You searched for: Presaturated Cleanroom Wipes

Supplier: VWR Collection

These non woven wipes, made from 45% polyester and 55% cellulose, are designed for cleaning laminar flow benches, cleanroom surfaces and general process equipment. The wipe is pre-saturated with semiconductor grade solvent (70% IPA/30% DIW) for safe storage, mixing and dispensing.

Supplier: KIMBERLY CLARK

The 100% polypropylene wipers come pre-saturated with 70% isopropyl alcohol (semiconductor grade) and 30% deionized water, in a resealable pouch.

Supplier: KIMBERLY CLARK

This sterile non woven PP wipe is pre-saturated with 70% isopropyl alcohol and 30% deionized water. Recommended for the most critical wiping tasks in ISO Class 4 or higher cleanroom environments.

Supplier: CONTEC

This non woven, meltblown PP wipe is pre-saturated with 91% isopropanol and 9% deionised water.

Supplier: CONTEC

These non woven PP wipes are saturated with 70% denatured ethyl alcohol and 30% deionised water.

Supplier: CONTEC

The SATWipes are made of pure non woven polyester that is hydraulically entangled creating a soft, durable and clean wipe. The saturation of either alcohol/deionised water or 100% alcohol provides a safe and mild cleaning solution.

Supplier: CONTEC

This durable wipe is made from 100% non woven polyester fibers, hydroentagled into an extremely soft, clean, and strong fabric which is very low in both particles and extractables.

Supplier: Texwipe

These pre-wetted wipes are made of a fabric blend of 55% non woven hydroentangled cellulose and 45% polyester.

Supplier: Texwipe

These highly sorbent wipes are made from 100% continuous filament polyester in a double-knit, 'no run' interlock pattern. The wipes are pre-wetted with 70% IPA and 30% deionised water.

Supplier: Texwipe

These wipes are constructed from a 100% melt-blown PP substrate that is pre-wetted with 70% isopropyl alcohol and 30% DIW (filtered through a 0,2 μm filter).

Supplier: Texwipe

This 100% continuous filament polyester wipe with thermally sealed borders is engineered to have the lowest level of releasable particles and fibres for critical and sterile environments. The wipe is pre-wetted with 70% USP IPA.

Supplier: Texwipe

These wipes constructed from a hydroentangled polyester/cellulose blend are pre-wetted with 70% isopropyl alcohol and 30% DIW (filtered through a 0,2 μm filter). Each package is gamma irradiated to 10⁻⁶ Sterility Assurance Level.

Supplier: Texwipe

These 100% continuous filament, polyester knit fabric wipes are made from virgin stock and processed on Texwipe’s Vertex® manufacturing system. The Vertex® manufacturing process cleans and converts wipes in an integrated, hands-free micro environment. The wipes are manufactured in an ISO class 3 environment with a small physical footprint which provides for a more sustainable process.

Supplier: Texwipe

These 100% continuous filament polyester wipe with thermally sealed borders have been designed to control particle and fibre contamination. They are pre-wetted with 70% USP Isopropyl Alcohol (IPA) and 30% Water for Injection (WFI).