1129 Resultat för: "LABCONCO"

Supplier: LABCONCO

All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Supplier: LABCONCO

Organic carbon filters for Protector® work stations with built-in blower, 5,4 kg, 457×914×250 mm

Supplier: LABCONCO

These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).

Supplier: LABCONCO

Beakers specifically designed for the Goldfisch Fat Extractor. Thick-walled borosilicate glass with flanged and ground tops to facilitate connection to the condenser.

Supplier: LABCONCO

Purifier HEPA filtered enclosures protect the user from agents that require biosafety level 1, 2 or 3 containment but no product protection. With ergonomic air foil with aerodynamic clean-sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil.

Supplier: LABCONCO

XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters, carbon filters, or a combination of both HEPA and carbon filters.

Supplier: LABCONCO

XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters.

Supplier: LABCONCO

Förångare, centrifugal, Glass trap, 2550 ml, for use in FreeZone freeze dry units

Supplier: LABCONCO

The FreeZone® bulk and stoppering tray dryers have a stainless steel interior and epoxy coated, stainless steel exterior. Units include three probes for monitoring sample and shelf temperature. Microprocessor controlled temperature programming from −40 to +40 °C during ramping and holding in stoppering tray dryers, whereas in bulk dryers a microprocessor maintains the system temperature within 3 °C of the set point (maximum 60 °C). Units have an LCD display and audible/visual alarm indication for temperature and vacuum changes.

Supplier: LABCONCO

Accessory for freeze dryer, 16-portars torkkammare, rostfritt stål 330×330 mm, för Freezone® 6, 12 och 18 l

Supplier: LABCONCO

Solid epoxy dished work surface, for 91,4 cm enclosures, 34 kg, 914×737×25,4 mm

Supplier: LABCONCO

The refrigerated CentriVap centrifugal concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature. The concentrator combines a refrigeration system that cools to −4 °C with a heater that warms to 100 °C to achieve the user's desired set point temperatures. With an epoxy-coated aluminum chamber.

Supplier: LABCONCO

Racks and supports hold test tubes, flasks and microwell plates for pre-freezing and freeze drying samples; clear canister holds chemical traps.

Supplier: LABCONCO

Heated product shelves with clear chamber for drying bulk samples, or drying serum bottles, vials or microplates. Chamber connects to a FreeZone® freeze dryers for control and recording of the shelf temperature from the Lyo-Works display.

Supplier: LABCONCO

These kits are for thimble ducting class II, type A2 biosafety cabinets.

Supplier: LABCONCO

WaterPro RO stations feature large capacity filters and membrane to deliver high-quality reverse osmosis (RO) purified water (type III). RO purified water is ideal for laboratory applications such as reagent preparation and glassware rinsing. The units be connected to glassware washers to provide purified rinse water.

Supplier: LABCONCO

Storage cabinet accessories, Protector®, Solvent vent kit consisting metal flexible hose Ø 38 mm, two hose clamps and slip fit outlet adapter

Supplier: LABCONCO

End-Zone™ provides an alternative to visual inspection making it easy to determine when freeze drying is complete.

Supplier: LABCONCO

Accessory for Freeze Dryer, 14-Port manifold, 304 stainless steel with fourteen neoprene valves and latching pin, accomodates both 1/2” and 3/4” adapters, 617×269×262 mm

Supplier: LABCONCO

The AtmosPure™ Re-Gen gas purifier produces an ultrapure inert atmosphere for materials sensitive to moisture and/or oxygen by circulating an inert gas and removing oxygen and moisture inside the box.

Supplier: LABCONCO

[EN]CABINET BIOSAFETY 4FT LOGIC CLASS II 1 * 1 Items

Supplier: LABCONCO

[EN]FREEZE DRYER 6L -50C CONSL SST PRG/S 1 * 1 Items

Supplier: LABCONCO

[EN]FREEZE DRYER 6L -84C CONSL FD SST ST 1 * 1 Items

Supplier: LABCONCO

[EN]FREEZE DRYER 6L -84 CONSL FD PTFE ST 1 * 1 Items

Supplier: LABCONCO

[EN]FREEZE DRYER 12L -50C CONSL SST STD 1 * 1 Items

Supplier: LABCONCO

[EN]FREEZE DRYER 6L -84 CONSL PTFE PRG/S 1 * 1 Items

Supplier: LABCONCO

[EN]FREEZE DRYER 18L -50 CONSL FD PTFE S 1 * 1 Items

Supplier: LABCONCO

[EN]CHAMBER ASSEMBLY STAINLESS STEEL 1 * 1 Items

Supplier: LABCONCO

[EN]FREEZE DRYER FREEZONE TRIAD 230V, 50 1 * 1 Items

Supplier: LABCONCO

[EN]EXHAUST HEPA FILTER 6 FOOT MODEL 1 * 1 Items