You searched for: Mops
Regardless of where the mess is located, mops and squeegees efficiently reestablish spotless and safe work spaces. Choose between foam and the traditional microfiber yarn strand designs for high liquid absorption to maintain critical aseptic environments. Ergonomic pole handles on dry and wet mops allow easy manipulation for even the hard to reach areas. Designed for heavy duty or routine use, mop heads can easily be cleaned in between uses or replaced for convenience. VWR offers various lightweight steam mops that are easy to manuever and spray mops that are perfect for laboratory floor cleaning. Microfibers are best suited for dry and wet mopping for glass and high gloss surfaces making them streak free. The microfiber strands effectively remove tiny dirt particles which are often ignored by other mops. Our brushes section has a wide selection of countertop dusting brushes and floor scrub brushes for deeper cleaning requirements which you may not find in a local store.
VWR®, Cleanroom Mops
Supplier: VWR Collection
100% polyester string mops. Double clear poly bagged for cleanroom use. Good chemical sorbancy. Ideal for application of cleaning solutions on floors in critical environments.
Expand 3 Items
VWR® Tubular Knit Mop Heads
Supplier: VWR Collection
Tubular-knit, 100% polyester string mop heads feature excellent sorbency.
Expand 3 Items
Cleanroom mops, PocketMop™
Supplier: MICRONOVA
These mop can be used for controlled environments and is economical enough to compete with commercial mops that are often used in support or non-classified areas.
Expand 4 Items
Mops, PowerHead™
Supplier: MICRONOVA
Mop head is constructed of polyester-covered foam mop heads are available both nonsterile and sterile for critical cleaning. Absorbent foam mop head is for pharmaceutical production and buffer areas. Wide-pore foam mop head and dense urethane foam mop head are for cleanroom support and maintenance areas.
Expand 4 Items
Mop heads, cleanroom, PurSPONGE
Supplier: VWR Collection
Suitable for wet wiping in sterile areas and cleanrooms. One-piece, made from highly absorbent polyurethane. The coated mop heads are particularly suitable for disinfecting rough or sharp-edged surfaces while still ensuring excellent take-up of liquids.
Expand 7 Items
VWR®, Flat Cleanroom Mops
Supplier: VWR Collection
Foam with 100% polyester cover. For applying disinfectants during pharmaceutical production or for aseptic processes. The flat mop head is ideally suited for cleaning large surfaces such as floors, walls and ceilings. Low profile, thick padding and angled head for ease of use.
Expand 5 Items
VWR®, Self-wringing Mopping System
Supplier: VWR Collection
This mopping system can be used without a wringer. It is ideal for applying disinfectants to floors, walls and ceilings. The high performance foam for cleanrooms enables excellent, lasting liquid transfer.
Expand 4 Items
Flat mops
Supplier: MICRONOVA
These brick-style, flat sponge mop heads are excellent for applying disinfectant in pharmaceutical production or aseptic processing applications.
Expand 5 Items
NovaSnap™ Mops
Supplier: MICRONOVA
This low-touch flat mop uses a simple snap-on, step-release clip action for improved cleanliness and ergonomics. Simply align the components and push into place. The ergonomic unit weighs less than 2 pounds (0,8 kilos) – handle, adapter, and NovaSnap™ mop.
Expand 1 Items
String mops, NovaKnit™
Supplier: MICRONOVA
A series of robust and absorbent tubular knit string mops for cleaning and liquid pick-up in controlled and critical environments. Available with a choice of durable, reusable fabrics.
Expand 4 Items
Flathead mop covers and hardware, Slimline™
Supplier: MICRONOVA
A series of elasticised slipcovers, with urethane foam interiors, that are ideal for fine cleaning and sanitising all surfaces and equipment in the cleanroom. Available without a foam interior or gamma irradiated for aseptic environments.
Expand 7 Items
Mop heads, DryMop™
Supplier: MICRONOVA
For dusting and dry mopping large surface areas.
Expand 3 Items
Mops, LoopMop™
Supplier: MICRONOVA
Knitted polyester mop for applying disinfectant in pharmaceutical, aseptic processing and medical device applications. Absorbent enough to clean to a dry finish but will leave enough moisture for disinfectants that require an extended drying time. Mop heads can be used directly with the fibreglass/polypropylene handle or attached to the universal handle via the quick disconnect adapter.
Expand 2 Items
Mops, PolyGen™
Supplier: MICRONOVA
The dual-action abrasive mesh is specially adapted to pharmaceutical and biotech projects. Heads used directly with the fibreglass/PP handle or attached to the universal handle via the quick disconnect adapter.
Expand 2 Items
Mops, MicroMop™
Supplier: MICRONOVA
MicroMop™ are ideal for quick and efficient cleaning of large surface areas. Suitable for wafer processing, electronics, pharmaceutical, and biotech applications. All mop heads attach to stainless steel universal handle via the orange polypropylene quick disconnect adapter. For less critical applications, choose the fibreglass/polypropylene handle with attached adapter.
