You searched for: Adapters, Joints with Tube Connectors
Adapters have joints with tube connections in various configurations to fit any reaction system. These bent or straight adapters are fabricated from borosilicate glass to provide a leak-proof fit with other glass instruments. Some models are designed for use as a vent or for the introduction of vacuum or pressure, while others have reinforced taper outer joints and hose connections with a stopcock plug. Fitted disk adapters prevent solids from being introduced into the system.
VWR® Adapters with Stopcock and Connector
Supplier: VWR Collection
Borosilicate 3.3 glass.
Expand 8 Items
Adapters with tube connector
Supplier: Lenz Laborglas GmbH & CO.KG
DURAN®, borosilicate glass, clear.
Expand 2 Items
Ground joint tube fittings, for pressure upto 5 Bar, BOLA
Supplier: Bohlender
PTFE, white. For connecting tubes or tubing to vessels with ground joint. For inserting and fixing probes, thermometers, dip tubes or cables.
Expand 5 Items
Adapters with tube connector, DURAN®
Supplier: DWK Life Sciences
DURAN®, borosilicate glass 3.3, clear.
Expand 3 Items
Adapters with stopcock and connector
Supplier: Lenz Laborglas GmbH & CO.KG
DURAN®, borosilicate glass, clear.
Expand 1 Items
Adapters with stopcock and connector
Supplier: Lenz Laborglas GmbH & CO.KG
DURAN®, borosilicate glass.
Expand 7 Items
Adapters with tube connector
Supplier: Lenz Laborglas GmbH & CO.KG
DURAN®, borosilicate glass.
Expand 8 Items
Vacuum adapter, GL thread, PTFE, BOLA
Supplier: Bohlender
This vacuum adapter is made of PTFE with O-ring made of FKM for secure placement of standard filter cartridges made of glass or plastic on flasks with GL 45 thread.
Expand 1 Items
Multiple distributors with ground joints, BOLA
Supplier: Bohlender
PTFE, white. For bottles or reaction vessels with ground joint. For transferring liquids without contamination. For connection to a liquid source or a pressure or vacuum system.
Expand 1 Items
Adapters, for stopCock, LaboPlast®
Supplier: BURKLE
Adapter, 3/4 " thread inflowing side on thread Hünersdorff outflowing side, PP, red, PP
Expand 7 Items
Vacuum adapter, ground joint, PTFE, BOLA
Supplier: Bohlender
This vacuum adapter is made of PTFE with O-ring made of FKM for secure placement of standard filter cartridges made of glass or plastic on vessels and round flasks with ground joint.
Expand 2 Items
105° angled tube adapter with 24/40 Standard Taper joint, PYREX®
Supplier: Corning
These angled tube adapters are made of PYREX® borosilicate glass.
Expand 1 Items
105° vacuum connecting adapters with [ST] joints, PYREX®
Supplier: Corning
This distillation adapter tube with sidearm has an outer joint at the top and an inner-sealed through drip tip joint at the bottom.
Expand 2 Items
75° angled tube adapter with two-way 24/40 Standard Taper joints, PYREX®
Supplier: Corning
These angled two-way adapters are made of PYREX® borosilicate glass.
Expand 1 Items
Adapters, cone with stopcock, Quickfit®
Supplier: SciLabware
Adapter, PYREX®, borosilicate glass, Quickfit® joints, clear.
Expand 1 Items
Connecting adapters, for rotary evaporators to vials
Supplier: CHEMGLASS
These adapters permit the connection of standard laboratory dram sample vials directly to the vapor tube or a bump trap of a rotary evaporator.
Expand 6 Items
Adapters, thermometer, inlet
Supplier: CHEMGLASS
Adapters have a No.7 chem-thread at at the top for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 4 and 7 mm.
Expand 2 Items
Adapters, inlet, with cone
Supplier: CHEMGLASS
Adapters allow for flexible tubing to be connected to apparatus for introduction of vacuum or pressure. Hose connection has a 10 mm O.D. at the largest serration and is bent downward at a 90° angle to the cone.