You searched for: Microplate Seals

Supplier: Simport Scientific

Adhesive sealing films reduce sample-to-sample or well-to-well contamination and/or spill over. SecureSeal™ has the differential advantage of perforated end tabs and a multiple split backing which allow for easier and more accurate positioning and more secure sealing. The polyester based film with acrylic adhesive is inert and thus compatible with almost all microplate procedures. SecureSeal™ is less than 0,001% moisture permeable under high humidity conditions and less than 0,01% oxygen permeable.

Supplier: Corning

Easy application and removal for short and long-term storage. Provides tight seal to minimise evaporation and condensation.

Supplier: VWR Collection

VWR®, Microplate seal, Cap strip, Single sheet/mat/strip, Cap strip for PCR plates and tube strips, flat, Non sterile

Supplier: VWR Collection

Adhesive sealing film or foil rolls constructed on plastic cores, for use with high throughput automated microplate sealers.

Supplier: Thermo Fisher Scientific

Adhesive seals for microplates. 100 sheets per pack.

Supplier: VWR Collection

Transparent silicone mats fit most brands of 96-well PCR plates.

Supplier: VWR Collection

1x8 adhesive sealing strips are ideal for use with 1x8 strip-well ELISA plates.

Supplier: Thermo Fisher Scientific

Designed to protect microplate well contents by facilitating a tight seal.

Supplier: Simport Scientific

Amplate™, Microplate seal, Mat (96 wells), Single sheet/mat/strip, Sealing mat for 96-well PCR plates, Santoprene™, Blue

Supplier: Avantor

J.T.Baker®, Microplate seal, Mat (96 wells), Single sheet/mat/strip, Capmat for J.T.Baker® Plate Medio, Well top shape: Round, EVA, Transparent, Non-pierceable, Non sterile

Supplier: Simport Scientific

These adhesive films, suppliedin sheets, are compatible with most automated adhesive SBS plate sealers.

Supplier: VWR Collection

These films are 240 µm thick white vinyl with adhesive, for use with white microplates. Light reflective properties of the film, when used to seal clear bottom plates, maximise the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers. White films have also been used as a backing matrix for microscopy of punch-out samples from filter plates.

Supplier: Thermo Fisher Scientific

Effective sealing of all microplate formats. For storage, PCR, microscopy, culture and protection.

Supplier: VWR Collection

Pre-cut aluminum foil seals on a roll for PCR applications. Supplied on a roll with holder for ease of use.

Supplier: VWR Collection

Polyester seals feature a strong adhesive to minimise evaporation during PCR and storage applications.

Supplier: VWR Collection

These 77,5 µm thick polyester films provide secure sealing around every well, not just a cover, thus minimising evaporation, preventing spillage and well-to-well contamination, and eliminating 'edge effects' in sensitive ELISA assays. Polyester films can also be used with cell culture plates for short-term storage, incubation, and containment of biohazards.

Supplier: Avantor

J.T.Baker®, Microplate seal, Mat (48 wells), Single sheet/mat/strip, Capmat for J.T.Baker plate square well 48, Well top shape: Square, EVA, Transparent, Pierceable, Non sterile

Supplier: Thermo Fisher Scientific

Polyester film with acrylic adhesive. Provides an effective seal for all MicroWell™ plates used in PCR and cell culture.

Supplier: VWR Collection

These soft, non permeable 63,5 µm thick aluminium foils, with strong medical grade adhesive, eliminate the need for heat sealing devices or mats during thermal cycling. Compared to other aluminium foils, these foils have less tendency to roll back on themselves when removing the backing paper, and fit well to the plate during application.

Supplier: VWR Collection

50 µm polyolefin films with 50 µm inert encapsulated silicone adhesive. Especially suited for qPCR, storage and protein crystallisation applications. The encapsulated silicone adhesive is non tacky until pressed against the sealing surface, at which time adhesive is released only in sealing areas to form the strongest available heat resistant seal around each well on the plate.

Supplier: BIOTIX

Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, Sealing tape, for 96 well PCR plates

Supplier: VWR Collection

Aluminium foils with biologically inert adhesive. These foils are easily pierced by manual or automated pipette tips, for sample recovery without generation of aerosols or cross-contamination.

Supplier: VWR Collection

Transparent polyester films with strong, non absorbing, non fluorescing, medical grade adhesive for superior performance in qPCR applications. Supplied non sterile.

Supplier: VWR Collection

Sealing mats made of EVA (Ethylene Vinyl Acetate), suitable for square well plates.

Supplier: VWR Collection

Aluminum foils for use with 96-well or 384-well plates. Foils offer excellent chemical resistance (DMSO).

Supplier: VWR Collection

Polyester film with acrylic adhesive. These non pierceable films in sheeted-roll format are recommended for ELISA tests, general incubation and short-term storage.

Supplier: VWR Collection

Aluminium foils with biologically inert adhesive. These foils are easily pierced by manual or automated pipette tips, for sample recovery without generation of aerosols or cross-contamination.

Supplier: VWR Collection

Easier to apply and remove as compared to standard moulded PCR strip caps.

Supplier: Simport Scientific

Superflex™, Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, Closure for SuperFlex™ 96-well PCR plates, PP, Clear, Non sterile

Supplier: VWR Collection

Square well cap mats for sealing 96-well shallow or deep well plates.