Expand 3 Items
Microfiber string mops, M-Zone MegaSorb™
Supplier: MICRONOVA
A highly absorbent mop that combines the cleaning efficiency of microfibre with the ease of a looped string mop. The tufted strands are comprised of polyester and nylon filaments, designed to pick up liquids and tiny particles in controlled and critical environments.
Expand 3 Items
Tubular string mops, PharmaPly™ PolyCellulose™
Supplier: MICRONOVA
An extremely lightweight, tubular string mop that is ideal for covering large surface areas quickly and efficiently in controlled environments, pharmaceutical support areas, hospitals, and laboratories where stringent cleaning routines are imperative.
Expand 2 Items
T-Mop™ Cleanroom Mop Covers
Supplier: MICRONOVA
A series of rounded T-mop covers with snaps that easily roll down walls, as well as clean awkward corners, tight spaces, and under equipment. Available in a range of fabrics for specialised cleaning.
Expand 25 Items
Covered sponge mops, PadMop™
Supplier: MICRONOVA
This fully padded, brick-style flat mop is designed to apply generous amounts of disinfectant to cope with railings, shelving, door jambs, corners, and large surface areas in pharmaceutical production areas.
Expand 2 Items
Mop heads, dry
Supplier: MICRONOVA
Mops absorb detergent quickly and may be used on floors, walls, and ceilings without a bucket or wringer.
Expand 1 Items
Mops, MegaSwat™
Supplier: MICRONOVA
These flat, paddle-shaped mops are for sliding behind heavy cabinets and process equipment, over piping and underneath calibrated equipment. Mop heads measure (W×D) 406×3 mm.
Expand 4 Items
Flathead mop covers, SnapMop™
Supplier: MICRONOVA
A range of lightweight, snap-on flat head mop covers with urethane foam interiors, designed for effective cleaning and sanitising in the cleanroom. A variety of fabric options provide excellent absorbency, effective cleaning, and disinfectant dispersal for specialised cleaning.
Expand 15 Items
Mops, Curtain Cleaner™
Supplier: MICRONOVA
A spring loaded, clamp mop that works to clean and sanitize vinyl strip curtains by clamping at the top and sliding down, effectively cleaning both sides at once. Ideal for critical environments, cleanroom support, and industrial applications.
Expand 6 Items
Slip-on mop covers MZone™ FlatMop™
Supplier: MICRONOVA
These slip-on, tab removal flat head mop covers are ideal for cleaning and sanitising all surfaces and equipment in the cleanroom. A choice of fabric options provide excellent absorbency, effective cleaning, and disinfectant dispersal for specialised cleaning.
Expand 1 Items
Isolator Cleaning Tools
Supplier: MICRONOVA
The Isolator Tool™ adapter with a 360° swivel works with a range of mop covers to efficiently clean and disinfect isolators, hoods, RABS, and small equipment in clean and aseptic areas.
Expand 11 Items
SlideMop™ Mops
Supplier: MICRONOVA
A simple, effective mop system featuring sturdy, collapsible plates that easily slide into the quilted polyester mop cover for use in traditional 'dip and wring' methods, or as a 'saturation' method where liquid disposal and/or space-saving is a factor.
Expand 2 Items
Econo CurtainCleaner™ tool and covers
Supplier: MICRONOVA
Clean vinyl strip curtains easily and efficiently with a simple 'tuning fork' style frame that grips the curtain at the top and slides down, effectively cleaning both sides at once. Designed for cleanroom use. Gamma irradiated covers available for aseptic areas.
Expand 5 Items
Dual plate mop adapter, LyoTool™
Supplier: MICRONOVA
A dual-plated mop, specially designed to clean the top and bottom of lyophiliser shelves with one pass. The adjustable, compression fit plates ensure even pressure and consistent contact for optimal sanitisation. Works well on any variety of equipment shelves spaced 3 to 6" apart.
Expand 8 Items
RollerTool™ adapters and irradiated covers
Supplier: MICRONOVA
A custom mop with dual, curved plates, designed specifically for 3" roller bottle incubators, to clean upper and lower rollers at the same time. Can also be used for small piping and other cylindrical cleanroom surfaces.
Expand 3 Items
Mopping systems, EasyCurve™
Supplier: CONTEC
Contec’s EasyCurve™ Mop was designed specifically for critical and controlled environments, now available with a ribbed microfiber face giving users smooth and easy mopping for better particle pick up and contamination removal. The combination of the curved mop face and the pivoting connector results in effortless surface contact and outstanding maneuverability, making the EasyCurve™ an ideal cleaning tool for ceilings, walls and floors. Available in nonsterile and validated sterile versions.