You searched for: Stirring Tools

Supplier: Bohlender

Stirring Tools, BOLA, Shaft, propeller, with three 45° angled blades, PTFE, Stirrer Ø: 200 mm, Shaft Ø: 16 mm, Shaft length: 1200 mm

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the impeller completely made of PTFE with three blades bent backwards.

Supplier: Bohlender

Stirrer bearings made of PTFE, provides a safe seat in the reactor lid. The stirrer shaft is held by an invisible shaft guide made of borosilicate glass which has an adjustable vacuum sealing.

Supplier: Bohlender

Conductor made of borosilicate glass with or without ground joint.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the two paddles arranged crosswise at 90° completely made of PTFE.

Supplier: Bohlender

These bearings have sealing rings to ensure a perfect seal. A special gasket made of PTFE and a FPM o-ring which is compressed by a GL screw cap ensure the stirrer shaft is sealed.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the impeller completely made of PTFE with six radial paddles.

Supplier: Bohlender

PTFE, with PFA support ring. The baffle can be mounted at any position on a temperature probe or a solo stirrer shaft.

Supplier: Bohlender

These POM couplings are ideal for balancing misalignment of axes between stirrer and stirrer shaft. Suitable for glass, metal or Bola stirrer shafts. Both models are suitable for rotational speeds of up to 1200 rpm and can be used for both right and left-handed rotation.

Supplier: Bohlender

Combination of borosilicate glass piece with ground joint, an interior PTFE shaft guide with integrated special gasket and a GL screw cap made
of polyphenylene sulphide.

Supplier: Bel-Art Products, a Part of SP

Stirring paddle made of HDPE, suitable for mixing liquids in large vats and tanks.

Supplier: Bel-Art Products, a Part of SP

The Spinbar® restrainer fits ergonomically in one hand, and when placed alongside the outer wall of a mixing vessel it retains and secures the stirring bar in position.

Supplier: Bel-Art Products, a Part of SP

This retriever is able to remove a magnetic stirring bar without coming into contact with the contents of the vessel.

Supplier: Brand

Magnetic stirring bar retriever, Stirring Tools, Length: 250 mm

Supplier: Bel-Art Products, a Part of SP

Magnetic stirring bar retriever, with hang-up loop at one end, Spinbar®, Length: 457 mm

Supplier: Brand

PP-encapsulated stirring bar retrievers for removing magnetic rods from flasks of all kinds.

Supplier: Bohlender

PTFE-encapsulated stirring bar retrievers with extra strong permanent magnet (Neodym). For the removal of stirring bars from aggressive liquids. Especially useful for big, heavy stirring bars up to 400 g.

Supplier: Bohlender

Bearing necks for receiving tandem magnetic stirring bar. The centre portion will fix to the vessel by means of glue such as silicone hardened in water.

Supplier: CHEMGLASS

These grease-free PTFE stirrer bearings consist of a threaded glass adapter with the listed inner joint, a saddle o-ring, a body bushing with a compression and locking nut, and a precision PTFE inner bearing.