Supplier: LABCONCO

Black solid epoxy work sufaces of nominal width 5 inch, 1524×902×25,4 mm, 70 kg

Supplier: LABCONCO

XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters, carbon filters, or a combination of both HEPA and carbon filters.

Supplier: LABCONCO

Accessory for freeze dryer, 16-portars torkkammare, rostfritt stål 330×330 mm, för Freezone® 6, 12 och 18 l

Supplier: LABCONCO

XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters.

Supplier: LABCONCO

Racks and supports hold test tubes, flasks and microwell plates for pre-freezing and freeze drying samples; clear canister holds chemical traps.

Supplier: LABCONCO

WaterPro RO stations feature large capacity filters and membrane to deliver high-quality reverse osmosis (RO) purified water (type III). RO purified water is ideal for laboratory applications such as reagent preparation and glassware rinsing. The units be connected to glassware washers to provide purified rinse water.

Supplier: LABCONCO

These kits are for thimble ducting class II, type A2 biosafety cabinets.

Supplier: LABCONCO

Heated product shelves with clear chamber for drying bulk samples, or drying serum bottles, vials or microplates. Chamber connects to a FreeZone® freeze dryers for control and recording of the shelf temperature from the Lyo-Works display.

Supplier: LABCONCO

Accessory for Freeze Dryer, 14-Port manifold, 304 stainless steel with fourteen neoprene valves and latching pin, accomodates both 1/2” and 3/4” adapters, 617×269×262 mm

Supplier: LABCONCO

End-Zone™ provides an alternative to visual inspection making it easy to determine when freeze drying is complete.

Supplier: LABCONCO

Förångare, centrifugal, Glass trap, 2550 ml, for use in FreeZone freeze dry units

Supplier: LABCONCO

These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Supplier: LABCONCO

SpillStopper™ work surface, right rear cupsink cutout, 1219×762×32 mm, 50 kg, För: Laboratory Hoods, Protector®

Supplier: LABCONCO

Storage cabinet accessory, Protector®, Interior shelf kit, 61 mm Protector® acid storage cabinets

Supplier: LABCONCO

Accessory for Freeze Dryer, Heated shelf with sensor, for bulk tray dryers, 323×432×25 mm (suitable for operating at 230 V, 50/60 Hz)

Supplier: LABCONCO

WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

Supplier: LABCONCO

Storage cabinets support fume hoods and used for storage and venting of small laboratory instruments, mild acids and other reagents.

Supplier: LABCONCO

Glassware washing machines, Retrofit kit upper rack

Supplier: LABCONCO

These PuriCare Open Access Transfer Station offer utmost efficiency for cage changing operations. Open access on two sides provides ample workspace for one or two operators to transfer animals from dirty cages to clean ones. This enclosure provides personnel, animal and environmental protection. HEPA-filtered vertical airflow provides Class 100 clean air in the work area to protect the animals from cross-contamination. At the same time, room air is drawn into grilles located on the work surface directly below the sash openings to ensure containment and protect the operator from allergens. All contaminated air inside the enclosure is filtered so that particulate-free air is exhausted back into the room, protecting the environment.

Supplier: LABCONCO

Mechanical or electrical pass-through kit, provides three pass-through ports with sealing ID ranges 0,230/0,395, 0,230/0,530 and 0,450/0,705, useful for sealing cords and plumbing (Requires installation and drill holes; installation kit 5240800 is recommended)

Supplier: LABCONCO

All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Supplier: LABCONCO

Purifier HEPA filtered enclosures protect the user from agents that require biosafety level 1, 2 or 3 containment but no product protection. With ergonomic air foil with aerodynamic clean-sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil.

Supplier: LABCONCO

Pump inlet filter

Supplier: LABCONCO

Purifier Logic+ Class II, Type B2 biosafety cabinets provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates.

Supplier: LABCONCO

These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45 dBA, depending on face velocity.

Supplier: LABCONCO

Flexible duct connections reduce vibration between the blower and PVC ductwork.

Supplier: LABCONCO

The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.

Supplier: LABCONCO

FreeZone® bench top freeze dryers are designed for lyophilising light to moderate sample loads. The compact design is ideal for laboratories with limited floor space.

Supplier: LABCONCO

This mobile system with or without heat boost combines the separate vacuum concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 13 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump — the only additional component necessary to begin processing.

Supplier: LABCONCO

These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).