Try our pump finder tool or configure a complete system
Simple tools to get top recommended peristaltic pumps or configure your system by choosing compatible components.
Try our pump finder tool or configure a complete system
Simple tools to get top recommended peristaltic pumps or configure your system by choosing compatible components.
You searched for: Pumps
Pumps efficiently transport liquids or remove moisture and gases from a variety of different-sized containers. The devices are used for dispensing and general liquid-handling purposes. Ergonomic, handheld designs allow for continued comfort and one-handed operation. For the best reproducibility, digital pumps can be programmed to dispense precisely measured samples into culture plates, vials, tubes, or bottles. Pumps can measure in different units depending on preference.
Masterflex® B/T® Rapid-Load Pump Heads, Avantor®
Supplier: Avantor Fluid Handling
Convert your existing motor into a high-capacity Masterflex® B/T® drive.
Expand 2 Items
Hand-Operated FDA Compliant Drum Pumps
Supplier: Avantor Fluid Handling
Ideal for most acid/base or ionic salt applications.
Expand 1 Items
Plastic Hand-Operated Heavy-Duty Acid-Transfer Hand Pumps
Supplier: Avantor Fluid Handling
Ideal for most acid/base or ionic salt applications.
Expand 4 Items
Masterflex® Ismatec® Reglo Independent Channel Control (ICC) Panel-Mount Peristaltic Pumps, Avantor®
Supplier: Avantor Fluid Handling
Independently control flow and direction of each channel via keypad or your PC.
Expand 4 Items
Pump sets for concentrated acids/alkalis
Supplier: BURKLE
These drum pumps are suitable for highly aggressive acids and alkalis, such as sulphuric acid, nitric acid, hydrofluoric acid, sodium hypochlorite and more.
Expand 2 Items
Polypropylene (PP) Moderate-Flow Chemical-Resistance Centrifugal Pumps
Supplier: Avantor Fluid Handling
Twin bearing system handles thrust loads for extended service life.
Expand 6 Items
Masterflex® Mechanically Coupled Self-Priming Centrifugal Pumps, Avantor®
Supplier: Avantor Fluid Handling
Chemical-resistance pump heads provide dependable performance and continuous service.
Expand 3 Items
FMI Valveless Piston Pump Heads, Series Q
Supplier: Avantor Fluid Handling
No valves to clog or wear out.
Expand 6 Items
Warren Rupp Air-Powered Double-Diaphragm PVDF Pumps
Supplier: Avantor Fluid Handling
Move fluids with viscosities up to 11,000 cp.
Expand 4 Items
Masterflex® L/S® Easy-Load® Long-Shaft Pump Heads, Avantor®
Supplier: Avantor Fluid Handling
Save time with fast tubing changes and reduced maintenance.
Expand 3 Items
Hand-Operated Rotary Drum Pumps
Supplier: Avantor Fluid Handling
Dispense a variety of liquids compatible with polypropylene, Ryton® PPS, cast iron, aluminum, stainless steel, or PTFE.
Expand 5 Items
American Machine & Tool Straight 316 SS Standard Centrifugal Pumps
Supplier: Avantor Fluid Handling
Investment cast stainless steel (SS) pumps are built sturdier for heavy-duty, high performance applications requiring excellent chemical resistance.
Expand 1 Items
Masterflex® L/S® PTFE-Diaphragm Pump Heads, Avantor®
Supplier: Avantor Fluid Handling
Compatible with most Masterflex® L/S® drives.
Expand 2 Items
Polypropylene (PP) High-Head Chemical-Resistance Centrifugal Pumps
Supplier: Avantor Fluid Handling
Twin bearing system handles thrust loads for extended service life.
Expand 4 Items
Plastic Hand-Operated Siphon/Lift Pail Pump
Supplier: Avantor Fluid Handling
Ideal for most acid/base or ionic salt applications.
