1491 Resultat för: "HAMILTON BONADUZ"

Supplier: HAMILTON BONADUZ

The 1800 series is the reinforced plunger version of the 1700 series syringe. Attached to the flange of the syringe is a removable blue syringe holder that prevents heat transfer, dispense inaccuracies and plunger blow outs. It also provides support to small volume plungers that are prone to bending during injection.

Supplier: HAMILTON BONADUZ

NR = Rheodyne needle
RNR = Replacement Rheodyne needle

Supplier: HAMILTON BONADUZ

Suitable for applications such as GC, TLC and micro pipetting. Manufactured according to the principle of dead volume by positive pressure. A tungsten piston is introduced into the syringe as far as the tip of the needle. Needle and piston are calibrated against each other and must be changed at the same time in the event of replacement.

Supplier: HAMILTON BONADUZ

Electrodes for special laboratory applications such as microbiological samples, serum, flat surfaces, small volumes, and samples containing fats and proteins.

Supplier: HAMILTON BONADUZ

Elektrod, pH

Supplier: HAMILTON BONADUZ

Developed specifically for the neurosciences, these syringes minimise injection site damage by increasing needle rigidity and delivering a micro volume of liquid to an exact location.

Supplier: HAMILTON BONADUZ

Robust combination pH electrodes especially suited for use in media containing proteins or solid and semi-solid samples, such as meat and cheese.

Supplier: HAMILTON BONADUZ

Neuros™, Needle, Replacement needles for 700/1700 series Neuros™ syringes, Mätare: 33, Längd: 77 mm, Spetstyp: 3

Supplier: HAMILTON BONADUZ

Kel-F® hub (KF) needles can be used with Luer Tip (LT) and PTFE Luer Lock (TLL) syringes and connectors. Custom lengths and point styles are available.

Supplier: HAMILTON BONADUZ

A variety of electrolyte solutions for pH and ORP electrodes.

Supplier: HAMILTON BONADUZ

PB600-1 fungerar med Microliter™ eller GASTIGHT®sprutor från 10 µl till 2,5 ml. Kan användas med fasta nålar (N), utbytbara nålar (RN), Luer tip (LT) eller PTFE Luer lock-sprutor (TLL).

Supplier: HAMILTON BONADUZ

Robust combination pH electrodes for daily laboratory use. Universally applicable, in strong acids as well as in strong bases.

Supplier: HAMILTON BONADUZ

Dispense tubing, volume 1,08 ml, 1372 mm, 18 gauge, FEP, Microlab®

Supplier: HAMILTON BONADUZ

These robust combination pH electrodes are suitable for general laboratory applications, especially for measurements in emulsions and suspensions.

Supplier: HAMILTON BONADUZ

475±5 mV ORP buffer

Supplier: HAMILTON BONADUZ

The 700 series syringe is the original hand-fitted Hamilton syringe. This series of syringes is ideal for dispensing volumes from 0,5 to 500 µl. The stainless steel plunger is manufactured to fit the glass barrel with a tolerance smaller than 100 millionths of an inch, resulting in unsurpassed syringe life. Each syringe is manufactured to achieve the highest level of accuracy and precision possible.

Supplier: HAMILTON BONADUZ

Hamilton storage solution is recommended to increase sensor longevity when not in use. The liquid solution is acid buffered to help with sensor response time after storage as well as prevent any biological growth.

Supplier: HAMILTON BONADUZ

Elektrod, syre

Supplier: HAMILTON BONADUZ

Conductivity standards with stability of ±1% - guaranteed over a lifetime of up to three years.

Supplier: HAMILTON BONADUZ

These syringes are the Gastight® version of the original 700 series syringes and are ideal for dispensing volumes from 1 µl up to 500 µl.

Supplier: HAMILTON BONADUZ

The Bubble Free Prime (BFP) syringe is specifically designed for the Microlab® 600 series and the only syringe type compatible with the instrument. It has a conical plunger tip that extends through the threaded termination and into the valve. This unique design expels the air from the syringe and valve decreasing the number of priming cycles required.

Supplier: HAMILTON BONADUZ

The 1000 series is a mid volume Gastight® syringe. Gastight® syringes are ideal for dispensing both liquids and gases. They have a precision machined PTFE plunger tip which creates a leak-free seal. With the tight fit, the tip essentially wipes the interior of the syringe barrel free of sample. This feature is particularly useful with heterogeneous samples as it reduces the chance that a deposit will occur and cause the plunger to freeze.

Supplier: HAMILTON BONADUZ

Polyplast electrodes have a shatterproof plastic shaft. They are ideal for portable measurements or as entry level sensors for basic laboratory applications.

Supplier: HAMILTON BONADUZ

Dessa C-linjsprutor har en direkt fästkonstruktion av nålen till cylindern som eliminerar kontakt mellan provlösningsmedlet och limet, vilket reducerar överföringen och spöktopparna. Den inerta kolvspetspolymeren ger förbättrad lösningsmedelskompatibilitet och längre livslängd.

Supplier: HAMILTON BONADUZ

Spruta, kromatografi, GC, 1701 ASN, Volym: 10 µl, Spetstyp: AS, Mätare: 23s, Förp.: 6

Supplier: HAMILTON BONADUZ

Universella sprutor för GC. Som 700-serien med förstärkt, skyddad kolv.

Supplier: HAMILTON BONADUZ

The benefit of a replaceable needle for the occasional bend or clog and the minimal dead volume of a cemented needle. The unique removable needle design installs the needle precisely at the zero line. The result is a zero dead volume connection that simplifies priming.

Supplier: HAMILTON BONADUZ

These HD headspace syringes feature a unique plunger designed specifically for the CTC PAL System COMBI xt® gas chromatography (GC) autosampler system. The High Dynamic (HD) plunger is optimised for high throughput and sets a new standard for headspace syringes.

Supplier: HAMILTON BONADUZ

The EasyFerm Plus electrodes are designed to withstand demanding applications in pharmaceutical and chemical industries. They are supplied with a pre-pressurised electrolyte which prevents the diffusion of sample into the sensor.

Supplier: HAMILTON BONADUZ

Spruta 1025 TLL, 25 ml, Microlab®