You searched for: Cooling/Freezing Boxes and Bags

Supplier: VWR Collection

These mini coolers are an alternate to ice buckets for keeping reagents and enzymes cool.

Supplier: VWR Collection

Polycarbonate cooler, with floating inserts.

Supplier: VWR Collection

Container PC, closure and vial holder HDPE, foam insert.

Supplier: VWR Collection

This robust cooler is consistent and reliable. It is made from engineered PP with a PC lid. The modern design cools faster in freezers and stays cold longer on the bench top.

Supplier: VWR Collection

−20 °C mini labtop cooler PC, non toxic gel: The −20 °C mini labtop cooler holds 12×0,5 or 1,5 ml microcentrifuge tubes at below −20 °C for over one hour. Ideal for bench top use or transport. Filled with non toxic gel. Prior to use, place in −25 °C freezer for at least 24 hours, store at −25 °C between use.

Supplier: EPPENDORF

IsoTherm benchtop cooler.

Supplier: EPPENDORF

Cool samples safely and efficiently using the Eppendorf® IsoTherm-System. Choose between IsoPacks for 0 °C and –21 °C and use the IsoRack for centrifuging, transporting, or storing, ensuring constant temperature maintenance throughout your workflow.

Supplier: KARTELL

Cooling boxes are low temperature containers made of high impact polystyrene material, thermally isolated by means of a polyurethane isolating jacket.

Supplier: Bel-Art Products, a Part of SP

This benchtop sized cooler with polycarbonate body and clear polycarbonate lid, holds twelve 15 ml centrifuge or cryo vials at a temperature below 0 °C for approximately 3 hours. Store at –20 °C for a few hours until the temperature of the cooler falls below 0 °C.

Supplier: Corning

These storage boxes are the ideal solution to store samples over an extended period of time. Engineered to simplify sample identity as its polypropylene structure is meant to last.

Supplier: Argos Technologies

Quit running to the freezer for more ice.

Supplier: Brand

PP

Supplier: REVCO TECHNOLOGIES

Benchtop cooler −20 °C.

Supplier: HEATHROW

Protect temperature-sensitive samples at the bench or in the freezer.

Supplier: Bel-Art Products, a Part of SP

Easy-to-use unit provides 'controlled rate' freezing samples at approximately −1 °C per minute, which is needed to prevent lethal intracellular freezing and successful cryopreservation. Prior to inserting vials, the unit should be filled with 250 ml of 100% isopropyl alcohol. Once the samples have been inserted the unit should be placed in a −80 °C mechanical freezer.

Supplier: Bel-Art Products, a Part of SP

Polycarbonate cooler body and lid, gel-filled.

Supplier: HEATHROW

Cooling containers with nest lid beneath the bucket or pan are made of rigid single-molded polyurethane to provide the durability needed for chilling temperature sensitive samples.

Supplier: Brand

PC, yellow, with clear lid. Maintains temperature of 0 °C for 60 min.

Supplier: Bel-Art Products, a Part of SP

Polycarbonate cooler body gel-filled with clear polycarbonate lid.

Supplier: Thermo Fisher Scientific

PC, non-toxic insulating solution.

Supplier: Thermo Fisher Scientific

PC container with blue HDPE lid, white HDPE tube holder and foam insert.

Supplier: Thermo Fisher Scientific

Labtop coolers −20 °C.
PC, blue.
Lower section filled with a non toxic gel, with handle.
471-0000/471-0001: Will maintain a temperature below –15 °C for up to 2 hours.
Sixteen inserts included convert 1,5 ml holes to accept either 0,5 or 0,2 ml tubes.