634 Resultat för: "VICI JOUR RESEARCH"

Supplier: VICI JOUR RESEARCH

ETFE.

Supplier: VICI JOUR RESEARCH

Skärare för kapning av PTFE, PEEK och andra polymerslangar.

Supplier: VICI JOUR RESEARCH

PEEK one-piece fingertight fittings. Work with all ¹/₁₆'' OD tubings and female 10 to 32 ports. They are rated to 350 bar and can be used with virtually any HPLC fittings, eg. Swagelok, Parker, Rheodyne, Valco.

Supplier: VICI JOUR RESEARCH

These fittings are designed for capillary LC, used in HTS techniques, proteomics, genomics, and other newer developments in industrial research requiring small sample size for reduction of analysis time, fittings and unions are easy to handle.

Supplier: VICI JOUR RESEARCH

Precolumn filter kit has a standard 10 to 32 fitting and fits direct to most column types without introducing an additional dead volume.

Supplier: VICI JOUR RESEARCH

Packing kit, PEEK, for in-line guard cartridge system, complete, includes slurry reservoir, packing adapter and packing seals

Supplier: VICI JOUR RESEARCH

FEP, natural or coloured.

Supplier: VICI JOUR RESEARCH

Unions for easy connection of low pressure solvent lines.

Supplier: VICI JOUR RESEARCH

These disposable in-line filters offer an easy and cost-effective way to protect valuable columns against particles.

Supplier: VICI JOUR RESEARCH

These stainless steel 316 sample loops are cut using an electrolytic cutting process followed by ultrasonic and high pressure steam cleaning to remove contaminants, dried and capped with softener free caps to avoid the recontamination of the tubing.

Supplier: VICI JOUR RESEARCH

The in-line PEEK guard cartridges extend the life of analytical columns by trapping contaminants from the sample and mobile phase, thereby preventing loss of retention. Only PEEK and titanium contacts the mobile phase and sample. This system is ideal for use with proteins or other biopolymers that may be contaminated or absorbed by steel surfaces.

Supplier: VICI JOUR RESEARCH

The Easy-Flange flange-rolling tool for flanged fittings is suitable for PTFE and PTFE-like tubing with O.Ø. between ¹/₁₆ and ¹/₈".

Supplier: VICI JOUR RESEARCH

PEEK tubing has the strength required to withstand continuous use at HPLC pressure without swelling or bursting, and is not affected by halide salts, high strength buffers, or other aggressive mobile phases that corrode stainless steel.

Supplier: VICI JOUR RESEARCH

För att öppna och dra åt ¹/₄'' muttrar.

Supplier: VICI JOUR RESEARCH

One-piece hex-head fittings made from PEEK are easy to use with the ValvTool and the Color-It Color-Coded Fingertight adapters. The 10-32 thread is suitable for standard high-pressure female connections. They are available both in a short and long version.

Supplier: VICI JOUR RESEARCH

These PTFE tubings are biocompatible, chemically inert and suitable for lower or mild pressure applications.

Supplier: VICI JOUR RESEARCH

PTFE.

Supplier: VICI JOUR RESEARCH

PEEK flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: VICI JOUR RESEARCH

Ferrule, SS bushing, PEEK, For tubing ext.Ø: 1/32"

Supplier: VICI JOUR RESEARCH

The Easy-Flange flange-rolling tool has been developed for flanging all PTFE and PTFE-like tubes with Ext.Ø between ¹/₁₆' and ¹/₈' where fittings requiring a flange.

Supplier: VICI JOUR RESEARCH

Stainless steel with PE caps and colour coded sleeves.

Supplier: VICI JOUR RESEARCH

Replacement cutting wheel

Supplier: VICI JOUR RESEARCH

The air inlet valve has a check valve which blocks vapours of the solution in a bottle, preventing the vapours from escaping into the lab. The safety air outlet filter regulates the pressure during helium sparging.

Supplier: VICI JOUR RESEARCH

GL 45 safety caps seal to the bottle with an O-ring (EPDM) which is resistant to commonly used HPLC solvents. If improved chemical resistance is required (e.g. for halogenated hydrocarbons), order an FEP-coated O-ring separately.

Supplier: VICI JOUR RESEARCH

These caps top bottles are available with two, three, or four colour-coded 1/4-28 thread for ¹/₈ or ¹/₁₆" O.Ø tubing.

Supplier: VICI JOUR RESEARCH

VICI Jour PEEK unions are usable with most common HPLC solvents (organic and inorganic) without the risk of corrosion, metal contamination, or protein degradation that might occur with stainless steel. Connections to these PEEK unions can be made with any 10 to 32 fitting that uses a polymeric ferrule. The unions use the standardized Valco fitting details with smooth transition of the taper into the threaded part.

Supplier: VICI JOUR RESEARCH

Titanium frits are preferred over stainless steel frits for the application related to the analysis of sensitive substances such as biomolecules.

Supplier: VICI JOUR RESEARCH

Connectors for low pressure applications are machined from PEEK.

Supplier: VICI JOUR RESEARCH

Mellanfilter, PEEK, Förp.: 1

Supplier: VICI JOUR RESEARCH

Peek one-piece hex-head fittings, with their integrated ferrule, are easy to use with the valve-tool and the colour-it colour-coded finger-tight adapters. PEEK one-piece hex-head fittings are available in short and long versions.