You searched for: Syringes for Chromatography

Supplier: VWR Collection

Super flexible plunger.

Supplier: VWR Collection

Standard micro syringes for GC with fixed needle.

Supplier: VWR Collection

Fine fixed needle, with special polished blunt tip, specific length and diameter, ensures a complete seal, preventing damage to needle seals and rotor.

Supplier: VWR Collection

Micro syringe with fixed needle for high sensitivity GC analysis and ultra-minute volumes.

Supplier: VWR Collection

Micro syringes without needle
General purpose Luer lock connector for use with autosamplers and liquid handling instruments. All parts in contact with sample are made from neutral borosilicate glass and PTFE. This provides excellent performance and an inert sample environment.

Supplier: Hospidex

For ultra-precise analyses. The plunger extends down into the tip of the needle ensuring that no dead volume is created.

Supplier: Hospidex

Providing ultra-precise analyses. The plunger extends down into the tip of the needle ensuring that no dead volume is created.

Supplier: Hospidex

Microsyringes for Agilent instruments.

Supplier: Hospidex

Super elastic plunger is made of special Ti-Ni alloy which has superior flexibility and it does not have any problem with friction damage caused by plunger bending. It simply springs back, if the plunger is bent.

Supplier: HAMILTON BONADUZ

The Digital Syringe™ is a calibrated device composed of a serialised syringe and a serialised digital electronic holder.

Supplier: HAMILTON BONADUZ

Developed specifically for the neurosciences, these syringes minimise injection site damage by increasing needle rigidity and delivering a micro volume of liquid to an exact location.

Supplier: HAMILTON BONADUZ

These syringes are the Gastight® version of the original 700 series syringes and are ideal for dispensing volumes from 1 µl up to 500 µl.

Supplier: HAMILTON BONADUZ

The Bubble Free Prime (BFP) syringe is specifically designed for the Microlab® 600 series and the only syringe type compatible with the instrument. It has a conical plunger tip that extends through the threaded termination and into the valve. This unique design expels the air from the syringe and valve decreasing the number of priming cycles required.

Supplier: HAMILTON BONADUZ

The needle points of these thin layer chromatography syringes are covered with a PTFE coating which reduces the surface tension between the needle and the liquid making it ideal for reproducible sample spotting.

Supplier: HAMILTON BONADUZ

Super syringes with PTFE Luer lock (TLL) connector or tracheal adapter.

Supplier: HAMILTON BONADUZ

Gastight syringes for use with gases or liquids. Designed with or without ChemSeal (C) termination.

Supplier: HAMILTON BONADUZ

The 600 series syringes are a half stroke version of the original 700 series syringes. This series of syringes is ideal for dispensing volumes from 0,25 μl up to 5 μl. The 600 series is often used in applications that require one handed operation because of the short stroke length and the reinforced plunger.

Supplier: HAMILTON BONADUZ

The 900 series syringe is the economical version of the 800 series syringe. This series of syringes is ideal for dispensing volumes from 0,5 μl up to 10 μl. The syringe holder is permanently attached to the syringe barrel. This reduces the initial cost of the syringe but eliminates the possibility of replacement components.

Supplier: HAMILTON BONADUZ

NR = Rheodyne needle
RNR = Replacement Rheodyne needle

Supplier: HAMILTON BONADUZ

These gas tight syringes are designed for HPLC autosamplers.

Supplier: HAMILTON BONADUZ

The 1800 series is the reinforced plunger version of the 1700 series syringe. Attached to the flange of the syringe is a removable blue syringe holder that prevents heat transfer, dispense inaccuracies and plunger blow outs. It also provides support to small volume plungers that are prone to bending during injection.

Supplier: HAMILTON BONADUZ

These GC syringes are suitable for Bruker Varian Chrompack autosamplers.

Supplier: HAMILTON BONADUZ

Universal injection syringes for GC. Similar to the 700 series but with a reinforced, protected plunger.

Supplier: HAMILTON BONADUZ

The 700 series syringe is the original hand-fitted Hamilton syringe. This series of syringes is ideal for dispensing volumes from 0,5 to 500 µl. The stainless steel plunger is manufactured to fit the glass barrel with a tolerance smaller than 100 millionths of an inch, resulting in unsurpassed syringe life. Each syringe is manufactured to achieve the highest level of accuracy and precision possible.

Supplier: HAMILTON BONADUZ

The 1000 series is a mid volume Gastight® syringe. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision machined PTFE plunger tip which creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe barrel free of sample. This feature is particularly useful with heterogeneous samples as it reduces the chance that a deposit will occur and cause the plunger to freeze.

Supplier: HAMILTON BONADUZ

Suitable for applications such as GC, TLC and micro pipetting. Manufactured according to the principle of dead volume by positive pressure. A tungsten piston is introduced into the syringe as far as the tip of the needle. Needle and piston are calibrated against each other and must be changed at the same time in the event of replacement.

Supplier: Trajan Scientific and Medical

These high pressure syringes are designed for high pressure gas sampling.

Supplier: Trajan Scientific and Medical

These 10 µl metal plunger syringes with stainless steel needle are ideal for making microvolume injections of 1,5 to 8 µl. Each plunger is individually fitted for each microsyringe for perfect sealing.

Supplier: Trajan Scientific and Medical

These cavro syringes are a type of instrument syringes used in chromatography.

Supplier: Trajan Scientific and Medical

* Gas-tight.