1129 Results for: "LABCONCO"

Supplier: LABCONCO

Purifier Logic+ Class II Type A2 Biosafety Cabinets are suitable for work with agents that require Biosafety Level 1, 2 or 3 containment.

Supplier: LABCONCO

Accessory for Freeze Dryer, Lyph-Seal™ tray dryer 230 V, EU, W×D×H: 39,6×48,8×45,5 mm, 62,6 kg

Supplier: LABCONCO

The CentriVap micro IR vacuum concentrator has a very small footprint and therefore fits in tight spaces. It is ideal for small samples such as DNA and small throughput in molecular biology, proteomics, genomics, genetics, cell biology and drug discovery labs.

Supplier: LABCONCO

Produce up to 350 liters per minute of pure nitrogen.

Supplier: LABCONCO

Effektiv, automatiskt indunstningssystem, som kan användas för många olika aggressiva kemikalier. I RapidVap N₂-system riktas ett flöde kväve eller torr gas nedåt på provets yta. Kvävet minskar partialtrycket direkt över vätskan för att snabba indunstningen och bidra till att ta bort lösningsmedlet allt eftersom det avdunstar. Kväve kan programmeras för 2, 4, 6 eller alla 8 rörplatserna. Vortexrörelse och torr värme kan också användas för att ytterligare accelerera bearbetningen.

Supplier: LABCONCO

Benchtop freeze drying system, type 304 stainless steel with 12 ports, -75 °C. Ideal for the laboratory with occasional lyophilisation requirements, the Dry Ice Benchtop Freeze Dry System provides a simple, economical means of freeze-drying. It is equipped with a center well for dry ice and solvent that serves as a water vapour collector and doubles as a convenient pre-freezing bath. Flasks, serum bottles and ampules may be frozen by dipping and rotating them in the well. Chamber size 248 x222 mm

Supplier: LABCONCO

Flat bottom tube, 170 ml, För: RapidVap® N‚‚

Supplier: LABCONCO

Vacuum controller

Supplier: LABCONCO

Combine the separate concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 17 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump - the only additional component necessary to begin processing.

Supplier: LABCONCO

Purifier® Logic®+ type B2 biosafety cabinets combine ergonomics, comfort and safety.

Supplier: LABCONCO

These cabinets support fume hoods and safely store and vent acids and also other corrosive liquids.

Supplier: LABCONCO

Purifier Logic+ Type A2 biosafety cabinets combine ergonomics, comfort and safety.

Supplier: LABCONCO

For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC perchloric acid, protector stainless steel perchloric acid, logic+, logic, cell logic, puriCare procedure stations and protector radioisotope laboratory hoods.

Supplier: LABCONCO

Torkar

Supplier: LABCONCO

FlaskScrubber glassware washers are designed to wash and dry narrow-neck and general purpose labware. They have a lower spindle rack that holds up to 36 pieces of primarily narrow-neck glassware such as volumetric flasks. Water and detergent are pumped through the spindles to reach the innermost areas of your glassware. Forced air drying through the spindles ensures thorough drying inside and out. Specialized inserts for pipets, BOD bottles, petri dishes, culture tubes and small utensils enhance the FlaskScrubber's versatility. The washer may be outfitted with an upper standard or spindle rack to increase capacity. FlaskScrubber is a viable option for cleaning and reuse of glassware used for trace metal, volatile organic and semi-volatile organic compounds.

Supplier: LABCONCO

These FreeZone® small tray dryers provide precise control and program flexibility for consistent performance and are designed for lyophilising small to moderate bulk sample loads or numerous sample batches.

Supplier: LABCONCO

Safety sleeves, PE, Ø×L 914×457 mm, 0,038 mm thickness

Supplier: LABCONCO

This filtered glove box with fibreglass liner provides inlet and outlet HEPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials. The glove box may also be appropriate for use as a containment isolator for applications that include compounds assigned ISO 4 and ISO 5 Banding Levels.

Supplier: LABCONCO

WaterPro PS Polishing Stations deliver Type I, 18,2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1,8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

Supplier: LABCONCO

Stand, Unassembled base stands, in epoxy coated steel, nominal width of 1524 mm, 24,9 kg, with 4 leveling feet

Supplier: LABCONCO

These glove boxes with stainless steel liner provide inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials. Available with two or four glove ports (double version).

Supplier: LABCONCO

Storage cabinet accessories, Protector®, Solvent vent kit consisting metal flexible hose Ø 38 mm, two hose clamps and slip fit outlet adapter

Supplier: LABCONCO

The refrigerated CentriVap centrifugal concentrator is designed to rapidly concentrate multiple small heat-sensitive samples, such as RNA and proteins, using centrifugal force, vacuum and controlled temperature. The concentrator combines a refrigeration system that cools to −4 °C with a heater that warms to 100 °C to achieve the user's desired set point temperatures. With an epoxy-coated aluminum chamber.

Supplier: LABCONCO

The AtmosPure™ Re-Gen gas purifier produces an ultrapure inert atmosphere for materials sensitive to moisture and/or oxygen by circulating an inert gas and removing oxygen and moisture inside the box.

Supplier: LABCONCO

The FreeZone® bulk and stoppering tray dryers have a stainless steel interior and epoxy coated, stainless steel exterior. Units include three probes for monitoring sample and shelf temperature. Microprocessor controlled temperature programming from −40 to +40 °C during ramping and holding in stoppering tray dryers, whereas in bulk dryers a microprocessor maintains the system temperature within 3 °C of the set point (maximum 60 °C). Units have an LCD display and audible/visual alarm indication for temperature and vacuum changes.

Supplier: LABCONCO

Black solid epoxy work sufaces of nominal width 5 inch, 1524×902×25,4 mm, 70 kg

Supplier: LABCONCO

XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters, carbon filters, or a combination of both HEPA and carbon filters.

Supplier: LABCONCO

Accessory for freeze dryer, 16-portars torkkammare, rostfritt stål 330×330 mm, för Freezone® 6, 12 och 18 l

Supplier: LABCONCO

XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters.

Supplier: LABCONCO

Racks and supports hold test tubes, flasks and microwell plates for pre-freezing and freeze drying samples; clear canister holds chemical traps.