Expand 1 Items
VWR® VP 220, Chemical Duty, High Performance Diaphragm Pump
Supplier: VWR Collection
The VP 220 is ideal for rotary evaporators providing the powerful vacuum needed for demanding evaporations without the use of oil pumps. VP 220 has built-in Advanced Vapour Management (AVM) which means precise control capability for the distillation of organic solvents and applications handling aggressive vapours and gases. The VP 220 is especially effective for rotary evaporation of low boiling point solvents such as acetone and ethanol and is able to rapidly strip DMF at 35 °C. The pump parts are all made of corrosion resistant materials such as PTFE and Kalrez to handle aggressive vapours, and together with vacuum adjustment, the evaporation process will be optimised. Use the vacuum adjustment to increase the vacuum until bubbles form in the evaporation flask - then lower it slightly. Reduce the vacuum for fast reaction to bumping or foaming.
Expand 1 Items
Mini Diaphragm Vacuum Pump LABOPORT®
Supplier: KNF
Single- or dual-headed, dry running diaphragm pumps for a wide variety of applications in laboratories. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated. The pump includes a PTFE-coated diaphragm with patented tension optimisation, which allows the pump to be smaller and prolongs the service life of the diaphragm, it is ideal for aggressive/corrosive gases and vapors.
Expand 5 Items
Bürkle Stainless Steel Barrel Pumps for Flammable Liquids
Supplier: Avantor Fluid Handling
Safely transfer flammable and combustible liquids with ease.
Expand 2 Items
Diaphragm Vacuum Pumps LABOPORT® SD
Supplier: KNF
Chemically resistant, oil-free diaphragm vacuum pump featuring PTFE heads, PTFE-coated diaphragms and FFPM valves. An integrated self-drying system prevents the accumulation of condensates within the pump heads. Ideal for applications with exceedingly wet vapors.
Expand 3 Items
Masterflex® Two-Stage High-Pressure Centrifugal Pumps, Avantor®
Supplier: Avantor Fluid Handling
Two-stage design gives superior output pressures.
Expand 1 Items
Masterflex® Self-Priming Petroleum Centrifugal Pumps, Avantor®
Supplier: Avantor Fluid Handling
Compatible with three distinct fuel classifications.
Expand 1 Items
Continuous-Duty Double-Diaphragm Pumps
Supplier: Avantor Fluid Handling
No metal wetted parts permit use with corrosive liquids.
Expand 1 Items
Masterflex® L/S® Standard Pump Heads for Precision Tubing, Avantor®
Supplier: Avantor Fluid Handling
Ideal for fluid transfer applications requiring high accuracy and repeatability.
Expand 15 Items
Masterflex® I/P® Digital Precision Modular Drive Systems, Avantor®
Supplier: Avantor Fluid Handling
Place motor and controller where convenient with modular design.
Expand 2 Items
Solvent pumps, hand operated
Supplier: BURKLE
Hand-operated solvent pump for contamination free removal of organic solvents and flavouring agents. All medium-contacting parts are made of stainless steel AISI 304 (1.4301) and PTFE.
Expand 2 Items
Foot-Operated Pump Dispensers for Barrels, Canisters, and Tanks
Supplier: Avantor Fluid Handling
Keep hands-free for safe dispensing.
Expand 3 Items
Masterflex Ultrapharm™ L/S® Pump Heads, Avantor®
Supplier: Avantor Fluid Handling
Every drop counts—integrate into automated filling systems for high accuracy dosing and dispensing.
Expand 4 Items
Plastic Hand-Operated Siphon/Lift Drum Pump
Supplier: Avantor Fluid Handling
Ideal for most acid/base or ionic salt applications.
Expand 1 Items
Diaphragm vacuum pumps, LABOPORT®
Supplier: KNF
This diaphragm pumps is double-head, dry-running devices used in a wide range of laboratory applications.
Expand 1 Items
ITT Jabsco High-Purity Air-Operated Double-Diaphragm Pumps
Supplier: Avantor Fluid Handling
Unique air valve ensures a positive shift every time – pump will not stall.