You searched for: Bottle Closures
Bottle closures allow for safe transfer of liquid media by securely closing jars or roller bottles. Various liners offer additional solvent resistance while permeable styles successfully filter during gas exchange and media sterilization procedures. Protect samples even under harsh freeze-drying lyophilization or autoclaving conditions with temperature tolerant caps. Compression caps for microscale reaction containers support stable observations. Disposable and reusable threaded caps are offered in many colours with or without septas.
Screw caps, DURAN® PURE Premium
Supplier: DWK Life Sciences
Premium caps are produced and assembled with previously specially cleaned PTFE coated silicone seals. Made from Fluoropolymer (PFA - TpCh260TZ).
Expand 3 Items
Screw caps, DURAN® PURE Premium STERICLIN®-Packed, DURAN®
Supplier: DWK Life Sciences
STERICLIN®-packaging offers a sterile barrier system (SBS).
Expand 2 Items
Multiple distributors for bottles, EX, BOLA
Supplier: Bohlender
Black screw cap, made of conductive PPS-EX, for GL 45 threaded bottles and distributor body made of conductive PTFE-EX.
Expand 2 Items
Seals for threaded connection caps, double sided, BOLA
Supplier: Bohlender
Silicone ring with double-sided PTFE washer. After assembly, the product is only exposed to PTFE.
Expand 7 Items
Disposable aseptic transfer cap for disposable spinner flask, Corning®
Supplier: Corning
These disposable Corning® spinner flask aseptic transfer caps will both reduce contamination and enhance the productivity of your cell culture operations when adding or removing medium and cells.
Expand 6 Items
Distributors for bottles
Supplier: Bohlender
Black screw cap made of PPS and available with or without stopcocks. Distributor body made of PTFE with 2 or 3 ports with female thread UNF 1/4" 28 G on upper and lower sides and stopcock made of FEP for each port.
Expand 8 Items
Distributors for reaction vessels (S), BOLA
Supplier: Bohlender
PP screw cap, blue and PTFE body.
Expand 3 Items
Center cap assembly for 3 to 36 L Proculture® spinner flasks, 120 mm, Corning®
Supplier: Corning
120 mm center cap assembly for Proculture® Spinner Flasks.
Expand 3 Items
Over-caps, 45 mm, black phenolic, DURAN®
Supplier: DWK Life Sciences
The 45 mm phenolic over-cap screws down over the open-top aluminium GL 45 cap covering and protecting the septum or stopper.
Expand 1 Items
Corning® Direct Overhead Drive Center Cap Assembly for Corning® Reusable Spinner Flasks, Corning
Supplier: Corning
The 120 mm Center Cap Assembly for Corning® Spinner Flasks is designed for use with direct overhead drive motor.
Expand 1 Items
Connection system GL 45, DURAN®
Supplier: DWK Life Sciences
Connection system with PP screw cap GL 45 with two or three PTFE ports. Flexible modular system. Typical applications: safe transfer of liquid media within a closed and sterile system (evaporation is reduced).
Expand 2 Items
Screw caps for bottles and jars, KIMBLE®
Supplier: KIMBLEKONTES
Phenolic, black cap, with cone shaped liner.
Expand 2 Items
Multiport connector caps, GL 32, DURAN®
Supplier: DWK Life Sciences
The reusable GL 32 caps allow the smaller 50 ml round or 100 ml DURAN® square bottles to be used be used for sampling, liquid feeding or transfer. Flexible options of 2, 3, or 4 stainless steel tubing connectors.The barbed male tubing connector are suitable for tubing with a 3,2 mm inner diameter such as BPT peristaltic pump tubing.
Expand 3 Items
Replacement caps for class A volumetric flasks, Corning®
Supplier: Corning
Replacement Phenolic GPI threaded cap , Corning®, Thread: 18-410
Expand 1 Items
Screw closures for narrow neck square bottles with thread
Supplier: Kautex
Degassing closure, red, with tamper evident ring and venting liner, For: Narrow neck bottles, Thread: 32 mm, For bottles: 100 - 1000 ml
Expand 6 Items
Closures for bottles, narrow neck, round, with thread
Supplier: Kautex
Screw caps, hinged closure, Screw closure, with hinged cap, Thread: 22 mm, For bottles: 50/100/250 ml, Colour: White, PP
Expand 1 Items
Screw Closures for Wide Neck Bottle Series 303, PP
Supplier: Kautex
Leakproof polypropylene screw closures are packaged in polyethylene bags.
Expand 4 Items
Screw Closures for Narrow Neck Bottle Series 301 and 302, LDPE
Supplier: Kautex
LDPE screw closures are packaged in polyethylene bags.
Expand 1 Items
Closures for bottles, with seal ring, PP
Supplier: SEMADENI
PP closure, with PE sealing ring
Expand 2 Items
Replacement Closure, HDPE
Supplier: Kautex
HDPE replacement closure for carboys.
Expand 1 Items
Closures for narrow neck bottles, square
Supplier: SEMADENI
Screw caps for packaging bottles.
Expand 2 Items
Screw caps for narrow neck bottles, square, with thread, for bottles "SafeGrip" series
Supplier: Kautex
Screw closure, with PTFE insert and tamper evident ring, Thread: 32 mm, For bottles: 50 - 500 ml, Colour: Blue, PP
Expand 1 Items
Screw caps, PP, white, with PTFE-Insert and tamper evident ring
Supplier: Kautex
Screw cap, with PTFE-insert and tamper evident ring, Screw closure PP, white, with tamper evident ring and PTFE cup seal, For: Narrow neck bottles "Clear Grip", series 310, Colour: White, PP, Thread: 32 mm, For bottles: 100 - 250 ml
Expand 1 Items
Screw caps, PP, black with PE foam insert
Supplier: Kautex
PP, black with PE foam insert.
Expand 6 Items
Screw caps for bottles with narrow neck, 301 and 302 series
Supplier: Kautex
LDPE, translucent.