are 240 µm thick black vinyl with adhesive for use with 96-well, 384-well and 1536-well black microplates. They fit within the edges of raised rim plates and may be applied to either the plate top or bottom. The light blocking and absorbing properties of these films make them ideal for reducing stray light and crosstalk in fluorescence applications and for protecting light-sensitive samples in storage.

Supplier: VWR Collection

A 139,7 µm thick hydrophobic porous film with medical grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. These rayon films minimise cross-contamination, spillage and evaporation. They allow uniform air and CO₂ exchange for all wells, unlike plate lids which favour exchange for wells near plate edges. Sterile product is packed in tamper evident bags of 25.

Supplier: BIOTIX

Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, Sealing tape, for 96 well PCR plates

Supplier: Corning

Easy application and removal for short and long-term storage. Provides tight seal to minimise evaporation and condensation.

Supplier: Thermo Fisher Scientific

Designed to protect microplate well contents by facilitating a tight seal.

Supplier: Simport Scientific

These adhesive films, suppliedin sheets, are compatible with most automated adhesive SBS plate sealers.

Supplier: Simport Scientific

Amplate™, Microplate seal, Mat (96 wells), Single sheet/mat/strip, Sealing mat for 96-well PCR plates, Santoprene™, Blue

Supplier: Thermo Fisher Scientific

Polyester film with acrylic adhesive. Provides an effective seal for all MicroWell™ plates used in PCR and cell culture.

Supplier: Simport Scientific

Adhesive sealing films reduce sample-to-sample or well-to-well contamination and/or spill over. SecureSeal™ has the differential advantage of perforated end tabs and a multiple split backing which allow for easier and more accurate positioning and more secure sealing. The polyester based film with acrylic adhesive is inert and thus compatible with almost all microplate procedures. SecureSeal™ is less than 0,001% moisture permeable under high humidity conditions and less than 0,01% oxygen permeable.

Supplier: Corning

Multiple formats for specific and precise fit on 96-well and 384-well plates and blocks.

Supplier: Simport Scientific

Designed to fit the Bioblock™ family, these mat covers are made of a specially formulated plastic ensuring great flexibility. They allow for maximum sample volume in each well. They are resistant to DMSO and biological buffers.

Supplier: EPPENDORF

Ensure airtight sealing of your PCR plates with Eppendorf® PCR films and foils. Tailor your choice to your assay needs, like the Masterclear® real-time PCR film, optimal for qPCR with its superior optical characteristics, or heat-sealing options for the best evaportion protection.

Supplier: Simport Scientific

Superflex™, Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, Closure for SuperFlex™ 96-well PCR plates, PP, Clear, Non sterile

Supplier: Thermo Fisher Scientific

Clear, 24-well format Piko® PCR/qPCR film seal allows high transmission of fluorescence across the range of commonly used fluorophores. When used with a Piko® thermal cycler or PikoReal® Real-Time PCR system, sample volumes as low as 5 µl can be used with minimal evaporative loss.

Supplier: Simport Scientific

Transparent adhesive sealing film is ideal for reducing cross contamination and/or spill over in PCR applications. 

Supplier: EPPENDORF

Secure your samples with Eppendorf® Microplate self-adhesive film and foil, perfect for incubation and short-term storage. Films protect from punctures while aluminium foils shield light-sensitive samples with easy sealing.

Supplier: MP Biomedicals

Microplate seal, Heat sealing film/foil/tape (96/384 wells), Single sheet/mat/strip, Plate sealer

Supplier: MP Biomedicals

Clear adhesive seals for multiwell plates and tissue culture plates.

Supplier: THERMO MATRIX TECHNOLOGIES

Round or square capped mats for sealing 96-well storage plates.

Supplier: Brand

Transparent PP film allows the visual inspection of the samples. Temperature range: −40 to +125 °C.

Supplier: Corning

Polyester based with uniformly and consistently applied acrylic adhesive to eliminate the edge effect in ELISA assays. Suitable for sealing tissue culture plates, for short-term storage and incubation, for transport and the containment of biohazardous solutions.